[hostapd] bump to version 0.6.9.
[openwrt/svn-archive/archive.git] / package / hostapd / files / mini.config
1 # Example hostapd build time configuration
2 #
3 # This file lists the configuration options that are used when building the
4 # hostapd binary. All lines starting with # are ignored. Configuration option
5 # lines must be commented out complete, if they are not to be included, i.e.,
6 # just setting VARIABLE=n is not disabling that variable.
7 #
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cass, these lines should use += in order not
10 # to override previous values of the variables.
11
12 # Driver interface for Host AP driver
13 CONFIG_DRIVER_HOSTAP=y
14
15 # Driver interface for wired authenticator
16 CONFIG_DRIVER_WIRED=y
17
18 # Driver interface for madwifi driver
19 CONFIG_DRIVER_MADWIFI=y
20 #CFLAGS += -I../../madwifi # change to the madwifi source directory
21
22 # Driver interface for Prism54 driver
23 #CONFIG_DRIVER_PRISM54=y
24
25 # Driver interface for drivers using the nl80211 kernel interface
26 CONFIG_DRIVER_NL80211=y
27 # driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
28 # shipped with your distribution yet. If that is the case, you need to build
29 # newer libnl version and point the hostapd build to use it.
30 #LIBNL=/usr/src/libnl
31 #CFLAGS += -I$(LIBNL)/include
32 #LIBS += -L$(LIBNL)/lib
33
34 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
35 #CONFIG_DRIVER_BSD=y
36 #CFLAGS += -I/usr/local/include
37 #LIBS += -L/usr/local/lib
38
39 # Driver interface for no driver (e.g., RADIUS server only)
40 #CONFIG_DRIVER_NONE=y
41
42 # IEEE 802.11F/IAPP
43 CONFIG_IAPP=y
44
45 # WPA2/IEEE 802.11i RSN pre-authentication
46 CONFIG_RSN_PREAUTH=y
47
48 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
49 CONFIG_PEERKEY=y
50
51 # IEEE 802.11w (management frame protection)
52 # This version is an experimental implementation based on IEEE 802.11w/D1.0
53 # draft and is subject to change since the standard has not yet been finalized.
54 # Driver support is also needed for IEEE 802.11w.
55 #CONFIG_IEEE80211W=y
56
57 # Integrated EAP server
58 #CONFIG_EAP=y
59
60 # EAP-MD5 for the integrated EAP server
61 #CONFIG_EAP_MD5=y
62
63 # EAP-TLS for the integrated EAP server
64 #CONFIG_EAP_TLS=y
65
66 # EAP-MSCHAPv2 for the integrated EAP server
67 #CONFIG_EAP_MSCHAPV2=y
68
69 # EAP-PEAP for the integrated EAP server
70 #CONFIG_EAP_PEAP=y
71
72 # EAP-GTC for the integrated EAP server
73 #CONFIG_EAP_GTC=y
74
75 # EAP-TTLS for the integrated EAP server
76 #CONFIG_EAP_TTLS=y
77
78 # EAP-SIM for the integrated EAP server
79 #CONFIG_EAP_SIM=y
80
81 # EAP-AKA for the integrated EAP server
82 #CONFIG_EAP_AKA=y
83
84 # EAP-AKA' for the integrated EAP server
85 # This requires CONFIG_EAP_AKA to be enabled, too.
86 #CONFIG_EAP_AKA_PRIME=y
87
88 # EAP-PAX for the integrated EAP server
89 #CONFIG_EAP_PAX=y
90
91 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
92 #CONFIG_EAP_PSK=y
93
94 # EAP-SAKE for the integrated EAP server
95 #CONFIG_EAP_SAKE=y
96
97 # EAP-GPSK for the integrated EAP server
98 #CONFIG_EAP_GPSK=y
99 # Include support for optional SHA256 cipher suite in EAP-GPSK
100 #CONFIG_EAP_GPSK_SHA256=y
101
102 # EAP-FAST for the integrated EAP server
103 # Note: Default OpenSSL package does not include support for all the
104 # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
105 # the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
106 # to add the needed functions.
107 #CONFIG_EAP_FAST=y
108
109 # Wi-Fi Protected Setup (WPS)
110 #CONFIG_WPS=y
111 # Enable UPnP support for external WPS Registrars
112 #CONFIG_WPS_UPNP=y
113
114 # EAP-IKEv2
115 #CONFIG_EAP_IKEV2=y
116
117 # Trusted Network Connect (EAP-TNC)
118 #CONFIG_EAP_TNC=y
119
120 # PKCS#12 (PFX) support (used to read private key and certificate file from
121 # a file that usually has extension .p12 or .pfx)
122 #CONFIG_PKCS12=y
123
124 # RADIUS authentication server. This provides access to the integrated EAP
125 # server from external hosts using RADIUS.
126 #CONFIG_RADIUS_SERVER=y
127
128 # Build IPv6 support for RADIUS operations
129 #CONFIG_IPV6=y
130
131 # IEEE Std 802.11r-2008 (Fast BSS Transition)
132 #CONFIG_IEEE80211R=y
133
134 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
135 # the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
136 #CONFIG_DRIVER_RADIUS_ACL=y
137
138 # IEEE 802.11n (High Throughput) support
139 CONFIG_IEEE80211N=y
140
141 # Remove debugging code that is printing out debug messages to stdout.
142 # This can be used to reduce the size of the hostapd considerably if debugging
143 # code is not needed.
144 #CONFIG_NO_STDOUT_DEBUG=y