fixes compile bug of iptables
[openwrt/svn-archive/archive.git] / docs / network-scripts.tex
1 \subsubsection{Using the network scripts}
2
3 To be able to access the network functions, you need to include
4 the necessary shell scripts by running:
5
6 \begin{Verbatim}
7 . /etc/functions.sh # common functions
8 include /lib/network # include /lib/network/*.sh
9 scan_interfaces # read and parse the network config
10 \end{Verbatim}
11
12 Some protocols, such as PPP might change the configured interface names
13 at run time (e.g. \texttt{eth0} => \texttt{ppp0} for PPPoE). That's why you have to run
14 \texttt{scan\_interfaces} instead of reading the values from the config directly.
15 After running \texttt{scan\_interfaces}, the \texttt{'ifname'} option will always contain
16 the effective interface name (which is used for IP traffic) and if the
17 physical device name differs from it, it will be stored in the \texttt{'device'}
18 option.
19 That means that running \texttt{config\_get lan ifname}
20 after \texttt{scan\_interfaces} might not return the same result as running it before.
21
22 After running \texttt{scan\_interfaces}, the following functions are available:
23
24 \begin{itemize}
25 \item{\texttt{find\_config \textit{interface}}} \\
26 looks for a network configuration that includes
27 the specified network interface.
28
29 \item{\texttt{setup\_interface \textit{interface [config] [protocol]}}} \\
30 will set up the specified interface, optionally overriding the network configuration
31 name or the protocol that it uses.
32 \end{itemize}
33
34 \subsubsection{Writing protocol handlers}
35
36 You can add custom protocol handlers by adding shell scripts to
37 \texttt{/lib/network}. They provide the following two shell functions:
38
39 \begin{Verbatim}
40 scan_<protocolname>() {
41 local config="$1"
42 # change the interface names if necessary
43 }
44
45 setup_interface_<protocolname>() {
46 local interface="$1"
47 local config="$2"
48 # set up the interface
49 }
50 \end{Verbatim}
51
52 \texttt{scan\_\textit{protocolname}} is optional and only necessary if your protocol
53 uses a custom device, e.g. a tunnel or a PPP device.
54