mpc85xx: add 3.10 support
authorGabor Juhos <juhosg@openwrt.org>
Sat, 20 Jul 2013 09:12:57 +0000 (09:12 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Sat, 20 Jul 2013 09:12:57 +0000 (09:12 +0000)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37472

target/linux/mpc85xx/config-3.10 [new file with mode: 0644]
target/linux/mpc85xx/patches-3.10/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-3.10/100-fix_mpc8568e_mds.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-3.10/110-fix_mpc8548_cds.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-3.10/120-mpc8548_cds_i8259_noirq_init.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-3.10/130-mpc8548_cds_disable_i8259_irq.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch [new file with mode: 0644]

diff --git a/target/linux/mpc85xx/config-3.10 b/target/linux/mpc85xx/config-3.10
new file mode 100644 (file)
index 0000000..477aab0
--- /dev/null
@@ -0,0 +1,287 @@
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_ADVANCED_OPTIONS is not set
+CONFIG_AR8216_PHY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_BOOKE=y
+CONFIG_BOUNCE=y
+# CONFIG_BSC9131_RDB is not set
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CPM2 is not set
+# CONFIG_CRYPTO_SHA1_PPC is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_DEVKMEM=y
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+# CONFIG_E200 is not set
+CONFIG_E500=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_EPAPR_BOOT is not set
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_PCI=y
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_SOC_BOOKE=y
+CONFIG_FSL_ULI1575=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_GE_FPGA is not set
+# CONFIG_GE_IMP3A is not set
+CONFIG_GIANFAR=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_MPC8XXX=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+# CONFIG_IPIC is not set
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_ISA_DMA_API=y
+CONFIG_KERNEL_START=0xc0000000
+# CONFIG_KSI8560 is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LOWMEM_CAM_NUM=3
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LXT_PHY=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MATH_EMULATION is not set
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIGRATION=y
+# CONFIG_MII is not set
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_MODULES_USE_ELF_RELA=y
+# CONFIG_MPC8536_DS is not set
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+CONFIG_MPC85xx_CDS=y
+# CONFIG_MPC85xx_DS is not set
+CONFIG_MPC85xx_MDS=y
+CONFIG_MPC85xx_RDB=y
+CONFIG_MPIC=y
+# CONFIG_MPIC_MSGR is not set
+# CONFIG_MPIC_U3_HT_IRQS is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+# CONFIG_NONSTATIC_KERNEL is not set
+CONFIG_NR_IRQS=512
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND=y
+CONFIG_P1010_RDB=y
+# CONFIG_P1022_DS is not set
+# CONFIG_P1022_RDK is not set
+# CONFIG_P1023_RDS is not set
+# CONFIG_P2041_RDB is not set
+# CONFIG_P3041_DS is not set
+# CONFIG_P4080_DS is not set
+# CONFIG_P5020_DS is not set
+# CONFIG_P5040_DS is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+# CONFIG_PCIEASPM_POWERSAVE is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PHYLIB=y
+CONFIG_PHYSICAL_ALIGN=0x04000000
+CONFIG_PHYSICAL_START=0x00000000
+# CONFIG_PHYS_64BIT is not set
+# CONFIG_PPA8548 is not set
+CONFIG_PPC=y
+CONFIG_PPC32=y
+# CONFIG_PPC64 is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_PPC_970_NAP is not set
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_BOOK3E_MMU=y
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+CONFIG_PPC_DOORBELL=y
+# CONFIG_PPC_E500MC is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+# CONFIG_PPC_EPAPR_HV_PIC is not set
+CONFIG_PPC_FSL_BOOK3E=y
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_ICP_HV is not set
+# CONFIG_PPC_ICP_NATIVE is not set
+# CONFIG_PPC_ICS_RTAS is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PPC_LIB_RHEAP=y
+CONFIG_PPC_MMU_NOHASH=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_OF=y
+# CONFIG_PPC_P7_NAP is not set
+CONFIG_PPC_PCI_CHOICE=y
+# CONFIG_PPC_QEMU_E500 is not set
+# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_SMP_MUXED_IPI=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_PPC_WERROR=y
+# CONFIG_PPC_WSP is not set
+# CONFIG_PPC_XICS is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_PTP_1588_CLOCK_GIANFAR is not set
+CONFIG_QE_GPIO=y
+CONFIG_QUICC_ENGINE=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SBC8548 is not set
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_QE is not set
+CONFIG_SIMPLE_GPIO=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOCK_DIAG=y
+# CONFIG_SOCRATES is not set
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPE=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_ESPI=y
+CONFIG_SPI_FSL_LIB=y
+CONFIG_SPI_MASTER=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_STX_GP3 is not set
+CONFIG_SWCONFIG=y
+CONFIG_SWIOTLB=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TL_WDR4900_V1=y
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+CONFIG_UCC=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_TX_ON_DEMAND is not set
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WORD_SIZE=32
+# CONFIG_XES_MPC85xx is not set
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_XZ_DEC_POWERPC=y
diff --git a/target/linux/mpc85xx/patches-3.10/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-3.10/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
new file mode 100644 (file)
index 0000000..e79edbe
--- /dev/null
@@ -0,0 +1,10 @@
+--- a/arch/powerpc/platforms/85xx/common.c
++++ b/arch/powerpc/platforms/85xx/common.c
+@@ -27,6 +27,7 @@ static struct of_device_id __initdata mp
+       { .compatible = "fsl,mpc8548-guts", },
+       /* Probably unnecessary? */
+       { .compatible = "gpio-leds", },
++      { .compatible = "gpio-keys", },
+       /* For all PCI controllers */
+       { .compatible = "fsl,mpc8540-pci", },
+       { .compatible = "fsl,mpc8548-pcie", },
diff --git a/target/linux/mpc85xx/patches-3.10/100-fix_mpc8568e_mds.patch b/target/linux/mpc85xx/patches-3.10/100-fix_mpc8568e_mds.patch
new file mode 100644 (file)
index 0000000..ba706f6
--- /dev/null
@@ -0,0 +1,32 @@
+--- a/arch/powerpc/boot/dts/mpc8568mds.dts
++++ b/arch/powerpc/boot/dts/mpc8568mds.dts
+@@ -317,6 +317,9 @@
+                       gpios = <&bcsr5 3 0>;
+               };
+       };
++      chosen {
++              linux,stdout-path = "/soc8568@e0000000/serial@4500";
++      };
+ };
+ /include/ "fsl/mpc8568si-post.dtsi"
+--- a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
++++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
+@@ -134,17 +134,8 @@
+       };
+-      duart-sleep-nexus {
+-              #address-cells = <1>;
+-              #size-cells = <1>;
+-              compatible = "simple-bus";
+-              sleep = <&pmc 0x00000002>;
+-              ranges;
+-
+ /include/ "pq3-duart-0.dtsi"
+-      };
+-
+       L2: l2-cache-controller@20000 {
+               compatible = "fsl,mpc8568-l2-cache-controller";
+               reg = <0x20000 0x1000>;
diff --git a/target/linux/mpc85xx/patches-3.10/110-fix_mpc8548_cds.patch b/target/linux/mpc85xx/patches-3.10/110-fix_mpc8548_cds.patch
new file mode 100644 (file)
index 0000000..3ca1bcc
--- /dev/null
@@ -0,0 +1,40 @@
+--- a/arch/powerpc/boot/dts/mpc8548cds_32b.dts
++++ b/arch/powerpc/boot/dts/mpc8548cds_32b.dts
+@@ -75,6 +75,9 @@
+                       ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+               };
+       };
++      chosen {
++              linux,stdout-path = "/soc8548@e0000000/serial@4600";
++      };
+ };
+ /*
+--- a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
++++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
+@@ -131,7 +131,24 @@
+ /include/ "pq3-i2c-0.dtsi"
+ /include/ "pq3-i2c-1.dtsi"
+-/include/ "pq3-duart-0.dtsi"
++
++      serial0: serial@4600 {
++              cell-index = <1>;
++              device_type = "serial";
++              compatible = "fsl,ns16550", "ns16550";
++              reg = <0x4600 0x100>;
++              clock-frequency = <0>;
++              interrupts = <42 2 0 0>;
++      };
++
++      serial1: serial@4500 {
++              cell-index = <0>;
++              device_type = "serial";
++              compatible = "fsl,ns16550", "ns16550";
++              reg = <0x4500 0x100>;
++              clock-frequency = <0>;
++              interrupts = <42 2 0 0>;
++      };
+       L2: l2-cache-controller@20000 {
+               compatible = "fsl,mpc8548-l2-cache-controller";
diff --git a/target/linux/mpc85xx/patches-3.10/120-mpc8548_cds_i8259_noirq_init.patch b/target/linux/mpc85xx/patches-3.10/120-mpc8548_cds_i8259_noirq_init.patch
new file mode 100644 (file)
index 0000000..81b9193
--- /dev/null
@@ -0,0 +1,23 @@
+--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
++++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+@@ -247,15 +247,16 @@ static int mpc85xx_cds_8259_attach(void)
+               return -ENODEV;
+       }
++      i8259_init(cascade_node, 0);
++      of_node_put(cascade_node);
++
+       cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+       if (cascade_irq == NO_IRQ) {
+-              printk(KERN_ERR "Failed to map cascade interrupt\n");
++              of_node_put(cascade_node);
++              printk(KERN_DEBUG "No interrupt for i8259 PIC\n");
+               return -ENXIO;
+       }
+-      i8259_init(cascade_node, 0);
+-      of_node_put(cascade_node);
+-
+       /*
+        *  Hook the interrupt to make sure desc->action is never NULL.
+        *  This is required to ensure that the interrupt does not get
diff --git a/target/linux/mpc85xx/patches-3.10/130-mpc8548_cds_disable_i8259_irq.patch b/target/linux/mpc85xx/patches-3.10/130-mpc8548_cds_disable_i8259_irq.patch
new file mode 100644 (file)
index 0000000..9b2c7bb
--- /dev/null
@@ -0,0 +1,13 @@
+--- a/arch/powerpc/boot/dts/mpc8548cds.dtsi
++++ b/arch/powerpc/boot/dts/mpc8548cds.dtsi
+@@ -293,8 +293,10 @@
+                               #address-cells = <0>;
+                               #interrupt-cells = <2>;
+                               compatible = "chrp,iic";
++/*
+                               interrupts = <0 1 0 0>;
+                               interrupt-parent = <&mpic>;
++*/
+                       };
+                       rtc@70 {
diff --git a/target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch
new file mode 100644 (file)
index 0000000..8407176
--- /dev/null
@@ -0,0 +1,616 @@
+From 406d86e5990ac171f18ef6e2973672d8fbfe1556 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 20 Feb 2013 08:40:33 +0100
+Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
+ board
+
+This patch adds support for the TP-Link TL-WDR4900 v1
+concurrent dual-band wireless router. The devices uses
+the Freescale P1014 SoC.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/powerpc/boot/Makefile                  |    3 +
+ arch/powerpc/boot/cuboot-tl-wdr4900-v1.c    |  164 ++++++++++++++++++++++++++
+ arch/powerpc/boot/dts/tl-wdr4900-v1.dts     |  166 +++++++++++++++++++++++++++
+ arch/powerpc/boot/wrapper                   |    4 +
+ arch/powerpc/platforms/85xx/Kconfig         |   11 ++
+ arch/powerpc/platforms/85xx/Makefile        |    1 +
+ arch/powerpc/platforms/85xx/tl_wdr4900_v1.c |  145 +++++++++++++++++++++++
+ 7 files changed, 494 insertions(+)
+ create mode 100644 arch/powerpc/boot/cuboot-tl-wdr4900-v1.c
+ create mode 100644 arch/powerpc/boot/dts/tl-wdr4900-v1.dts
+ create mode 100644 arch/powerpc/platforms/85xx/tl_wdr4900_v1.c
+
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -98,6 +98,8 @@ src-plat-$(CONFIG_EMBEDDED6xx) += cuboot
+ src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
+ src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
+ src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c
++src-plat-$(CONFIG_TL_WDR4900_V1) += cuboot-tl-wdr4900-v1.c
++
+ src-wlib := $(sort $(src-wlib-y))
+ src-plat := $(sort $(src-plat-y))
+@@ -278,6 +280,7 @@ image-$(CONFIG_TQM8555)                    += cuImage.tqm
+ image-$(CONFIG_TQM8560)                       += cuImage.tqm8560
+ image-$(CONFIG_SBC8548)                       += cuImage.sbc8548
+ image-$(CONFIG_KSI8560)                       += cuImage.ksi8560
++image-$(CONFIG_TL_WDR4900_V1)         += cuImage.tl-wdr4900-v1
+ # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
+ image-$(CONFIG_STORCENTER)            += cuImage.storcenter
+--- /dev/null
++++ b/arch/powerpc/boot/cuboot-tl-wdr4900-v1.c
+@@ -0,0 +1,164 @@
++/*
++ * U-Boot compatibility wrapper for the TP-Link TL-WDR4900 v1 board
++ *
++ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Based on:
++ *  cuboot-85xx.c
++ *     Author: Scott Wood <scottwood@freescale.com>
++ *     Copyright (c) 2007 Freescale Semiconductor, Inc.
++ *
++ *  simpleboot.c
++ *     Authors: Scott Wood <scottwood@freescale.com>
++ *              Grant Likely <grant.likely@secretlab.ca>
++ *     Copyright (c) 2007 Freescale Semiconductor, Inc.
++ *     Copyright (c) 2008 Secret Lab Technologies Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ops.h"
++#include "types.h"
++#include "io.h"
++#include "stdio.h"
++#include <libfdt.h>
++
++BSS_STACK(4*1024);
++
++static unsigned long bus_freq;
++static unsigned long int_freq;
++static u64 mem_size;
++static unsigned char enetaddr[6];
++
++static void process_boot_dtb(void *boot_dtb)
++{
++      const u32 *na, *ns, *reg, *val32;
++      const char *path;
++      u64 memsize64;
++      int node, size, i;
++
++      /* Make sure FDT blob is sane */
++      if (fdt_check_header(boot_dtb) != 0)
++              fatal("Invalid device tree blob\n");
++
++      /* Find the #address-cells and #size-cells properties */
++      node = fdt_path_offset(boot_dtb, "/");
++      if (node < 0)
++              fatal("Cannot find root node\n");
++      na = fdt_getprop(boot_dtb, node, "#address-cells", &size);
++      if (!na || (size != 4))
++              fatal("Cannot find #address-cells property");
++
++      ns = fdt_getprop(boot_dtb, node, "#size-cells", &size);
++      if (!ns || (size != 4))
++              fatal("Cannot find #size-cells property");
++
++      /* Find the memory range */
++      node = fdt_node_offset_by_prop_value(boot_dtb, -1, "device_type",
++                                           "memory", sizeof("memory"));
++      if (node < 0)
++              fatal("Cannot find memory node\n");
++      reg = fdt_getprop(boot_dtb, node, "reg", &size);
++      if (size < (*na+*ns) * sizeof(u32))
++              fatal("cannot get memory range\n");
++
++      /* Only interested in memory based at 0 */
++      for (i = 0; i < *na; i++)
++              if (*reg++ != 0)
++                      fatal("Memory range is not based at address 0\n");
++
++      /* get the memsize and trucate it to under 4G on 32 bit machines */
++      memsize64 = 0;
++      for (i = 0; i < *ns; i++)
++              memsize64 = (memsize64 << 32) | *reg++;
++      if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
++              memsize64 = 0xffffffff;
++
++      mem_size = memsize64;
++
++      /* get clock frequencies */
++      node = fdt_node_offset_by_prop_value(boot_dtb, -1, "device_type",
++                                           "cpu", sizeof("cpu"));
++      if (!node)
++              fatal("Cannot find cpu node\n");
++
++      val32 = fdt_getprop(boot_dtb, node, "clock-frequency", &size);
++      if (!val32 || (size != 4))
++              fatal("Cannot get clock frequency");
++
++      int_freq = *val32;
++
++      val32 = fdt_getprop(boot_dtb, node, "bus-frequency", &size);
++      if (!val32 || (size != 4))
++              fatal("Cannot get bus frequency");
++
++      bus_freq = *val32;
++
++      path = fdt_get_alias(boot_dtb, "ethernet0");
++      if (path) {
++              const void *p;
++
++              node = fdt_path_offset(boot_dtb, path);
++              if (node < 0)
++                      fatal("Cannot find ethernet0 node");
++
++              p = fdt_getprop(boot_dtb, node, "mac-address", &size);
++              if (!p || (size < 6)) {
++                      printf("no mac-address property, finding local\n\r");
++                      p = fdt_getprop(boot_dtb, node, "local-mac-address", &size);
++              }
++
++              if (!p || (size < 6))
++                      fatal("cannot get MAC addres");
++
++              memcpy(enetaddr, p, sizeof(enetaddr));
++      }
++}
++
++static void platform_fixups(void)
++{
++      void *soc;
++
++      dt_fixup_memory(0, mem_size);
++
++      dt_fixup_mac_address_by_alias("ethernet0", enetaddr);
++      dt_fixup_cpu_clocks(int_freq, bus_freq / 8, bus_freq);
++
++      /* Unfortunately, the specific model number is encoded in the
++       * soc node name in existing dts files -- once that is fixed,
++       * this can do a simple path lookup.
++       */
++      soc = find_node_by_devtype(NULL, "soc");
++      if (soc) {
++              void *serial = NULL;
++
++              setprop(soc, "bus-frequency", &bus_freq, sizeof(bus_freq));
++
++              while ((serial = find_node_by_devtype(serial, "serial"))) {
++                      if (get_parent(serial) != soc)
++                              continue;
++
++                      setprop(serial, "clock-frequency", &bus_freq,
++                              sizeof(bus_freq));
++              }
++      }
++}
++
++void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
++                   unsigned long r6, unsigned long r7)
++{
++      mem_size = 64 * 1024 * 1024;
++
++      simple_alloc_init(_end, mem_size - (u32)_end - 1024*1024, 32, 64);
++
++      fdt_init(_dtb_start);
++      serial_console_init();
++
++      printf("\n\r-- TL-WDR4900 v1 boot wrapper --\n\r");
++
++      process_boot_dtb((void *) r3);
++
++      platform_ops.fixups = platform_fixups;
++}
+--- /dev/null
++++ b/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
+@@ -0,0 +1,212 @@
++/*
++ * TP-Link TL-WDR4900 v1 Device Tree Source
++ *
++ * Copyright 2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++/include/ "fsl/p1010si-pre.dtsi"
++
++/ {
++      model = "TP-Link TL-WDR4900 v1";
++      compatible = "tp-link,TL-WDR4900v1";
++
++      chosen {
++              bootargs = "console=ttyS0,115200";
++/*
++              linux,stdout-path = "/soc@ffe00000/serial@4500";
++*/
++      };
++
++      aliases {
++              spi0 = &spi0;
++      };
++
++      memory {
++              device_type = "memory";
++      };
++
++      soc: soc@ffe00000 {
++              ranges = <0x0 0x0 0xffe00000 0x100000>;
++
++              spi0: spi@7000 {
++                      flash@0 {
++                              #address-cells = <1>;
++                              #size-cells = <1>;
++                              compatible = "spansion,s25fl129p1";
++                              reg = <0>;
++                              spi-max-frequency = <25000000>;
++
++                              u-boot@0 {
++                                      reg = <0x0 0x0050000>;
++                                      label = "u-boot";
++                                      read-only;
++                              };
++
++                              dtb@50000 {
++                                      reg = <0x00050000 0x00010000>;
++                                      label = "dtb";
++                                      read-only;
++                              };
++
++                              kernel@60000 {
++                                      reg = <0x00060000 0x002a0000>;
++                                      label = "kernel";
++                              };
++
++                              rootfs@300000 {
++                                      reg = <0x00300000 0x00ce0000>;
++                                      label = "rootfs";
++                              };
++
++                              config@fe0000 {
++                                      reg = <0x00fe0000 0x00010000>;
++                                      label = "config";
++                                      read-only;
++                              };
++
++                              caldata@ff0000 {
++                                      reg = <0x00ff0000 0x00010000>;
++                                      label = "caldata";
++                                      read-only;
++                              };
++
++                              firmware@60000 {
++                                      reg = <0x00060000 0x00f80000>;
++                                      label = "firmware";
++                              };
++                      };
++              };
++
++              gpio0: gpio-controller@f000 {
++              };
++
++              usb@22000 {
++                      phy_type = "utmi";
++                      dr_mode = "host";
++              };
++
++              mdio@24000 {
++                      phy0: ethernet-phy@0 {
++                              reg = <0x0>;
++                              qca,ar8327-initvals = <
++                                      0x00004 0x07600000 /* PAD0_MODE */
++                                      0x00008 0x00000000 /* PAD5_MODE */
++                                      0x0000c 0x01000000 /* PAD6_MODE */
++                                      0x00010 0x40000000 /* POWER_ON_STRIP */
++                                      0x00050 0xcf35cf35 /* LED_CTRL0 */
++                                      0x00054 0xcf35cf35 /* LED_CTRL1 */
++                                      0x00058 0xcf35cf35 /* LED_CTRL2 */
++                                      0x0005c 0x03ffff00 /* LED_CTRL3 */
++                                      0x0007c 0x0000007e /* PORT0_STATUS */
++                              >;
++                      };
++              };
++
++              mdio@25000 {
++                      status = "disabled";
++              };
++
++              mdio@26000 {
++                      status = "disabled";
++              };
++
++              enet0: ethernet@b0000 {
++                      phy-handle = <&phy0>;
++                      phy-connection-type = "rgmii-id";
++              };
++
++              enet1: ethernet@b1000 {
++                      status = "disabled";
++              };
++
++              enet2: ethernet@b2000 {
++                      status = "disabled";
++              };
++
++              sdhc@2e000 {
++                      status = "disabled";
++              };
++
++              serial1: serial@4600 {
++                      status = "disabled";
++              };
++
++              can0: can@1c000 {
++                      status = "disabled";
++              };
++
++              can1: can@1d000 {
++                      status = "disabled";
++              };
++      };
++
++      pci0: pcie@ffe09000 {
++              reg = <0 0xffe09000 0 0x1000>;
++              ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
++                        0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
++              pcie@0 {
++                      ranges = <0x2000000 0x0 0xa0000000
++                                0x2000000 0x0 0xa0000000
++                                0x0 0x20000000
++
++                                0x1000000 0x0 0x0
++                                0x1000000 0x0 0x0
++                                0x0 0x100000>;
++              };
++      };
++
++      pci1: pcie@ffe0a000 {
++              reg = <0 0xffe0a000 0 0x1000>;
++              ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
++                        0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
++              pcie@0 {
++                      ranges = <0x2000000 0x0 0x80000000
++                                0x2000000 0x0 0x80000000
++                                0x0 0x20000000
++
++                                0x1000000 0x0 0x0
++                                0x1000000 0x0 0x0
++                                0x0 0x100000>;
++              };
++      };
++
++      ifc: ifc@ffe1e000 {
++              status = "disabled";
++      };
++
++      leds {
++              compatible = "gpio-leds";
++
++              system {
++                      gpios = <&gpio0 2 1>; /* active low */
++                      label = "tp-link:blue:system";
++              };
++
++              usb1 {
++                      gpios = <&gpio0 3 1>; /* active low */
++                      label = "tp-link:green:usb1";
++              };
++
++              usb2 {
++                      gpios = <&gpio0 4 1>; /* active low */
++                      label = "tp-link:green:usb2";
++              };
++      };
++
++      buttons {
++              compatible = "gpio-keys";
++
++              reset {
++                      label = "Reset button";
++                      gpios = <&gpio0 5 1>; /* active low */
++                      linux,code = <0x198>; /* KEY_RESTART */
++              };
++      };
++};
++
++/include/ "fsl/p1010si-post.dtsi"
+--- a/arch/powerpc/boot/wrapper
++++ b/arch/powerpc/boot/wrapper
+@@ -197,6 +197,10 @@ cuboot*)
+     *-mpc85*|*-tqm85*|*-sbc85*)
+         platformo=$object/cuboot-85xx.o
+         ;;
++    *-tl-wdr4900-v1)
++        platformo=$object/cuboot-tl-wdr4900-v1.o
++      link_address='0x1000000'
++        ;;
+     *-amigaone)
+         link_address='0x800000'
+         ;;
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -147,6 +147,17 @@ config STX_GP3
+       select CPM2
+       select DEFAULT_UIMAGE
++config TL_WDR4900_V1
++      bool "TP-Link TL-WDR4900 v1"
++      select DEFAULT_UIMAGE
++      select ARCH_REQUIRE_GPIOLIB
++      select GPIO_MPC8XXX
++      help
++        This option enables support for the TP-Link TL-WDR4900 v1 board.
++
++        This board is a Concurrent Dual-Band wireless router with a
++        Freescale P1014 SoC.
++
+ config TQM8540
+       bool "TQ Components TQM8540"
+       help
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_T4240_QDS)   += t4240_qds.o
+ obj-$(CONFIG_B4_QDS)    += b4_qds.o corenet_ds.o
+ obj-$(CONFIG_STX_GP3)   += stx_gp3.o
+ obj-$(CONFIG_TQM85xx)   += tqm85xx.o
++obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
+ obj-$(CONFIG_SBC8548)     += sbc8548.o
+ obj-$(CONFIG_PPA8548)     += ppa8548.o
+ obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
+--- /dev/null
++++ b/arch/powerpc/platforms/85xx/tl_wdr4900_v1.c
+@@ -0,0 +1,145 @@
++/*
++ * TL-WDR4900 v1 board setup
++ *
++ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Based on:
++ *   p1010rdb.c:
++ *      P1010RDB Board Setup
++ *      Copyright 2011 Freescale Semiconductor Inc.
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/stddef.h>
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/of_platform.h>
++#include <linux/ath9k_platform.h>
++#include <linux/leds.h>
++
++#include <asm/time.h>
++#include <asm/machdep.h>
++#include <asm/pci-bridge.h>
++#include <mm/mmu_decl.h>
++#include <asm/prom.h>
++#include <asm/udbg.h>
++#include <asm/mpic.h>
++
++#include <sysdev/fsl_soc.h>
++#include <sysdev/fsl_pci.h>
++
++#include "mpc85xx.h"
++
++void __init tl_wdr4900_v1_pic_init(void)
++{
++      struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
++        MPIC_SINGLE_DEST_CPU,
++        0, 256, " OpenPIC  ");
++
++      BUG_ON(mpic == NULL);
++
++      mpic_init(mpic);
++}
++
++#ifdef CONFIG_PCI
++static struct gpio_led tl_wdr4900_v1_wmac_leds_gpio[] = {
++      {
++              .name           = "tp-link:blue:wps",
++              .gpio           = 1,
++              .active_low     = 1,
++      },
++};
++
++static struct ath9k_platform_data tl_wdr4900_v1_wmac0_data = {
++      .led_pin = 0,
++      .eeprom_name = "pci_wmac0.eeprom",
++      .leds = tl_wdr4900_v1_wmac_leds_gpio,
++      .num_leds = ARRAY_SIZE(tl_wdr4900_v1_wmac_leds_gpio),
++};
++
++static struct ath9k_platform_data tl_wdr4900_v1_wmac1_data = {
++      .led_pin = 0,
++      .eeprom_name = "pci_wmac1.eeprom",
++};
++
++static void tl_wdr4900_v1_pci_wmac_fixup(struct pci_dev *dev)
++{
++      if (!machine_is(tl_wdr4900_v1))
++              return;
++
++      if (dev->bus->number == 1 &&
++          PCI_SLOT(dev->devfn) == 0) {
++              dev->dev.platform_data = &tl_wdr4900_v1_wmac0_data;
++              return;
++      }
++
++      if (dev->bus->number == 3 &&
++          PCI_SLOT(dev->devfn) == 0 &&
++          dev->device == 0xabcd) {
++              dev->dev.platform_data = &tl_wdr4900_v1_wmac1_data;
++
++              /*
++               * The PCI header of the AR9381 chip is not programmed
++               * correctly by the bootloader and the device uses wrong
++               * data due to that. Replace the broken values with the
++               * correct ones.
++               */
++              dev->device = 0x30;
++              dev->class = 0x028000;
++
++              pr_info("pci %s: AR9381 fixup applied\n", pci_name(dev));
++      }
++}
++
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID,
++                      tl_wdr4900_v1_pci_wmac_fixup);
++#endif /* CONFIG_PCI */
++
++/*
++ * Setup the architecture
++ */
++static void __init tl_wdr4900_v1_setup_arch(void)
++{
++      if (ppc_md.progress)
++              ppc_md.progress("tl_wdr4900_v1_setup_arch()", 0);
++
++      fsl_pci_assign_primary();
++
++      printk(KERN_INFO "TL-WDR4900 v1 board from TP-Link\n");
++}
++
++machine_arch_initcall(tl_wdr4900_v1, mpc85xx_common_publish_devices);
++machine_arch_initcall(tl_wdr4900_v1, swiotlb_setup_bus_notifier);
++
++/*
++ * Called very early, device-tree isn't unflattened
++ */
++static int __init tl_wdr4900_v1_probe(void)
++{
++      unsigned long root = of_get_flat_dt_root();
++
++      if (of_flat_dt_is_compatible(root, "tp-link,TL-WDR4900v1"))
++              return 1;
++
++      return 0;
++}
++
++define_machine(tl_wdr4900_v1) {
++      .name                   = "Freescale P1014",
++      .probe                  = tl_wdr4900_v1_probe,
++      .setup_arch             = tl_wdr4900_v1_setup_arch,
++      .init_IRQ               = tl_wdr4900_v1_pic_init,
++#ifdef CONFIG_PCI
++      .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
++#endif
++      .get_irq                = mpic_get_irq,
++      .restart                = fsl_rstcr_restart,
++      .calibrate_decr         = generic_calibrate_decr,
++      .progress               = udbg_progress,
++};