treewide: fix replace nbd@openwrt.org with nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name> SVN-Revision: 49379
bcm53xx: drop Copyright header from two of my bash scripts Both scripts modified by this patch were added by me. First of all I incorrectly added OpenWrt as Copyright holder. It was wrong because: 1) I simply can't transfer my moral rights according to the Polish law 2) Transfering copyrights (economic rights) requires an agreement which I didn't sign with OpenWrt(.org). Other than that I don't find these trivial scripts important enough to put info about *my* copyrights in a header so this patch just drops them completely. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49377
krikwood: Make Iconnect image use new ubi format style To flash first time follow instructions in commit: "kirkwood/dockstar: use ubi(kernel, squashfs, ubifs) images" Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> SVN-Revision: 49370
target: socfpga: Add Altera SoCFPGA support This patch adds support for the Altera SoCFPGA target. Both generic target and Terasic SoCkit boards are supported. Signed-off-by: Marek Vasut <marex@denx.de> SVN-Revision: 49367
ramips: Change all '/include/' clauses to '#include' so preprocessing can be done properly for the entire device trees. Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> SVN-Revision: 49357
ramips: Add hex prefix (0x) to dtsi reg properties where needed. Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> SVN-Revision: 49356
ramips: introduce serial0 aliases This patch introduces serial0 aliases in the ramips DTS files, which can then be used to denote the active console instead of relying on bootargs. Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> SVN-Revision: 49355
ramips: Don't use a VLAN for the single ethernet port of the A5-V11. This router only has one ethernet port, so a VLAN is useless here, now that the rt3050 TCP bug that happened without VLANs has been fixed for a very long time. Add this router to the VLAN-less config that is used by other single-port routers. Also fix MAC address detection code since this router has no WAN port. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 49350
ramips: Fix network for routers without VLANs on eth0. Some routers only have one port, so eth0 is used without VLANs for them. Revision r47720 introduced some changes, but wrongly confused "enable" with "reset". VLANs need to be disabled for those routers, and the switch may be reset. Fix this, by explicitly disabling VLANs instead of resetting the switch for these routers. Also merge duplicate configuration for the "m2m". Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 49349
kernel: add workaround to rebuild vdso-o32.so.dbg Building for octeon fails with 'arch/mips/vdso/vdso-o32.so.dbg' already contains a '.MIPS.abiflags' section if the file already exists from a prior build. Use the same workaround as the one for vdso.so.dbg committed in 9eb155353a5f5137ec85a5b5b0287af63c544710. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 49345
kernel: add a workaround to rebuild vdso.so.dbg after genvdso Currently the build fails with 'arch/mips/vdso/vdso.so.dbg' already contains a '.MIPS.abiflags' section if the file already exists from a prior build. Add a makefile rule to force the rebuild of vdso.so.dbg if genvdso has has been changed to workaround the failure. Signed-off-by: Jo-Philipp Wich <jo@mein.io> SVN-Revision: 49334
lantiq: fix xway image building Commit 8c130dd (lantiq: use new image build process for some images) broke image generation for the xway target since the generated macros reference not existing WBMRA.dts and WBMRB.dts files leading to the following build error: mips-openwrt-linux-musl-cpp: error: ../dts/WBMRA.dts: No such file or directory mips-openwrt-linux-musl-cpp: warning: '-x assembler-with-cpp' after last input file has no effect mips-openwrt-linux-musl-cpp: fatal error: no input files Previously both the WBMRA and WBMRB profiles shared a common WBMR DT since the only difference is the embedded firmware kmod package. Extend the lantiqImage macro to optionally support specifying a different DTS file and use this facility to let the both WBMR profiles reference the correct device tree file. Signed-off-by: Jo-Philipp Wich <jo@mein.io> SVN-Revision: 49330
x86: remove old references to kmod-acpi-button The kmod-acpi-button functionality is included in the kernel where needed and the corresponding kmod package has been deleted long ago, therfor drop the remaining references now. Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 49329