openwrt/package/base-files/default/etc/init.d/S10boot

   1 #!/bin/sh
   2 . /etc/nvram.sh
   3
   4 [ "$(uname -r|grep -c 2.4)" = "1" ] && {
   5         echo "S" > /proc/jffs2_bbc
   6 }
   7
   8 mkdir -p /var/run
   9 mkdir -p /var/log
  10 touch /var/log/wtmp
  11 touch /var/log/lastlog
  12
  13 [ -x /usr/sbin/nvram ] && {
  14   [ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
  15     # if default wifi mac, set two higher than the lan mac
  16     nvram set il0macaddr=$(nvram get et0macaddr|
  17     awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
  18   }
  19
  20   # set up the vlan*ports variables for the asus wl-500g deluxe
  21   # if they don't already exist
  22   [  "$(nvram get boardtype)" = "bcm95365r" \
  23   -a "$(nvram get boardnum)" = "45" \
  24   -a -z "$(nvram get vlan0ports)" \
  25   -a -z "$(nvram get vlan1ports)" ] && {
  26         nvram set vlan0ports="1 2 3 4 5*"
  27         nvram set vlan1ports="0 5"
  28   }
  29 }
  30
  31 sed 's/^[^#]/insmod &/' /etc/modules /etc/modules.d/* 2>&-|ash
  32
  33 ifconfig lo 127.0.0.1 up
  34 ifconfig eth0 promisc
  35
  36 [ "$(uname -r|grep -c 2.6)" = "1" ] && [ -x /sbin/robocfg ] && {
  37   robocfg switch disable vlans enable reset vlan 0 ports "0 1 2 3 5t" vlan 1 ports "4 5t" port 4 state enabled stp none switch enable
  38   robocfg show
  39 }
  40
  41 HOSTNAME=$(nvram get wan_hostname)
  42 HOSTNAME=${HOSTNAME%%.*}
  43 echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname
  44
  45 vconfig set_name_type VLAN_PLUS_VID_NO_PAD
  46
  47 # automagically run firstboot
  48 [ -z "$FAILSAFE" -a -z "$(nvram get no_root_swap)" ] && {
  49         { mount|grep "on / type jffs2" 1>&-; } || firstboot
  50 }