package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff

   1 diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
   2 index 9c735c6..a32d772 100644
   3 --- a/arch/arm/dts/Makefile
   4 +++ b/arch/arm/dts/Makefile
   5 @@ -103,6 +103,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
   6         sun7i-a20-ainol-aw1.dtb \
   7         sun7i-a20-bananapi.dtb \
   8         sun7i-a20-bananapro.dtb \
   9 +       sun7i-a20-lamobo-r1.dtb \
  10         sun7i-a20-cubieboard2.dtb \
  11         sun7i-a20-cubietruck.dtb \
  12         sun7i-a20-hummingbird.dtb \
  13 diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
  14 b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
  15 new file mode 100644
  16 index 0000000..a77fb5c
  17 --- /dev/null
  18 +++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
  19 @@ -0,0 +1,231 @@
  20 +/*
  21 + * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
  22 + *
  23 + * Hans de Goede <hdegoede@redhat.com>
  24 + *
  25 + * This file is dual-licensed: you can use it either under the terms
  26 + * of the GPL or the X11 license, at your option. Note that this dual
  27 + * licensing only applies to this file, and not this project as a
  28 + * whole.
  29 + *
  30 + *  a) This file is free software; you can redistribute it and/or
  31 + *     modify it under the terms of the GNU General Public License as
  32 + *     published by the Free Software Foundation; either version 2 of the
  33 + *     License, or (at your option) any later version.
  34 + *
  35 + *     This file is distributed in the hope that it will be useful,
  36 + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  37 + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  38 + *     GNU General Public License for more details.
  39 + *
  40 + * Or, alternatively,
  41 + *
  42 + *  b) Permission is hereby granted, free of charge, to any person
  43 + *     obtaining a copy of this software and associated documentation
  44 + *     files (the "Software"), to deal in the Software without
  45 + *     restriction, including without limitation the rights to use,
  46 + *     copy, modify, merge, publish, distribute, sublicense, and/or
  47 + *     sell copies of the Software, and to permit persons to whom the
  48 + *     Software is furnished to do so, subject to the following
  49 + *     conditions:
  50 + *
  51 + *     The above copyright notice and this permission notice shall be
  52 + *     included in all copies or substantial portions of the Software.
  53 + *
  54 + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  55 + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  56 + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  57 + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  58 + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  59 + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  60 + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  61 + *     OTHER DEALINGS IN THE SOFTWARE.
  62 + */
  63 +
  64 +/dts-v1/;
  65 +#include "sun7i-a20.dtsi"
  66 +#include "sunxi-common-regulators.dtsi"
  67 +
  68 +#include <dt-bindings/gpio/gpio.h>
  69 +#include <dt-bindings/interrupt-controller/irq.h>
  70 +#include <dt-bindings/pinctrl/sun4i-a10.h>
  71 +
  72 +/ {
  73 +       model = "Lamobo Banana Pi R1";
  74 +       compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
  75 +
  76 +       aliases {
  77 +               serial0 = &uart0;
  78 +               serial1 = &uart3;
  79 +               serial2 = &uart7;
  80 +       };
  81 +
  82 +       chosen {
  83 +               stdout-path = "serial0:115200n8";
  84 +       };
  85 +
  86 +       leds {
  87 +               compatible = "gpio-leds";
  88 +               pinctrl-names = "default";
  89 +               pinctrl-0 = <&led_pins_bananapi>;
  90 +
  91 +               green {
  92 +                       label = "bananapi:green:usr";
  93 +                       gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
  94 +               };
  95 +       };
  96 +
  97 +       reg_gmac_3v3: gmac-3v3 {
  98 +               compatible = "regulator-fixed";
  99 +               pinctrl-names = "default";
 100 +               pinctrl-0 = <&gmac_power_pin_bananapi>;
 101 +               regulator-name = "gmac-3v3";
 102 +               regulator-min-microvolt = <3300000>;
 103 +               regulator-max-microvolt = <3300000>;
 104 +               startup-delay-us = <100000>;
 105 +               enable-active-high;
 106 +               gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
 107 +       };
 108 +};
 109 +
 110 +&ahci {
 111 +       status = "okay";
 112 +};
 113 +
 114 +&ehci0 {
 115 +       status = "okay";
 116 +};
 117 +
 118 +&ehci1 {
 119 +       status = "okay";
 120 +};
 121 +
 122 +&gmac {
 123 +       pinctrl-names = "default";
 124 +       pinctrl-0 = <&gmac_pins_rgmii_a>;
 125 +       phy = <&phy1>;
 126 +       phy-mode = "rgmii";
 127 +       phy-supply = <&reg_gmac_3v3>;
 128 +       status = "okay";
 129 +
 130 +       phy1: ethernet-phy@1 {
 131 +               reg = <1>;
 132 +       };
 133 +};
 134 +
 135 +&i2c0 {
 136 +       pinctrl-names = "default";
 137 +       pinctrl-0 = <&i2c0_pins_a>;
 138 +       status = "okay";
 139 +
 140 +       axp209: pmic@34 {
 141 +               compatible = "x-powers,axp209";
 142 +               reg = <0x34>;
 143 +               interrupt-parent = <&nmi_intc>;
 144 +               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 145 +
 146 +               interrupt-controller;
 147 +               #interrupt-cells = <1>;
 148 +       };
 149 +};
 150 +
 151 +&i2c2 {
 152 +       pinctrl-names = "default";
 153 +       pinctrl-0 = <&i2c2_pins_a>;
 154 +       status = "okay";
 155 +};
 156 +
 157 +&ir0 {
 158 +       pinctrl-names = "default";
 159 +       pinctrl-0 = <&ir0_rx_pins_a>;
 160 +       status = "okay";
 161 +};
 162 +
 163 +&mmc0 {
 164 +       pinctrl-names = "default";
 165 +       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
 166 +       vmmc-supply = <&reg_vcc3v3>;
 167 +       bus-width = <4>;
 168 +       cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
 169 +       cd-inverted;
 170 +       status = "okay";
 171 +};
 172 +
 173 +&ohci0 {
 174 +       status = "okay";
 175 +};
 176 +
 177 +&ohci1 {
 178 +       status = "okay";
 179 +};
 180 +
 181 +&pio {
 182 +       mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
 183 +               allwinner,pins = "PH10";
 184 +               allwinner,function = "gpio_in";
 185 +               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 186 +               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 187 +       };
 188 +
 189 +       gmac_power_pin_bananapi: gmac_power_pin@0 {
 190 +               allwinner,pins = "PH23";
 191 +               allwinner,function = "gpio_out";
 192 +               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 193 +               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 194 +       };
 195 +
 196 +       led_pins_bananapi: led_pins@0 {
 197 +               allwinner,pins = "PH24";
 198 +               allwinner,function = "gpio_out";
 199 +               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 200 +               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 201 +       };
 202 +
 203 +       ir0_tx_pins_a: ir0@1 {
 204 +               allwinner,pins = "PB3";
 205 +               allwinner,function = "ir0";
 206 +               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 207 +               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 208 +               };
 209 +
 210 +};
 211 +
 212 +&reg_usb1_vbus {
 213 +       status = "okay";
 214 +};
 215 +
 216 +&reg_usb2_vbus {
 217 +       status = "okay";
 218 +};
 219 +
 220 +&spi0 {
 221 +       pinctrl-names = "default";
 222 +       pinctrl-0 = <&spi0_pins_a>,
 223 +                   <&spi0_cs0_pins_a>,
 224 +                   <&spi0_cs1_pins_a>;
 225 +       status = "okay";
 226 +};
 227 +
 228 +&uart0 {
 229 +       pinctrl-names = "default";
 230 +       pinctrl-0 = <&uart0_pins_a>;
 231 +       status = "okay";
 232 +};
 233 +
 234 +&uart3 {
 235 +       pinctrl-names = "default";
 236 +       pinctrl-0 = <&uart3_pins_b>;
 237 +       status = "okay";
 238 +};
 239 +
 240 +&uart7 {
 241 +       pinctrl-names = "default";
 242 +       pinctrl-0 = <&uart7_pins_a>;
 243 +       status = "okay";
 244 +};
 245 +
 246 +&usbphy {
 247 +       usb1_vbus-supply = <&reg_usb1_vbus>;
 248 +       usb2_vbus-supply = <&reg_usb2_vbus>;
 249 +       status = "okay";
 250 +};
 251 diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
 252 index 7a42055..abf2c1c 100644
 253 --- a/board/sunxi/MAINTAINERS
 254 +++ b/board/sunxi/MAINTAINERS
 255 @@ -30,6 +30,7 @@ F:    include/configs/sun7i.h
 256  F:     configs/A20-OLinuXino_MICRO_defconfig
 257  F:     configs/Bananapi_defconfig
 258  F:     configs/Bananapro_defconfig
 259 +F:     configs/Lamobo_R1_defconfig
 260  F:     configs/i12-tvbox_defconfig
 261  F:     configs/Linksprite_pcDuino3_defconfig
 262  F:     configs/Linksprite_pcDuino3_fdt_defconfig
 263 diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig
 264 new file mode 100644
 265 index 0000000..bf665e7
 266 --- /dev/null
 267 +++ b/configs/Lamobo_R1_defconfig
 268 @@ -0,0 +1,17 @@
 269 +CONFIG_ARM=y
 270 +CONFIG_ARCH_SUNXI=y
 271 +CONFIG_MACH_SUN7I=y
 272 +CONFIG_DRAM_CLK=432
 273 +CONFIG_GMAC_TX_DELAY=4
 274 +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
 275 +CONFIG_SPL=y
 276 +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
 277 +CONFIG_ETH_DESIGNWARE=y
 278 +# CONFIG_CMD_IMLS is not set
 279 +# CONFIG_CMD_FLASH is not set
 280 +# CONFIG_CMD_FPGA is not set
 281 +CONFIG_DM_SERIAL=y
 282 +CONFIG_USB=y
 283 +CONFIG_DM_USB=y
 284 +CONFIG_NETDEVICES=y
 285 +CONFIG_NET=y