net/babel/files/babeld.config

   1 package babeld
   2
   3 config general
   4         # option 'multicast_address' 'ff02:0:0:0:0:0:1:6'
   5         # option 'port' '6697'
   6         # option 'state_file' '/var/lib/babel-state'
   7         # option 'hello_interval' '4'
   8         # option 'wired_hello_interval' '20'
   9         # Enable  detection of idle networks.  This functonality is
  10         # experimental, don't use it unless you know what you are doing.
  11         ## option 'idle_hello_interval' '0'
  12         # option 'kernel_priority' '0'
  13         # Do not use this option unless you know what you are doing, as it can
  14         # cause persistent route flapping.
  15         ## option 'duplication_priority' '0'
  16         # option 'carrier_sense' 'false'
  17         # option 'assume_wireless' 'false'
  18         # option 'no_split_horizon' 'false'
  19         # option 'parasitic' 'false'
  20         # option 'debug' '0'
  21         # Listen for connections from a front-end, e.g. on port 33123.
  22         ## option 'local_server' '33123'
  23         # Use the given kernel routing table for routes inserted by babeld.
  24         ## option 'export_table' '0'
  25         # Export routes from the given kernel routing table.
  26         ## option 'import_table' '0'
  27         # The configuration file is not necessary since you can do everything
  28         # from this file.
  29         # option 'conf_file' '/etc/babeld.conf'
  30         # option 'log_file' '/var/log/babeld.log'
  31
  32 # You can use aliases (like lan, wlan) or real names (like eth0.0).
  33 # If you use an alias, it must be already defined when babeld starts.
  34 # Otherwise, the name is taken literally and the interface can be
  35 # brought up later (useful for tunnels for instance).
  36 config interface wlan
  37         # Remove this line to enable babeld on this interface
  38         option 'ignore' 'true'
  39         # option 'wired' 'auto'
  40         # option 'link_quality' 'auto'
  41         # option 'split_horizon' 'auto'
  42         # The default is 96 for wired interfaces, and 256 for wireless ones
  43         ## option 'rxcost' '256'
  44         # The  default  is  specified with the -h and -H command-line flags.
  45         ## option 'hello_interval' '4'
  46         # This can be set to a  fairly  large  value,  unless significant
  47         # packet loss is expected.  The default is four times the hello
  48         # interval.
  49         ## option 'update_interval' '16'
  50
  51 config interface lan
  52         option 'ignore' 'true'
  53
  54 # A filter consists in a type ('in', 'out' or 'redistribute'), an action
  55 # ('allow', 'deny' or 'metric xxx') and a set of selectors ('ip', 'eq',
  56 # etc.).  See /etc/babeld.conf for more details.
  57 # Here is a sample filter wich redistributes the default route if its
  58 # protocol number is "boot", e.g. when it installed by dhcp.  It is
  59 # disabled by default.
  60 config filter
  61         option 'ignore' 'true'
  62         # Type
  63         option 'type' 'redistribute'
  64         # Selectors: ip, eq, le, ge, neigh, id, proto, local, if
  65         option 'ip' '0.0.0.0/0'
  66         option 'le' '0'
  67         option 'proto' '3'
  68         # Action
  69         option 'action' 'metric 128'
  70