f69caf8b913a1ee999da05bec46595605a263778
[openwrt/svn-archive/archive.git] / openwrt / target / linux / package / spca5xx / patches / 01-kmod-build.patch
1 diff -ruN spca5xx-20051105-old/Makefile spca5xx-20051105-new/Makefile
2 --- spca5xx-20051105-old/Makefile 2005-11-05 19:18:26.000000000 +0100
3 +++ spca5xx-20051105-new/Makefile 2005-12-09 10:34:47.000000000 +0100
4 @@ -33,7 +33,9 @@
5 DEFINES += -DCONFIG_USB_SPCA5XX_MODULE=1 -DMODULE -D__KERNEL__
6 DEFINES += -DVID_HARDWARE_SPCA5XX=0xFF -DSPCA5XX_VERSION=\"$(VERSION)\"
7
8 -ifneq ($(shell uname -r | cut -d. -f1,2), 2.4)
9 +KERNELVERSION=$(shell uname -r | cut -d. -f1,2)
10 +
11 +ifneq ($(KERNELVERSION), 2.4)
12
13 ifneq ($(KERNELRELEASE),) # We were called by kbuild
14 CFLAGS += $(DEFINES)
15 @@ -68,158 +70,19 @@
16
17 else # kernel version test
18
19 -#############################################################################
20 -# For Linux 2.4 users.
21 -# Change the following lines according to your system configuration.
22 -# It is important to configure your particular source tree ("make dep") before
23 -# compiling this module!
24 -#############################################################################
25 -###
26 -# This makefile will build the spca50x driver module external to the kernel
27 -# source tree. It makes it easier to swap kernels.
28 -
29 +CFLAGS += $(DEFINES)
30
31 -KERNEL_VERSION = `uname -r`
32 +spca5xx-objs := drivers/usb/spca5xx.o drivers/usb/spcadecoder.o
33
34 -###
35 -# Location of the header files (most importantly the config files)
36 -# for the kernel you want to build the module against.
37 -# This should be correct for the currently installed kernel on your machine.
38 -KINCLUDE = /lib/modules/$(KERNEL_VERSION)/build/include
39 -KERNEL_ACFILE = $(KINCLUDE)/linux/autoconf.h
40 -KERNEL_MODVERSIONSFILE = $(KINCLUDE)/linux/modversions.h
41 -MODULE_INSTALLDIR = /lib/modules/$(KERNEL_VERSION)/kernel/drivers/usb/
42 -
43 -# Detect module versioning support
44 -ifneq ($(strip $(shell grep 'define CONFIG_MODVERSIONS 1' $(KERNEL_ACFILE))),)
45 - DEFINES += -DMODVERSIONS -include $(KERNEL_MODVERSIONSFILE)
46 -endif
47 +obj-m += spca5xx.o
48 +obj-y := $(spca5xx-objs)
49
50 -# Detect SMP support
51 -ifneq ($(strip $(shell grep 'define CONFIG_SMP 1' $(KERNEL_ACFILE))),)
52 - DEFINES += -D__SMP__ -DSMP
53 -endif
54 +O_TARGET := $(obj-m)
55
56 -# Setup the tools
57 -CC = gcc
58 -LD = ld
59 -
60 -# Setup compiler warnings
61 -WARNINGS = -Wall -Wpointer-arith
62 -WARNINGS += -Wcast-align -Wwrite-strings -Wstrict-prototypes
63 -WARNINGS += -Wuninitialized -Wreturn-type -Wunused -Wparentheses
64 -
65 -# Setup compiler flags
66 -CFLAGS = -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe
67 -CFLAGS += -mpreferred-stack-boundary=2
68 -CFLAGS += -I$(KINCLUDE) -Idrivers/usb
69 -
70 -# Setup link flags
71 -LDFLAGS = --strip-debug -r
72 -
73 -# Setup the list of files to be included in a distribution
74 -DIST_FILES = CHANGELOG \
75 - README \
76 - Makefile \
77 - drivers/usb/Config.in \
78 - drivers/usb/spcadecoder.c \
79 - drivers/usb/spcadecoder.h \
80 - drivers/usb/jpeg_header.h \
81 - drivers/usb/jpeg_qtables.h \
82 - drivers/usb/spcagamma.h \
83 - drivers/usb/spcaCompat.h \
84 - drivers/usb/spcausb.h \
85 - drivers/usb/spca500_init.h \
86 - drivers/usb/spca501_init.h \
87 - drivers/usb/sp5xxfw2.dat \
88 - drivers/usb/sp5xxfw2.h \
89 - drivers/usb/spca505_init.h \
90 - drivers/usb/spca506.h \
91 - drivers/usb/spca508_init.h \
92 - drivers/usb/spca561.h \
93 - drivers/usb/sonix.h \
94 - drivers/usb/cs2102.h \
95 - drivers/usb/hv7131b.h \
96 - drivers/usb/icm105a.h \
97 - drivers/usb/hv7131c.h \
98 - drivers/usb/hdcs2020.h \
99 - drivers/usb/pb0330.h \
100 - drivers/usb/tas5130c.h \
101 - drivers/usb/zc3xx.h\
102 - drivers/usb/tv8532.h\
103 - drivers/usb/cxlib.h\
104 - drivers/usb/sn9cxxx.h\
105 - drivers/usb/cx11646.h\
106 - drivers/usb/pac207.h\
107 - drivers/usb/spca5xx.c \
108 - drivers/usb/spca5xx.h
109 -
110 -OBJS = drivers/usb/spcadecoder.o \
111 - drivers/usb/spca5xx.o
112 -
113 -BINARY = spca5xx.o
114 -
115 -###
116 -# Targets follow here
117 -
118 -binary: $(OBJS)
119 - @echo Linking $(BINARY)
120 - @$(LD) $(LDFLAGS) -o $(BINARY) $(OBJS)
121 -
122 -install: binary
123 - @echo Installing.. Your root password may be required.
124 - su -c "make install-root"
125 -
126 -install-root:
127 - @echo Installing..
128 - @mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb
129 - @rm -f /lib/modules/`uname -r`/kernel/drivers/usb/spca50x.o
130 - @rm -f /lib/modules/`uname -r`/kernel/drivers/usb/et61x.o
131 - @cp spca5xx.o /lib/modules/`uname -r`/kernel/drivers/usb/spca5xx.o
132 - @/sbin/depmod
133 -
134 -dist: clean binary
135 - @echo Making distributable archives
136 - @rm -f spca5xx-src-$(VERSION).tar.gz
137 - @tar zcf spca5xx-src-$(VERSION).tar.gz $(DIST_FILES)
138 - @rm -f spca5xx-module-$(VERSION).tar.gz
139 - @cp $(BINARY) spca5xx-$(VERSION).o
140 - @tar zcf spca5xx-module-$(VERSION).tar.gz spca5xx-$(VERSION).o README
141 - @rm spca5xx-$(VERSION).o
142 -
143 -.c.o: Makefile $*.c
144 - @echo Compiling $*.c
145 - @$(CC) $(CFLAGS) $(WARNINGS) $(DEFINES) -c $*.c -o $*.o
146 -
147 -###
148 -# Dependencies follow here
149 -
150 -drivers/usb/spca5xx.o: drivers/usb/spca5xx.h \
151 - drivers/usb/spcaCompat.h \
152 - drivers/usb/spcausb.h \
153 - drivers/usb/sonix.h \
154 - drivers/usb/spca500_init.h \
155 - drivers/usb/spca501_init.h \
156 - drivers/usb/sp5xxfw2.h \
157 - drivers/usb/spca505_init.h \
158 - drivers/usb/spca506.h \
159 - drivers/usb/spca508_init.h \
160 - drivers/usb/spca561.h \
161 - drivers/usb/zc3xx.h\
162 - drivers/usb/tv8532.h\
163 - drivers/usb/cx11646.h\
164 - drivers/usb/mr97311.h\
165 - drivers/usb/sn9cxxx.h\
166 - drivers/usb/pac207.h\
167 -
168 -
169 -drivers/usb/spcadecoder.o: drivers/usb/spcadecoder.h \
170 - drivers/usb/spcagamma.h \
171 - drivers/usb/jpeg_header.h
172 +-include $(TOPDIR)/Rules.make
173
174 endif # End kernel version test
175
176 -
177 ##############################################################################
178 # OTHER TARGETS
179 ##############################################################################