ar71xx: add support for TL-WR802N Version 2
authorThomas Roberts <tom.p.roberts@gmail.com>
Mon, 13 Feb 2017 17:29:34 +0000 (17:29 +0000)
committerJohn Crispin <john@phrozen.org>
Mon, 20 Feb 2017 08:10:17 +0000 (09:10 +0100)
This patch adds support for the TP-Link TL-WR802N Version 2.

Specification:
- SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc)
- RAM: 32 MiB
- Storage: 4 MiB of FLash on board
- Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n
- Ethernet: 1x100M (port0)

Installation through OEM Web Interface:
- Connect to TL-WR802N by Ethernet or Wi-Fi
- Go to http://192.168.0.1 (default user is "admin" & password is "admin)
- Go to "System Tools -> Firmware Upgrade"
- Browse for firmware "*.factory-us.bin" or  "*.factory-eu.bin" for eu model
- Click upgrade

Installation through tftp:
Note: T_OUT, T_IN and GND on the board must be connected to USB TTL
      Serial Configuration 115200 8n1

- Boot the TL-WR802N
- When "Autobooting in 1 seconds" appears type "tpl" followed by enter
- Connect to the board Ethernet port
    (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10)
- tftpboot 0x80000000 <Firmware Image Name>
- Record the result of "printenv bootcmd"
- Enter "erase <Result of 'printenv bootcmd'> +0x3c0000"
    (e.g erase 0x9f020000 +0x3c0000)
- Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000"
    (e.g cp.b 0x80000000 0x9f020000 0x3c0000)
- Enter "bootm <Result of 'printenv bootcmd'>"
    (e.g bootm 0x9f020000)

Signed-off-by: Thomas Roberts <tom.p.roberts@gmail.com>
12 files changed:
target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.4
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n-v2.c [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/image/tp-link.mk
target/linux/ar71xx/mikrotik/config-default

index 70f5dac..4dc4bfd 100755 (executable)
@@ -667,6 +667,9 @@ tl-wpa8630)
 tl-wr802n-v1)
        ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt"
        ;;
+tl-wr802n-v2)
+       ucidef_set_led_wlan "wlan" "WLAN" "$board:green:system" "phy0tpt"
+       ;;
 tl-wr940n-v4|\
 tl-wr941nd-v6)
        ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0"
index 3ae35f1..95faea0 100755 (executable)
@@ -116,6 +116,7 @@ ar71xx_setup_interfaces()
        tl-wa901nd-v4|\
        tl-wr703n|\
        tl-wr802n-v1|\
+       tl-wr802n-v2|\
        tube2h|\
        unifiac-lite|\
        wndap360|\
index ae6c693..1064641 100644 (file)
@@ -26,6 +26,7 @@ get_status_led() {
        minibox-v1|\
        som9331|\
        sr3200|\
+       tl-wr802n-v2|\
        xd3200)
                status_led="$board:green:system"
                ;;
index 2ae4e11..ae0189d 100755 (executable)
@@ -220,6 +220,10 @@ tplink_board_detect() {
                ;;
        "080200"*)
                model="TP-Link TL-WR802N"
+
+               if [ "$hwid" = '08020002' -a "$mid" = '00000002' ]; then
+                       hwver=' v2'
+               fi
                ;;
        "083000"*)
                model="TP-Link TL-WA830RE"
@@ -1031,6 +1035,9 @@ ar71xx_board_detect() {
        *"TL-WR802N v1")
                name="tl-wr802n-v1"
                ;;
+       *"TL-WR802N v2")
+               name="tl-wr802n-v2"
+               ;;
        *TL-WA901ND)
                name="tl-wa901nd"
                ;;
index c2585b4..0175f6d 100755 (executable)
@@ -430,6 +430,7 @@ platform_check_image() {
        tl-wr741nd-v4|\
        tl-wr741nd|\
        tl-wr802n-v1|\
+       tl-wr802n-v2|\
        tl-wr810n|\
        tl-wr841n-v11|\
        tl-wr841n-v1|\
index d45c3c4..0e2d786 100644 (file)
@@ -193,6 +193,7 @@ CONFIG_ATH79_MACH_TL_WR720N_V3=y
 CONFIG_ATH79_MACH_TL_WR741ND=y
 CONFIG_ATH79_MACH_TL_WR741ND_V4=y
 CONFIG_ATH79_MACH_TL_WR802N_V1=y
+CONFIG_ATH79_MACH_TL_WR802N_V2=y
 CONFIG_ATH79_MACH_TL_WR810N=y
 CONFIG_ATH79_MACH_TL_WR841N_V1=y
 CONFIG_ATH79_MACH_TL_WR841N_V8=y
index 44f754c..514d05d 100644 (file)
@@ -1533,6 +1533,14 @@ config ATH79_MACH_TL_WR802N_V1
        select ATH79_DEV_LEDS_GPIO
        select ATH79_DEV_M25P80
 
+config ATH79_MACH_TL_WR802N_V2
+       bool "TP-LINK TL-WR802N v2 support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+
 config ATH79_MACH_TL_WR810N
        bool "TP-LINK TL-WR810N support"
        select SOC_QCA953X
index f402463..6475259 100644 (file)
@@ -198,6 +198,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3)               += mach-tl-wr720n-v3.o
 obj-$(CONFIG_ATH79_MACH_TL_WR741ND)            += mach-tl-wr741nd.o
 obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4)         += mach-tl-wr741nd-v4.o
 obj-$(CONFIG_ATH79_MACH_TL_WR802N_V1)          += mach-tl-wr802n.o
+obj-$(CONFIG_ATH79_MACH_TL_WR802N_V2)          += mach-tl-wr802n-v2.o
 obj-$(CONFIG_ATH79_MACH_TL_WR810N)             += mach-tl-wr810n.o
 obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1)          += mach-tl-wr841n.o
 obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8)          += mach-tl-wr841n-v8.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n-v2.c
new file mode 100644 (file)
index 0000000..10e0c59
--- /dev/null
@@ -0,0 +1,97 @@
+/*
+ *  TP-LINK TL-WR802N v2
+ *
+ *  Copyright (C) 2016 Thomas Roberts <tom.p.roberts@gmail.com <mailto:tom.p.roberts@gmail.com>>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR802N_V2_GPIO_LED_SYSTEM   13
+#define TL_WR802N_V2_GPIO_BTN_RESET    11
+
+#define TL_WR802N_V2_KEYS_POLL_INTERVAL        20      /* msecs */
+#define TL_WR802N_V2_KEYS_DEBOUNCE_INTERVAL    (3 * TL_WR802N_V2_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr802n_v2_part_probes[] = {
+       "tp-link",
+       NULL,
+};
+
+static struct flash_platform_data tl_wr802n_v2_flash_data = {
+       .part_probes    = tl_wr802n_v2_part_probes,
+};
+
+static struct gpio_led tl_wr802n_v2_leds_gpio[] __initdata = {
+       {
+               .name           = "tl-wr802n-v2:green:system",
+               .gpio           = TL_WR802N_V2_GPIO_LED_SYSTEM,
+               .active_low     = 1,
+       },
+};
+
+static struct gpio_keys_button tl_wr802n_v2_gpio_keys[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = TL_WR802N_V2_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = TL_WR802N_V2_GPIO_BTN_RESET,
+               .active_low     = 0,
+       }
+};
+
+static void __init tl_ap143_setup(void)
+{
+               u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+               u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+               u8 tmpmac[ETH_ALEN];
+
+               ath79_register_m25p80(&tl_wr802n_v2_flash_data);
+
+               ath79_setup_ar933x_phy4_switch(false, false);
+
+               ath79_register_mdio(0, 0x0);
+
+               /* LAN */
+               ath79_switch_data.phy4_mii_en = 1;
+               ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+               ath79_eth0_data.duplex = DUPLEX_FULL;
+               ath79_eth0_data.speed = SPEED_100;
+               ath79_eth0_data.phy_mask = BIT(4);
+               ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+               ath79_register_eth(0);
+
+               ath79_init_mac(tmpmac, mac, 0);
+               ath79_register_wmac(ee, tmpmac);
+};
+
+static void __init tl_wr802n_v2_setup(void)
+{
+       tl_ap143_setup();
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr802n_v2_leds_gpio),
+               tl_wr802n_v2_leds_gpio);
+
+       ath79_register_gpio_keys_polled(1, TL_WR802N_V2_KEYS_POLL_INTERVAL,
+               ARRAY_SIZE(tl_wr802n_v2_gpio_keys),
+               tl_wr802n_v2_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR802N_V2, "TL-WR802N-v2", "TP-LINK TL-WR802N v2",
+               tl_wr802n_v2_setup);
\ No newline at end of file
index 39a80fc..4cad628 100644 (file)
@@ -237,6 +237,7 @@ enum ath79_mach_type {
        ATH79_MACH_TL_WR741ND,                  /* TP-LINK TL-WR741ND */
        ATH79_MACH_TL_WR741ND_V4,               /* TP-LINK TL-WR741ND v4 */
        ATH79_MACH_TL_WR802N_V1,                /* TP-LINK TL-WR802N v1 */
+       ATH79_MACH_TL_WR802N_V2,                /* TP-LINK TL-WR802N v2 */
        ATH79_MACH_TL_WR810N,                   /* TP-LINK TL-WR810N */
        ATH79_MACH_TL_WR841N_V1,                /* TP-LINK TL-WR841N v1 */
        ATH79_MACH_TL_WR841N_V11,               /* TP-LINK TL-WR841N/ND v11 */
index 34b5390..b251135 100644 (file)
@@ -631,12 +631,24 @@ TARGET_DEVICES += tl-wr740n-v1 tl-wr740n-v3 tl-wr740n-v4 tl-wr740n-v5 tl-wr740n-
 define Device/tl-wr802n-v1
     $(Device/tplink-4mlzma)
     DEVICE_TITLE := TP-LINK TL-WR802N v1
-       BOARDNAME := TL-WR802N-v1
+    BOARDNAME := TL-WR802N-v1
     DEVICE_PROFILE := TLWR802
     TPLINK_HWID := 0x08020001
     TPLINK_HWREV := 1
 endef
-TARGET_DEVICES += tl-wr802n-v1
+
+define Device/tl-wr802n-v2
+    $(Device/tplink-4mlzma)
+    DEVICE_TITLE := TP-LINK TL-WR802N v2
+    BOARDNAME := TL-WR802N-v2
+    DEVICE_PROFILE := TLWR802
+    TPLINK_HWID := 0x08020002
+    TPLINK_HWREV := 2
+    IMAGES += factory-us.bin factory-eu.bin
+    IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
+    IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
+endef
+TARGET_DEVICES += tl-wr802n-v1 tl-wr802n-v2
 
 define Device/tl-wr841-v1.5
     $(Device/tplink-4m)
index aa2cf3c..7339149 100644 (file)
@@ -158,6 +158,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
 # CONFIG_ATH79_MACH_TL_WR741ND is not set
 # CONFIG_ATH79_MACH_TL_WR741ND_V4 is not set
 # CONFIG_ATH79_MACH_TL_WR802N_V1 is not set
+# CONFIG_ATH79_MACH_TL_WR802N_V2 is not set
 # CONFIG_ATH79_MACH_TL_WR810N is not set
 # CONFIG_ATH79_MACH_TL_WR841N_V1 is not set
 # CONFIG_ATH79_MACH_TL_WR841N_V8 is not set