Add Accescube documentation
[openwrt/svn-archive/archive.git] / openwrt / docs / hardware / 4g / accesscube / dmesg-2_4_27.txt
1 CPU revision is: 01030202
2 Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes.
3 Primary data cache 16kB, 4-way, linesize 32 bytes.
4 Linux version 2.4.27 (rhandorf@devel) (gcc version 3.3.4) #1 Mon Dec 5
5 15:55:07 EST 2005
6 4G Systems MTX-1 Board
7 Au1500 AD (PRId 01030202) @ 396MHZ
8 BCLK switching enabled!
9 Determined physical RAM map:
10 memory: 04000000 @ 00000000 (usable)
11 On node 0 totalpages: 16384
12 zone(0): 16384 pages.
13 zone(1): 0 pages.
14 zone(2): 0 pages.
15 Kernel command line: root=/dev/mtdblock/0 console=ttyS0,115200
16 usb_ohci=base:0x10100000,len:0x100000,irq:26
17 calculating r4koff... 003c6cc0(3960000)
18 CPU frequency 396.00 MHz
19 Calibrating delay loop... 395.67 BogoMIPS
20 Memory: 61504k/65536k available (1769k kernel code, 4032k reserved, 260k data,
21 88k init, 0k highmem)
22 Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
23 Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
24 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
25 Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
26 Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
27 Checking for 'wait' instruction... unavailable.
28 POSIX conformance testing by UNIFIX
29 Autoconfig PCI channel 0x80316838
30 Scanning bus 00, I/O 0x00000300:0x00100000, Mem 0x40000000:0x50000000
31 00:00.0 Class 0200: 168c:001b (rev 01)
32 Mem at 0x40000000 [size=0x10000]
33 00:01.0 Class 0200: 168c:001b (rev 01)
34 Mem at 0x40010000 [size=0x10000]
35 Non-coherent PCI accesses enabled
36 Linux NET4.0 for Linux 2.4
37 Based upon Swansea University Computer Society NET3.039
38 Initializing RT netlink socket
39 Starting kswapd
40 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
41 devfs: boot_options: 0x1
42 Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
43 JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
44 pty: 256 Unix98 ptys configured
45 Serial driver version 1.01 (2001-02-08) with no serial options enabled
46 ttyS00 at 0xb1100000 (irq = 0) is a 16550
47 ttyS01 at 0xb1400000 (irq = 3) is a 16550
48 loop: loaded (max 8 devices)
49 au1000eth.c:1.4 ppopov@mvista.com
50 eth0: Au1x Ethernet found at 0xb1500000, irq 28
51 eth0: LSI 80227 10/100 BaseT PHY at phy address 31
52 eth0: Using LSI 80227 10/100 BaseT PHY as default
53 MTX-1 flash: probing 32-bit flash bus at 1e000000
54 MTX-1 flash: Found 2 x16 devices at 0x0 in 32-bit mode
55 Amd/Fujitsu Extended Query Table at 0x0040
56 MTX-1 flash: CFI does not contain boot bank location. Assuming top.
57 number of CFI chips: 1
58 cfi_cmdset_0002: Disabling fast programming due to code brokenness.
59 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
60 Creating 4 MTD partitions on "MTX-1 flash":
61 0x00000000-0x01c00000 : "user fs"
62 0x01c00000-0x01d00000 : "yamon"
63 0x01d00000-0x01fc0000 : "raw kernel"
64 0x01fc0000-0x02000000 : "yamon environment"
65 usb.c: registered new driver usbdevfs
66 usb.c: registered new driver hub
67 host/usb-ohci.c: USB OHCI at membase 0xb0100000, IRQ 26
68 host/usb-ohci.c: usb-builtin, non-PCI OHCI
69 usb.c: new USB bus registered, assigned bus number 1
70 hub.c: USB hub found
71 hub.c: 2 ports detected
72 Initializing Cryptographic API
73 NET4: Linux TCP/IP 1.0 for NET4.0
74 IP Protocols: ICMP, UDP, TCP, IGMP
75 IP: routing cache hash table of 512 buckets, 4Kbytes
76 TCP: Hash tables configured (established 4096 bind 8192)
77 Linux IP multicast router 0.06 plus PIM-SM
78 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
79 MTX-1 watchdog driver
80 MTX-1 System Button driver
81 VFS: Mounted root (jffs2 filesystem) readonly.
82 Mounted devfs on /dev
83 Freeing unused kernel memory: 88k freed
84 Algorithmics/MIPS FPU Emulator v1.5
85 eth0: link up
86 eth0: going to full duplex