Config.in

   1 # Copyright (C) 2006-2010 OpenWrt.org
   2 #
   3 # This is free software, licensed under the GNU General Public License v2.
   4 # See /LICENSE for more information.
   5 #
   6
   7 mainmenu "OpenWrt Configuration"
   8
   9 config HAVE_DOT_CONFIG
  10         bool
  11         default y
  12
  13 source "target/Config.in"
  14
  15 menu "Target Images"
  16
  17         menuconfig TARGET_ROOTFS_INITRAMFS
  18                 bool "ramdisk"
  19                 default y if USES_INITRAMFS
  20                 help
  21                   Embed the rootfs into the kernel (initramfs)
  22
  23                 choice
  24                         prompt "Compression"
  25                         default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
  26                         default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
  27                         default TARGET_INITRAMFS_COMPRESSION_NONE
  28                         depends TARGET_ROOTFS_INITRAMFS
  29                         help
  30                           Select ramdisk compression.
  31
  32                         config TARGET_INITRAMFS_COMPRESSION_NONE
  33                                 bool "none"
  34
  35                         config TARGET_INITRAMFS_COMPRESSION_GZIP
  36                                 bool "gzip"
  37
  38                         config TARGET_INITRAMFS_COMPRESSION_BZIP2
  39                                 bool "bzip2"
  40
  41                         config TARGET_INITRAMFS_COMPRESSION_LZMA
  42                                 bool "lzma"
  43
  44                         config TARGET_INITRAMFS_COMPRESSION_LZO
  45                                 bool "lzo"
  46
  47                         config TARGET_INITRAMFS_COMPRESSION_XZ
  48                                 bool "xz"
  49                 endchoice
  50
  51                 config EXTERNAL_CPIO
  52                         string
  53                         prompt "Use external cpio" if TARGET_ROOTFS_INITRAMFS
  54                         default ""
  55                         help
  56                           Kernel uses specified external cpio as INITRAMFS_SOURCE
  57
  58         comment "Root filesystem archives"
  59
  60         config TARGET_ROOTFS_CPIOGZ
  61                 bool "cpio.gz"
  62                 default y if USES_CPIOGZ
  63                 help
  64                   Build a compressed cpio archive of the the root filesystem
  65
  66         config TARGET_ROOTFS_TARGZ
  67                 bool "tar.gz"
  68                 default y if USES_TARGZ
  69                 help
  70                   Build a compressed tar archive of the the root filesystem
  71
  72         comment "Root filesystem images"
  73
  74         config TARGET_ROOTFS_EXT4FS
  75                 bool "ext4"
  76                 default y if USES_EXT4
  77                 depends !TARGET_ROOTFS_INITRAMFS
  78                 help
  79                   Ext4 file system with some free space for uml images
  80
  81         config TARGET_ROOTFS_ISO
  82                 bool "iso"
  83                 default n
  84                 depends TARGET_ROOTFS_INITRAMFS && TARGET_x86
  85                 help
  86                   Create some bootable ISO image
  87
  88         config TARGET_ROOTFS_JFFS2
  89                 bool "jffs2"
  90                 default y if USES_JFFS2
  91                 depends !TARGET_ROOTFS_INITRAMFS
  92                 help
  93                   Build a jffs2 root filesystem
  94
  95         config TARGET_ROOTFS_SQUASHFS
  96                 bool "squashfs"
  97                 default y if USES_SQUASHFS
  98                 depends !TARGET_ROOTFS_INITRAMFS
  99                 help
 100                   Build a squashfs-lzma root filesystem
 101
 102         config TARGET_ROOTFS_UBIFS
 103                 bool "ubifs"
 104                 default y if USES_UBIFS
 105                 depends !TARGET_ROOTFS_INITRAMFS && USES_UBIFS
 106                 help
 107                   Build a ubifs root filesystem
 108
 109         comment "Image Options"
 110
 111         source "target/linux/*/image/Config.in"
 112
 113         config TARGET_ROOTFS_PARTSIZE
 114                 int "Root filesystem partition size (in MB)"
 115                 depends X86_GRUB_IMAGES || TARGET_ROOTFS_EXT4FS || TARGET_rb532
 116                 default 48
 117                 help
 118                     Allows you to change the root filesystem partition size
 119
 120         config TARGET_ROOTFS_MAXINODE
 121                 int "Maximum number of inodes in root filesystem"
 122                 depends TARGET_ROOTFS_EXT4FS
 123                 default 6000
 124                 help
 125                     Allows you to change the maximum number of inodes in the root filesystem
 126
 127 endmenu
 128
 129 menu "Global build settings"
 130
 131         config ALL
 132                 bool "Select all packages by default"
 133                 default n
 134
 135         comment "General build options"
 136
 137         config DISPLAY_SUPPORT
 138                 bool "Show packages that require graphics support (local or remote)"
 139                 default n
 140
 141         config BUILD_PATENTED
 142                 default y
 143                 bool "Compile with support for patented functionality"
 144                 help
 145                   When this option is disabled, software which provides patented functionality will not be built.
 146                   In case software provides optional support for patented functionality,
 147                   this optional support will get disabled for this package.
 148
 149         config BUILD_NLS
 150                 default n
 151                 bool "Compile with full language support"
 152                 help
 153                   When this option is enabled, packages are built with the full versions of iconv and GNU gettext
 154                   instead of the default OpenWrt stubs. If uClibc is used, it is also built with locale support.
 155
 156         config SHADOW_PASSWORDS
 157                 bool
 158                 prompt "Enable shadow password support"
 159                 default y
 160                 help
 161                   Enable shadow password support.
 162
 163         config CLEAN_IPKG
 164                 bool
 165                 prompt "Remove ipkg/opkg status data files in final images"
 166                 default n
 167                 help
 168                         This removes all ipkg/opkg status data files from the target directory before building the root fs
 169
 170         config COLLECT_KERNEL_DEBUG
 171                 bool
 172                 prompt "Collect kernel debug information"
 173                 select KERNEL_DEBUG_INFO
 174                 default n
 175                 help
 176                         This collects debugging symbols from the kernel and all compiled modules.
 177                         Useful for release builds, so that kernel issues can be debugged offline later.
 178
 179         comment "Kernel build options"
 180
 181         config KERNEL_DEBUG_FS
 182                 bool "Compile the kernel with Debug FileSystem enabled"
 183                 default y
 184                 help
 185                   debugfs is a virtual file system that kernel developers use to put
 186                   debugging files into. Enable this option to be able to read and
 187                   write to these files.
 188
 189         config KERNEL_PROFILING
 190                 bool "Compile the kernel with profiling enabled"
 191                 default n
 192                 help
 193                   Enable the extended profiling support mechanisms used by profilers such
 194                   as OProfile.
 195
 196         config KERNEL_KALLSYMS
 197                 bool "Compile the kernel with symbol table information"
 198                 default n
 199                 help
 200                   This will give you more information in stack traces from kernel oopses
 201
 202         config KERNEL_FTRACE
 203                 bool "Compile the kernel with tracing support"
 204                 default n
 205
 206         config KERNEL_ENABLE_DEFAULT_TRACERS
 207                 bool "Trace process context switches and events"
 208                 depends on KERNEL_FTRACE
 209                 default n
 210
 211         config KERNEL_DEBUG_KERNEL
 212                 bool
 213                 default n
 214
 215         config KERNEL_DEBUG_INFO
 216                 bool "Compile the kernel with debug information"
 217                 default n
 218                 select KERNEL_DEBUG_KERNEL
 219                 help
 220                   This will compile your kernel and modules with debug information.
 221
 222         config KERNEL_DEBUG_LL_UART_NONE
 223                 bool
 224                 default n
 225                 depends on arm
 226
 227         config KERNEL_DEBUG_LL
 228                 bool
 229                 default n
 230                 depends on arm
 231                 select KERNEL_DEBUG_LL_UART_NONE
 232                 help
 233                   ARM low level debugging
 234
 235         config KERNEL_EARLY_PRINTK
 236                 bool "Compile the kernel with early printk"
 237                 default n
 238                 depends on arm
 239                 select KERNEL_DEBUG_KERNEL
 240                 select KERNEL_DEBUG_LL if arm
 241                 help
 242                   Compile the kernel with early printk support.
 243                   This is only useful for debugging purposes to send messages
 244                   over the serial console in early boot.
 245                   Enable this to debug early boot problems.
 246
 247         config KERNEL_AIO
 248                 bool "Compile the kernel with asynchronous IO support"
 249                 default n
 250
 251         config KERNEL_MAGIC_SYSRQ
 252                 bool "Compile the kernel with SysRq support"
 253                 default y
 254
 255         config KERNEL_ELF_CORE
 256                 bool "Enable process core dump support"
 257                 default y
 258
 259         config KERNEL_PROVE_LOCKING
 260                 bool "Enable kernel lock checking"
 261                 select KERNEL_DEBUG_KERNEL
 262                 default n
 263
 264         config KERNEL_PRINTK_TIME
 265                 bool "Enable printk timestamps"
 266                 default y
 267
 268         comment "Package build options"
 269
 270         config DEBUG
 271                 bool
 272                 prompt "Compile packages with debugging info"
 273                 default n
 274                 help
 275                   Adds -g3 to the CFLAGS
 276
 277         config IPV6
 278                 bool
 279                 prompt "Enable IPv6 support in packages"
 280                 default y
 281                 help
 282                   Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts).
 283
 284         config PKG_BUILD_PARALLEL
 285                 bool
 286                 prompt "Compile certain packages parallelized"
 287                 default n
 288                 help
 289                   This adds a -jX option to certain packages that are known to
 290                   behave well for parallel build.
 291
 292                   Note that this may overcommit CPU resources depending on the
 293                   -j level of the main make process, the number of package
 294                   submake jobs selected below and the number of actual CPUs present.
 295                   Example: If the main make is passed a -j4 and the submake -j
 296                   is also set to 4, we may end up with 16 parallel make processes
 297                   in the worst case.
 298
 299                   You get maximum build performance, if you set the package build
 300                   jobs to the number of CPUs (cores) available and also start the main
 301                   make process with -jX, where X is the number of CPUs (cores).
 302                   However, make sure you have enough RAM available for
 303                   NR_CPUS to the power of two (NR_CPUS^2) make jobs.
 304
 305                   If you are unsure, select N.
 306
 307         config PKG_BUILD_JOBS
 308                 int
 309                 prompt "Number of package submake jobs (2-512)"
 310                 range 2 512
 311                 default 2
 312                 depends on PKG_BUILD_PARALLEL
 313                 help
 314                   The number of jobs (-jX) to pass to packages submake.
 315
 316         config PKG_DEFAULT_PARALLEL
 317                 bool
 318                 prompt "Parallelize the default package build rule (May break build)"
 319                 depends on PKG_BUILD_PARALLEL
 320                 default n
 321                 help
 322                   Always set the default package build rules to parallel build.
 323
 324                   WARNING: This may break build or kill your cat, as it builds
 325                   packages with multiple jobs that are probably not tested in
 326                   a parallel build environment.
 327
 328                   Only say Y, if you don't mind fixing broken packages.
 329                   Before reporting build bugs, set this to N and re-run the build.
 330
 331         config TOOLCHAIN_PARALLEL
 332                 bool
 333                 prompt "Parallelize the toolchain build (May break build)"
 334                 depends on PKG_BUILD_PARALLEL
 335                 default n
 336                 help
 337                   Build the toolchain with parallel make jobs.
 338                   This speeds up the toolchain build on SMP machines, but may
 339                   break the build for certain toolchain versions.
 340
 341                   If you say Y, toolchain build might break.
 342                   Before reporting build bugs, set this to N and re-run the build.
 343
 344         comment "Stripping options"
 345
 346         choice
 347                 prompt "Binary stripping method"
 348                 default USE_STRIP   if EXTERNAL_TOOLCHAIN
 349                 default USE_STRIP   if USE_GLIBC || USE_EGLIBC
 350                 default USE_SSTRIP
 351                 help
 352                   Select the binary stripping method you wish to use.
 353
 354                 config NO_STRIP
 355                         bool "none"
 356                         help
 357                           This will install unstripped binaries (useful for native compiling/debugging)
 358
 359                 config USE_STRIP
 360                         bool "strip"
 361                         help
 362                           This will install binaries stripped using strip from binutils
 363
 364
 365                 config USE_SSTRIP
 366                         bool "sstrip"
 367                         depends !DEBUG
 368                         depends !USE_GLIBC
 369                         depends !USE_EGLIBC
 370                         help
 371                           This will install binaries stripped using sstrip
 372         endchoice
 373
 374         config STRIP_ARGS
 375                 string
 376                 prompt "Strip arguments"
 377                 depends USE_STRIP
 378                 default "--strip-unneeded --remove-section=.comment --remove-section=.note" if DEBUG
 379                 default "--strip-all"
 380                 help
 381                   Specifies arguments passed to the strip command when stripping binaries
 382
 383         config STRIP_KERNEL_EXPORTS
 384                 bool "Strip unnecessary exports from the kernel image"
 385                 help
 386                   Reduces kernel size by stripping unused kernel exports from the kernel image
 387                   Note that this might make the kernel incompatible with any kernel modules that
 388                   were not selected at the time the kernel image was created
 389
 390         config USE_MKLIBS
 391                 bool "Strip unnecessary functions from libraries"
 392                 help
 393                   Reduces libraries to only those functions that are necessary for using all
 394                   selected packages (including those selected as <M>)
 395                   Note that this will make the system libraries incompatible with most of the packages
 396                   that are not selected during the build process
 397
 398         choice
 399                 prompt "Preferred standard C++ library"
 400                 default USE_LIBSTDCXX if USE_EGLIBC
 401                 default USE_UCLIBCXX
 402                 help
 403                   Select the preferred standard C++ library for all packages that support this.
 404
 405                 config USE_UCLIBCXX
 406                         bool "uClibc++"
 407
 408                 config USE_LIBSTDCXX
 409                         bool "libstdc++"
 410
 411         endchoice
 412
 413 endmenu
 414
 415 menuconfig DEVEL
 416         bool "Advanced configuration options (for developers)"
 417         default n
 418
 419         config BROKEN
 420                 bool "Show broken platforms / packages" if DEVEL
 421                 default n
 422
 423         config DOWNLOAD_FOLDER
 424                 string "Download folder" if DEVEL
 425                 default ""
 426
 427         config LOCALMIRROR
 428                 string "Local mirror for source packages" if DEVEL
 429                 default ""
 430
 431         config AUTOREBUILD
 432                 bool "Automatic rebuild of packages" if DEVEL
 433                 default y
 434                 help
 435                   Automatically rebuild packages when their files change
 436
 437         config BUILD_SUFFIX
 438                 string "Build suffix to append to the BUILD_DIR variable" if DEVEL
 439                 default ""
 440                 help
 441                   Build suffix to append to the BUILD_DIR variable, i.e: build_dir_suffix
 442
 443         config TARGET_ROOTFS_DIR
 444                 string "Override the default TARGET_ROOTFS_DIR variable" if DEVEL
 445                 default ""
 446                 help
 447                   Override the default TARGET_ROOTFS_DIR variable content $(BUILD_DIR) with custom path.
 448                   Use this option to re-define the location of the target root file system directory.
 449
 450         config CCACHE
 451                 bool "Use ccache" if DEVEL
 452                 default n
 453                 help
 454                   Compiler cache; see http://ccache.samba.org/
 455
 456         config EXTERNAL_KERNEL_TREE
 457                 string "Use external kernel tree" if DEVEL
 458                 default ""
 459
 460         config KERNEL_GIT_CLONE_URI
 461                 string "Enter git repository to clone" if DEVEL
 462                 default ""
 463                 help
 464                   Enter the full git repository path i.e.:
 465                   git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
 466                   This will create a git clone of the kernel in your build
 467                   directory.
 468
 469         config KERNEL_GIT_LOCAL_REPOSITORY
 470                 string "Enter path to local reference repository" if DEVEL
 471                 default ""
 472                 help
 473                   Enter a full pathname to a local reference git repository.
 474                   In this instance, the --refererence option of git clone will
 475                   be used thus creating a quick local clone of your repo.
 476
 477         config BUILD_LOG
 478                 bool "Enable log files during build process" if DEVEL
 479                 help
 480                   If enabled log files will be written to the ./log directory
 481
 482         config SRC_TREE_OVERRIDE
 483                 bool "Enable package source tree override" if DEVEL
 484                 help
 485                   If enabled, you can force a package to use a git tree as source
 486                   code instead of the normal tarball. Create a symlink 'git-src'
 487                   in the package directory, pointing to the .git tree that you want
 488                   to pull the source code from
 489
 490 menuconfig TARGET_OPTIONS
 491         bool "Target Options"  if DEVEL
 492
 493         config TARGET_OPTIMIZATION
 494                 string "Target Optimizations" if TARGET_OPTIONS
 495                 default DEFAULT_TARGET_OPTIMIZATION
 496                 help
 497                   Optimizations to use when building for the target host.
 498
 499         config SOFT_FLOAT
 500                 bool "Use software floating point by default" if TARGET_OPTIONS
 501                 default y
 502                 depends on (arm || armeb || powerpc || mipsel || mips) && !HAS_FPU
 503                 help
 504                   If your target CPU does not have a Floating Point Unit (FPU) or a
 505                   kernel FPU emulator, but you still wish to support floating point
 506                   functions, then everything will need to be compiled with soft floating
 507                   point support (-msoft-float).
 508
 509                   Most people will answer N.
 510
 511 source "toolchain/Config.in"
 512
 513 source "target/imagebuilder/Config.in"
 514 source "target/sdk/Config.in"
 515 source "target/toolchain/Config.in"
 516
 517 source "tmp/.config-package.in"