openwrt/staging/yousong.git
3 years agoar71xx: mark U-Boot and radio calibration data partitions as read-only
Piotr Dymacz [Wed, 24 Aug 2016 13:42:20 +0000 (15:42 +0200)]
ar71xx: mark U-Boot and radio calibration data partitions as read-only

General convention is to keep U-Boot and radio calibration
data (ART) mtd partitions marked as read-only.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
3 years agokirkwood: fix uimage creation for some kirkwood devices
bobafetthotmail [Sat, 3 Sep 2016 15:03:34 +0000 (17:03 +0200)]
kirkwood: fix uimage creation for some kirkwood devices

because with the current system I'm getting fake uImages that are actually a
renamed zImage, and that's plain wrong.
This fixes bug https://bugs.lede-project.org/index.php?do=details&task_id=131
and https://bugs.lede-project.org/index.php?do=details&task_id=139

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
3 years agobase-files: remind users to set root password
John Crispin [Sat, 17 Sep 2016 02:21:25 +0000 (04:21 +0200)]
base-files: remind users to set root password

print a warning when a shell spawns, telling users to set a root password.

Signed-off-by: John Crispin <john@phrozen.org>
3 years agocns3xxx: eliminate hardcoded kernel/rootfs partition split
Felix Fietkau [Thu, 15 Sep 2016 10:51:57 +0000 (12:51 +0200)]
cns3xxx: eliminate hardcoded kernel/rootfs partition split

This changes the sysupgrade format. To support upgrades from the old
firmware to the new one, legacy images are provided. Because of the old
partition split, these have to be specific to the NOR or SPI device.

The new sysupgrade images are suitable for begin put on flash directly,
and they are independent of NOR vs SPI flash variant.

Flashing back to old firmware is supported via using the old full-flash
images instead of the old sysupgrade images.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agocns3xxx: move laguna.c changes out of patches, update it in files/
Felix Fietkau [Thu, 15 Sep 2016 09:45:31 +0000 (11:45 +0200)]
cns3xxx: move laguna.c changes out of patches, update it in files/

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoubifs: add full overlayfs support
Felix Fietkau [Wed, 14 Sep 2016 08:15:40 +0000 (10:15 +0200)]
ubifs: add full overlayfs support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobcm53xx: use upstream accepted ILP clk driver for BCM53573
Rafał Miłecki [Sat, 17 Sep 2016 19:42:57 +0000 (21:42 +0200)]
bcm53xx: use upstream accepted ILP clk driver for BCM53573

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agokernel: add nlmon kernel module
Hauke Mehrtens [Mon, 12 Sep 2016 20:45:47 +0000 (22:45 +0200)]
kernel: add nlmon kernel module

This driver allows to monitor netlink communication on the system.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agobusybox: libnetlink: fix alignment of netlink messages
Hauke Mehrtens [Fri, 16 Sep 2016 20:44:41 +0000 (22:44 +0200)]
busybox: libnetlink: fix alignment of netlink messages

A padding to align a message should not only be added between
different attributes of a netlink message, but also at the end of the
message to pad it to the correct size.

Without this patch the following command does not work and returns an
error code:
ip link add type nlmon

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agobase-files: reduce vm.min_free_kbytes for devices with 32M RAM
Felix Fietkau [Fri, 16 Sep 2016 14:44:28 +0000 (16:44 +0200)]
base-files: reduce vm.min_free_kbytes for devices with 32M RAM

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agolinux-firmware: update to the commit from 2016-09-15
Rafał Miłecki [Fri, 16 Sep 2016 10:30:04 +0000 (12:30 +0200)]
linux-firmware: update to the commit from 2016-09-15

This adds e.g. BCM43430 firmware (not packaged yet).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agoarm64: fix build for linux 4.4.21
Álvaro Fernández Rojas [Fri, 16 Sep 2016 10:11:10 +0000 (12:11 +0200)]
arm64: fix build for linux 4.4.21

linux 4.4.21 adds 2 new symbols for arm64.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agokernel: update kernel 4.4 to version 4.4.21
Álvaro Fernández Rojas [Fri, 16 Sep 2016 08:17:27 +0000 (10:17 +0200)]
kernel: update kernel 4.4 to version 4.4.21

Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agosunxi: add rtl8xxxu into pcduino v3 profile
Álvaro Fernández Rojas [Thu, 15 Sep 2016 18:21:40 +0000 (20:21 +0200)]
sunxi: add rtl8xxxu into pcduino v3 profile

Now that RTL8188EU is supported in rtl8xxu select it for pcDuino v3

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agortl8xxxu: add support for rtl8188eu
Álvaro Fernández Rojas [Wed, 29 Jun 2016 15:04:05 +0000 (17:04 +0200)]
rtl8xxxu: add support for rtl8188eu

Patches by Jes Sorensen:
https://git.kernel.org/cgit/linux/kernel/git/jes/linux.git/

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agolinux-firmware: rename r8188eu-firmware to rtl8188eu-firmware
Álvaro Fernández Rojas [Wed, 27 Jul 2016 10:24:04 +0000 (12:24 +0200)]
linux-firmware: rename r8188eu-firmware to rtl8188eu-firmware

This is consistent with the names used for other realtek firmwares.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agomac80211: stop brcmfmac from selecting all SDIO firmwares
Álvaro Fernández Rojas [Thu, 15 Sep 2016 07:09:46 +0000 (09:09 +0200)]
mac80211: stop brcmfmac from selecting all SDIO firmwares

Now that we have firmwares separated and brcm2708 being the only target that
actually selects SDIO support, avoid selecting all firmwares by default.
sunxi should select the proper firmwares once SDIO support is enabled and
tested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agobrcmfmac43430-firmware: rename to brcmfmac-firmware-43430-sdio
Álvaro Fernández Rojas [Thu, 15 Sep 2016 07:07:50 +0000 (09:07 +0200)]
brcmfmac43430-firmware: rename to brcmfmac-firmware-43430-sdio

This is consistent with the rest of brcmfmac firmwares.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agolinux-firmware: separate packages for Broadcom FullMAC SDIO firmwares
Álvaro Fernández Rojas [Thu, 15 Sep 2016 07:00:35 +0000 (09:00 +0200)]
linux-firmware: separate packages for Broadcom FullMAC SDIO firmwares

Using few packages will allow saving some space by decreasing rootfs
size.

Moreover there are more firmware files that may require packaging and
even more to come later.

This can especially useful now, with per device rootfs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agoar71xx: set region code of TP-Link TL-WDR3600/4300 to US
Matthias Schiffer [Thu, 15 Sep 2016 17:24:58 +0000 (19:24 +0200)]
ar71xx: set region code of TP-Link TL-WDR3600/4300 to US

There are currently two stock firmwares for the TL-WDR3600/4300, a US and
a universal version. Both allow installing images with US region code, so
we don't need to provide multiple images.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
3 years agoar71xx: separate TP-Link TL-WDR3600/4300/4310 profiles
Matthias Schiffer [Thu, 15 Sep 2016 17:17:43 +0000 (19:17 +0200)]
ar71xx: separate TP-Link TL-WDR3600/4300/4310 profiles

Simplify modifying some of the images without affecting the others.

While we're at it, also unify the profiles to use := syntax and add "v1" to
the TL-WDR4300 name to make things more consistent.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
3 years agokernel: fix missing rename on usb gadget kmod cleanup
Felix Fietkau [Thu, 15 Sep 2016 15:01:40 +0000 (17:01 +0200)]
kernel: fix missing rename on usb gadget kmod cleanup

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agocns3xxx: Enable driver support for onboard m25p80 SPI flash
Koen Vandeputte [Wed, 14 Sep 2016 14:46:00 +0000 (16:46 +0200)]
cns3xxx: Enable driver support for onboard m25p80 SPI flash

This device is present on the Gateworks Laguna cns3xxx family.

As the SPI bus master is enabled, also enable driver support for
this typical slave.

[    3.920000] m25p80 spi1.0: found m25p32, expected m25p80
[    3.930000] m25p80 spi1.0: m25p32 (4096 Kbytes)
[    3.930000] Creating 4 MTD partitions on "spi1.0":
[    3.940000] 0x000000000000-0x000000040000 : "uboot"
[    3.940000] 0x000000040000-0x000000080000 : "params"
[    3.950000] 0x000000080000-0x000000200000 : "kernel"
[    3.950000] 0x000000200000-0x000000400000 : "rootfs"

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 years agokernel: clean up usb gadget support
Tim Harvey [Thu, 8 Sep 2016 15:40:03 +0000 (08:40 -0700)]
kernel: clean up usb gadget support

clean up usb gadget support:
- rename gadget modules so that they appear together and are easier to
  identify as gadget modules
- make usb-lib-composite and usb-gadget hidden as there is no point in
  selecting those without gadget drivers that require them as deps

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
3 years agoramips: fix wrong blocksizes
Mathias Kresin [Wed, 14 Sep 2016 17:11:19 +0000 (19:11 +0200)]
ramips: fix wrong blocksizes

The D-Link DIR-860L B1 has a flash chip which doesn't support
4K sectors. Since the DIR-860L B1 was the only mt7621 board which had
the 4k blocksize set, the 4K sector support is removed from the kernel
config.

I've checked the flash chips of all boards having set a 4K blocksize
again. This time I searched harder to finding bootlogs instead of
relying on wikis articles and/or the device tree source file.

The Planex MZK-DP150N has an en25q32b instead of the mentioned one in
the dts. Albeit the en25q32b supports 4K sectors, 4K support is not
enabled in the driver. Change the blocksize for this board back to 64K.

Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agokernel: update kernel 4.4 to version 4.4.20
Álvaro Fernández Rojas [Thu, 15 Sep 2016 06:10:55 +0000 (08:10 +0200)]
kernel: update kernel 4.4 to version 4.4.20

Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agomac80211: stop brcmfmac from selecting all PCIe firmwares
Rafał Miłecki [Tue, 13 Sep 2016 09:28:07 +0000 (11:28 +0200)]
mac80211: stop brcmfmac from selecting all PCIe firmwares

Now we have firmwares separated and bcm53xx selecting required ones make
use of it to actually save that rootfs space.
Other targets using brcmfmac (brcm2708 and sunxi) use SDIO interface and
firmware so they don't won't be affected.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agomountd: update to latest git HEAD
John Crispin [Wed, 14 Sep 2016 19:37:21 +0000 (21:37 +0200)]
mountd: update to latest git HEAD

fixes cleanup of mount points

Signed-off-by: John Crispin <john@phrozen.org>
3 years agoramips: enable 4K sector support in kernel config
Mathias Kresin [Tue, 13 Sep 2016 19:47:25 +0000 (21:47 +0200)]
ramips: enable 4K sector support in kernel config

This is a follow up to 28110727f1d513a6c4c13aa87ecb606aa5d306eb
"ramips: set blocksize for 4MB devices". I've missed to include the
required changes of the kernel configs to enable 4K sector size
support.

The option is only enabled for targets having boards with 4k sector
size flash chips.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoimage: remove padding parameter from append-kernel/append-rootfs
Mathias Kresin [Sun, 11 Sep 2016 17:05:20 +0000 (19:05 +0200)]
image: remove padding parameter from append-kernel/append-rootfs

Using pad-to instead of passing the optional padding to append-kernel
or append-rootfs. It could be that the value of a variable is passed.
In case the variable is empty no error is thrown.

Furthermore the purpose of the extra parameter is hard to get without
reading the code.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoimage: use check-size from new image build code
Mathias Kresin [Tue, 13 Sep 2016 05:18:10 +0000 (07:18 +0200)]
image: use check-size from new image build code

Use the new image build code and deduplicate the code.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoimage: add KERNEL_SIZE to the default device vars
Mathias Kresin [Tue, 13 Sep 2016 17:23:52 +0000 (19:23 +0200)]
image: add KERNEL_SIZE to the default device vars

This reverts commit ec37a565878fd79d4127cbb843c17ce3b8dc97c0 and fixes
the underlying issue.

3 years agobcm53xx: use the latest submitted version of ILP clock driver
Rafał Miłecki [Tue, 13 Sep 2016 10:24:36 +0000 (12:24 +0200)]
bcm53xx: use the latest submitted version of ILP clock driver

It switched to syscon to better describe PMU block.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agohostapd: fix regression breaking brcmfmac
Rafał Miłecki [Tue, 13 Sep 2016 10:05:33 +0000 (12:05 +0200)]
hostapd: fix regression breaking brcmfmac

The latest update of hostapd broke brcmfmac due to upstream regression.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agobcm53xx: specify brcmfmac firmware for every device
Rafał Miłecki [Tue, 13 Sep 2016 09:03:02 +0000 (11:03 +0200)]
bcm53xx: specify brcmfmac firmware for every device

This will allow us to include required firmwares only and save some
rootfs space.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agolinux-firmware: separate packages for Broadcom FullMAC PCIe firmwares
Rafał Miłecki [Sun, 11 Sep 2016 20:56:45 +0000 (22:56 +0200)]
linux-firmware: separate packages for Broadcom FullMAC PCIe firmwares

Using few packages will allow saving some space by decreasing rootfs
size. Dropping 43602a1 firmware saves 316 580 B. Dropping 4366b1 saves
468 188 B.

Moreover there are more firmware files that may require packaging and
even more to come later (e.g. 4366c0).

This can especially useful now, with per device rootfs.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agokernel: Backport pending appended DTB handling patches
Daniel Gimpelevich [Sun, 17 Jul 2016 15:30:42 +0000 (08:30 -0700)]
kernel: Backport pending appended DTB handling patches

Backport patches from upstream Linux kernel which are making the
kernel stores the appended dtb not in the same resisters as defined in
the UHI specification, use a separate variable on MIPS.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
[some modifications]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agobuild: drop UBI EOF marker from images by default
Felix Fietkau [Mon, 12 Sep 2016 16:20:50 +0000 (18:20 +0200)]
build: drop UBI EOF marker from images by default

Only add them where they are actually required.
Should help with compatibility issues with stock U-Boot images that
access UBI

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agomac80211: fix tx issue with CCMP PN generated in hardware
Felix Fietkau [Mon, 12 Sep 2016 09:25:20 +0000 (11:25 +0200)]
mac80211: fix tx issue with CCMP PN generated in hardware

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoramips: improve Linksys EA8500 build code
Mathias Kresin [Sun, 11 Sep 2016 15:46:09 +0000 (17:46 +0200)]
ramips: improve Linksys EA8500 build code

Use of the kernel size variable.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agomvebu: fix OpenBlocks AX3 image
Mathias Kresin [Sun, 11 Sep 2016 17:06:32 +0000 (19:06 +0200)]
mvebu: fix OpenBlocks AX3 image

The KERNEL_SIZE variable is unset and no padding is applied. This looks
like a typo to me since the ubinized image need to be aligned to the
flash blocksize.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoar71xx: fix typo in image build code
Mathias Kresin [Sun, 11 Sep 2016 15:50:29 +0000 (17:50 +0200)]
ar71xx: fix typo in image build code

The kernel size isn't passed to the append-kernel build step and the
resulting image bricks the device.

Fixes FS#168.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agocleanup ucidef_set_interface* usage
Mathias Kresin [Sat, 10 Sep 2016 07:46:14 +0000 (09:46 +0200)]
cleanup ucidef_set_interface* usage

- quote the interface name
- remove call of not existing function
- remove the proto if it's the default proto

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agouse immediate set in target Makefiles
Mathias Kresin [Fri, 9 Sep 2016 19:10:54 +0000 (21:10 +0200)]
use immediate set in target Makefiles

No functional change, it's just to have the same style everywhere. This
way I don't need to use any regex magic to extract all subtargets for
compile tests.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: board.d merge redundant switch/interface configs
Mathias Kresin [Fri, 9 Sep 2016 18:57:58 +0000 (20:57 +0200)]
ramips: board.d merge redundant switch/interface configs

Fix alphabetical order distortions as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agolantiq: board.d: apply alphabetical order
Mathias Kresin [Thu, 25 Aug 2016 20:19:00 +0000 (22:19 +0200)]
lantiq: board.d: apply alphabetical order

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agolantiq: board.d: cleanup default switch config
Mathias Kresin [Tue, 23 Aug 2016 05:36:00 +0000 (07:36 +0200)]
lantiq: board.d: cleanup default switch config

Add or fix the physical port number of switch ports to allow LuCI to
display the ports in physical order.

Remove the physical port number in case bridge port and physical port
order are the same.

Reorder the ucidef_add_switch parameter to be aligned with the switch
port number.

Remove board settings which are covered by the default case and remove
comments.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agolantiq: enable cpu temp driver for more tested boards
Mathias Kresin [Thu, 18 Aug 2016 19:14:41 +0000 (21:14 +0200)]
lantiq: enable cpu temp driver for more tested boards

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agobrcm2708: update linux 4.4 patches to latest version
Álvaro Fernández Rojas [Sat, 10 Sep 2016 12:54:26 +0000 (14:54 +0200)]
brcm2708: update linux 4.4 patches to latest version

As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Also adds support for Raspberry Pi Compute Module 3 (untested).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agobrcm2708-gpu-fw: update to latest version
Álvaro Fernández Rojas [Sat, 10 Sep 2016 12:54:08 +0000 (14:54 +0200)]
brcm2708-gpu-fw: update to latest version

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agodnsmasq: make NO_ID optional in full variant
Kevin Darbyshire-Bryant [Fri, 9 Sep 2016 08:03:27 +0000 (09:03 +0100)]
dnsmasq: make NO_ID optional in full variant

Permit users of the full variant to disable the NO_ID *.bind pseudo
domain masking.

Defaulted 'on' in all variants.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
3 years agodropbear: hide dropbear version
Kevin Darbyshire-Bryant [Wed, 7 Sep 2016 16:23:51 +0000 (17:23 +0100)]
dropbear: hide dropbear version

As security precaution and to limit the attack surface based on
the version reported by tools like nmap mask out the dropbear
version so the version is not visible anymore by snooping on the
wire. Version is still visible by 'dropbear -V'

Based on a patch by Hans Dedecker <dedeckeh@gmail.com>

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove trailing _]
3 years agox86: disable MTD support
Felix Fietkau [Thu, 8 Sep 2016 12:48:43 +0000 (14:48 +0200)]
x86: disable MTD support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoocteon: remove block2mtd support
Felix Fietkau [Thu, 8 Sep 2016 13:16:12 +0000 (15:16 +0200)]
octeon: remove block2mtd support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoocteon: use new ext4/f2fs overlay support
Felix Fietkau [Thu, 8 Sep 2016 12:46:49 +0000 (14:46 +0200)]
octeon: use new ext4/f2fs overlay support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoocteon: enable f2fs and loopback device support in the config
Felix Fietkau [Thu, 8 Sep 2016 12:46:37 +0000 (14:46 +0200)]
octeon: enable f2fs and loopback device support in the config

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoocteon: enable f2fs and ext4 utilities
Felix Fietkau [Thu, 8 Sep 2016 12:46:25 +0000 (14:46 +0200)]
octeon: enable f2fs and ext4 utilities

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agomvebu: use ext4/f2fs overlay filesystem for solidrun clearfog
Felix Fietkau [Thu, 8 Sep 2016 12:19:34 +0000 (14:19 +0200)]
mvebu: use ext4/f2fs overlay filesystem for solidrun clearfog

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agomvebu: enable ext4, f2fs and loop device support
Felix Fietkau [Thu, 8 Sep 2016 11:59:32 +0000 (13:59 +0200)]
mvebu: enable ext4, f2fs and loop device support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agox86: drop the use of block2mtd, use ext4/f2fs as overlay filesystem
Felix Fietkau [Thu, 8 Sep 2016 11:40:12 +0000 (13:40 +0200)]
x86: drop the use of block2mtd, use ext4/f2fs as overlay filesystem

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agox86: enable mkf2fs and e2fsprogs by default
Felix Fietkau [Thu, 8 Sep 2016 11:39:14 +0000 (13:39 +0200)]
x86: enable mkf2fs and e2fsprogs by default

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agox86: enable f2fs and loopback device support in the kernel config
Felix Fietkau [Tue, 6 Sep 2016 11:46:44 +0000 (13:46 +0200)]
x86: enable f2fs and loopback device support in the kernel config

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agofstools: update to the latest version, adds support for ext4/f2fs overlay via loopbac...
Felix Fietkau [Thu, 8 Sep 2016 11:41:44 +0000 (13:41 +0200)]
fstools: update to the latest version, adds support for ext4/f2fs overlay via loopback device

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoimx6: Add static PCA953x support in kernel
Koen Vandeputte [Fri, 9 Sep 2016 07:44:55 +0000 (09:44 +0200)]
imx6: Add static PCA953x support in kernel

commit a2386c384da501e862210f222994821580fe151c requires the
module to be static in the kernel.

So lets actually add support for it inside the kernel config.
Tested on Ventana

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 years agoramips: set blocksize for remaining rt3883 devices
Mathias Kresin [Thu, 8 Sep 2016 19:03:57 +0000 (21:03 +0200)]
ramips: set blocksize for remaining rt3883 devices

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: remove old build code seama recipe
Mathias Kresin [Sat, 3 Sep 2016 13:27:46 +0000 (15:27 +0200)]
ramips: remove old build code seama recipe

Now that all seama images are using the new build code this seama recipe
used with the old build code can be dropped.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: switch DIR-610 A1 to new image build code
Mathias Kresin [Thu, 8 Sep 2016 20:21:23 +0000 (22:21 +0200)]
ramips: switch DIR-610 A1 to new image build code

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: switch some rt3883 devices to new build code
Mathias Kresin [Sat, 3 Sep 2016 08:18:31 +0000 (10:18 +0200)]
ramips: switch some rt3883 devices to new build code

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: move seama build recipe to Makefile
Mathias Kresin [Sat, 3 Sep 2016 07:43:31 +0000 (09:43 +0200)]
ramips: move seama build recipe to Makefile

The identical build step is defined twice. Move it to the parent
Makefile to use only one version.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: switch DIR-615 H1 to new image build code
Mathias Kresin [Fri, 2 Sep 2016 05:34:36 +0000 (07:34 +0200)]
ramips: switch DIR-615 H1 to new image build code

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: add build recipe for senao header
Mathias Kresin [Wed, 17 Aug 2016 05:49:34 +0000 (07:49 +0200)]
ramips: add build recipe for senao header

Add it to the Makefile to allow a board which will be supported soon
to use the recipe as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: set blocksize for 4MB devices
Mathias Kresin [Sat, 3 Sep 2016 07:56:35 +0000 (09:56 +0200)]
ramips: set blocksize for 4MB devices

Set the blocksize for devices having only 4MB of flash for ramips
devices already using the new image build code.

Informations about the used flash chip are gathered from the OpenWrt
wiki, wikidevi, forums, OEM bootlogs or the compatible property in the
device tree source file.

The en25q32b from the AirLive Air3GII does not have 4k support in the
kernel.

For the following boards no information about the used flash chip could
be found and a 64k blocksize is assumed:

  - Ralink V11ST-FE
  - Ralink AP-RT3052-V22RW-2X2
  - MediaTek MT7628 EVB
  - MediaTek MT7621 EVB
  - UPVEL UR-326N4G
  - Buffalo WZR-AGL300NH

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: don't set the same max image size twice
Mathias Kresin [Sun, 4 Sep 2016 08:04:20 +0000 (10:04 +0200)]
ramips: don't set the same max image size twice

The ralink_default_fw_size_8M is already set for the default device.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoimage: specify max image size in Kilobyte/Megabyte
Mathias Kresin [Sun, 4 Sep 2016 07:58:02 +0000 (09:58 +0200)]
image: specify max image size in Kilobyte/Megabyte

Use the k and m unit suffix to be consistent with the blocksize.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoimage: use k as unit suffix for blocksize
Mathias Kresin [Sun, 4 Sep 2016 06:56:05 +0000 (08:56 +0200)]
image: use k as unit suffix for blocksize

Use k as unit suffix for kilobyte to have a the same unit regardless of
the used filesystem.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoimage: pass device blocksize to padjffs2
Mathias Kresin [Sat, 3 Sep 2016 05:40:15 +0000 (07:40 +0200)]
image: pass device blocksize to padjffs2

At the moment the padding steps are hardcoded. Especially images for
devices with a 4K sector size can be unnecessarily bloated using the
hardcoded padding steps.

It has been observed that 192Kb of padding was added to the image of a
4MB device, albeit due to the 4K sector size the minimum required extra
padding for the jffs2 rootfs_data is 20Kb.

In worst case it means that the image-size check could fail albeit
there is enough space for all selected packages

For device build code not exposing the blocksize, use the hardcoded
padding further on.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agokernel: mtd: backport Macronix sector size fix
Mathias Kresin [Sat, 3 Sep 2016 07:27:09 +0000 (09:27 +0200)]
kernel: mtd: backport Macronix sector size fix

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoapm821xx: image: add support for k unit suffix to boot-img
Mathias Kresin [Thu, 8 Sep 2016 18:14:42 +0000 (20:14 +0200)]
apm821xx: image: add support for k unit suffix to boot-img

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoimage: add support for k unit suffix to append-ubi
Mathias Kresin [Sun, 4 Sep 2016 06:51:58 +0000 (08:51 +0200)]
image: add support for k unit suffix to append-ubi

Allows to use the same unit for all definitions of the blocksize to be
consistent regardless of the used filesystem.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoimage: add support for k unit suffix to pad-offset
Mathias Kresin [Sat, 3 Sep 2016 05:36:12 +0000 (07:36 +0200)]
image: add support for k unit suffix to pad-offset

Allows to specificy the padding and offset in kilobytes to be
consistent with pad-to.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: use lower case names for TEW-69xGR images
Mathias Kresin [Fri, 9 Sep 2016 05:12:37 +0000 (07:12 +0200)]
ramips: use lower case names for TEW-69xGR images

Use lower case variant of the device name for to images to be
consistent with all other images names.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: fix wrong TARGET_DEVICES
Mathias Kresin [Thu, 8 Sep 2016 21:51:46 +0000 (23:51 +0200)]
ramips: fix wrong TARGET_DEVICES

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: fix wrong device title
Mathias Kresin [Thu, 8 Sep 2016 05:32:00 +0000 (07:32 +0200)]
ramips: fix wrong device title

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agofirmware-utils: mksenaofw: rework option validation
Mathias Kresin [Wed, 17 Aug 2016 18:08:52 +0000 (20:08 +0200)]
firmware-utils: mksenaofw: rework option validation

The options firmware_type, vendor_id and product_id are not required
for decoding an image file.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agoramips: add support for Mercury MAC1200R v2
Daniel Golle [Thu, 8 Sep 2016 22:57:31 +0000 (00:57 +0200)]
ramips: add support for Mercury MAC1200R v2

MT7628AN + MT7612E, 8MB SPI flash, 64MB DDR RAM
reset button GPIO is still missing (anyone?)
bootloader password is 'slp'

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agooxnas: small image improvements for kd20
Daniel Golle [Sun, 4 Sep 2016 17:12:12 +0000 (19:12 +0200)]
oxnas: small image improvements for kd20

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agobcm53xx: enable switch port 5 on Tenda AC9
Rafał Miłecki [Thu, 8 Sep 2016 21:23:41 +0000 (23:23 +0200)]
bcm53xx: enable switch port 5 on Tenda AC9

Now b53 forces port 5 link when needed, we can enable it on Tenda AC9
and start using eth1.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agokernel: b53: force BCM531x5 port 5 link state if enabled
Rafał Miłecki [Thu, 18 Aug 2016 09:05:12 +0000 (11:05 +0200)]
kernel: b53: force BCM531x5 port 5 link state if enabled

Some devices (e.g. Tenda AC9 based on BCM47189B0) have BCM53125 with
port 5 connected to the second Ethernet interface on the SoC. In such
case there is no PHY and we need to force link manually.

This assumes port 5 can be marked as enabled for such devices. It's not
implemented yet unfortunately.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agobcm53xx: use upstream queued patches for R8500 and AC9
Rafał Miłecki [Thu, 8 Sep 2016 20:53:00 +0000 (22:53 +0200)]
bcm53xx: use upstream queued patches for R8500 and AC9

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agokernel: move bcma BCM53573 patch to bcma 4.9 backports
Rafał Miłecki [Thu, 8 Sep 2016 20:39:17 +0000 (22:39 +0200)]
kernel: move bcma BCM53573 patch to bcma 4.9 backports

This patch has been accepted for 4.9.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agoimx6: override default inittab to add video console tty
Tim Harvey [Tue, 6 Sep 2016 16:44:32 +0000 (09:44 -0700)]
imx6: override default inittab to add video console tty

Adds the following to the default inittab
tty1::askfirst:/bin/ash --login

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
3 years agoimx6: image: remove pca955x/ds1672/at24 from Ventana kernel modules
Tim Harvey [Tue, 6 Sep 2016 16:40:25 +0000 (09:40 -0700)]
imx6: image: remove pca955x/ds1672/at24 from Ventana kernel modules

These need to be static in the kernel for Ventana

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
3 years agoimages: bump default rootfs size to 256 MB
Felix Fietkau [Tue, 6 Sep 2016 15:19:30 +0000 (17:19 +0200)]
images: bump default rootfs size to 256 MB

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agof2fs-tools: import from packages, clean up, and update to latest
Felix Fietkau [Tue, 6 Sep 2016 11:12:17 +0000 (13:12 +0200)]
f2fs-tools: import from packages, clean up, and update to latest

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agodnsmasq: Don't expose *.bind data incl version
Kevin Darbyshire-Bryant [Wed, 7 Sep 2016 10:13:52 +0000 (11:13 +0100)]
dnsmasq: Don't expose *.bind data incl version

Don't expose dnsmasq version & other data to clients via the *.bind
pseudo domain.  This uses a new 'NO_ID' compile time option which has been
discussed and submitted upstream.

This is an alternate to replacing version with 'unknown' which affects
the version reported to syslog and 'dnsmasq --version'

Run time tested with & without NO_ID on Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
3 years agomac80211: remove the fq-disable hack, now that reordering is fixed
Felix Fietkau [Mon, 5 Sep 2016 17:19:48 +0000 (19:19 +0200)]
mac80211: remove the fq-disable hack, now that reordering is fixed

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agomac80211: fix packet loss on fq reordering
Felix Fietkau [Mon, 5 Sep 2016 17:12:05 +0000 (19:12 +0200)]
mac80211: fix packet loss on fq reordering

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agohostapd: update to version 2016-09-05
Felix Fietkau [Tue, 6 Sep 2016 08:53:17 +0000 (10:53 +0200)]
hostapd: update to version 2016-09-05

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agokernel: merge a softirq performance improvement patch
Felix Fietkau [Thu, 1 Sep 2016 10:18:03 +0000 (12:18 +0200)]
kernel: merge a softirq performance improvement patch

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoe2fsprogs: List all libraries explicitly
Florian Fainelli [Wed, 7 Sep 2016 17:25:34 +0000 (10:25 -0700)]
e2fsprogs: List all libraries explicitly

e2fsprogs would fail linking with external toolchains which would not be able
to find several dependencies, explicit them.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>