package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

   1 #!/bin/sh
   2 . /lib/netifd/netifd-wireless.sh
   3 . /lib/netifd/hostapd.sh
   4
   5 init_wireless_driver "$@"
   6
   7 MP_CONFIG_INT="mesh_retry_timeout mesh_confirm_timeout mesh_holding_timeout mesh_max_peer_links
   8                mesh_max_retries mesh_ttl mesh_element_ttl mesh_hwmp_max_preq_retries
   9                mesh_path_refresh_time mesh_min_discovery_timeout mesh_hwmp_active_path_timeout
  10                mesh_hwmp_preq_min_interval mesh_hwmp_net_diameter_traversal_time mesh_hwmp_rootmode
  11                mesh_hwmp_rann_interval mesh_gate_announcements mesh_sync_offset_max_neighor
  12                mesh_rssi_threshold mesh_hwmp_active_path_to_root_timeout mesh_hwmp_root_interval
  13                mesh_hwmp_confirmation_interval mesh_awake_window mesh_plink_timeout"
  14 MP_CONFIG_BOOL="mesh_auto_open_plinks mesh_fwding"
  15 MP_CONFIG_STRING="mesh_power_mode"
  16
  17 drv_mac80211_init_device_config() {
  18         hostapd_common_add_device_config
  19
  20         config_add_string path phy 'macaddr:macaddr'
  21         config_add_string hwmode
  22         config_add_int beacon_int chanbw frag rts
  23         config_add_int rxantenna txantenna antenna_gain txpower distance
  24         config_add_boolean noscan
  25         config_add_array ht_capab
  26         config_add_boolean \
  27                 rxldpc \
  28                 short_gi_80 \
  29                 short_gi_160 \
  30                 tx_stbc_2by1 \
  31                 su_beamformer \
  32                 su_beamformee \
  33                 mu_beamformer \
  34                 mu_beamformee \
  35                 vht_txop_ps \
  36                 htc_vht \
  37                 rx_antenna_pattern \
  38                 tx_antenna_pattern
  39         config_add_int vht_max_mpdu vht_max_rx_stbc vht_link_adapt vht160
  40 }
  41
  42 drv_mac80211_init_iface_config() {
  43         hostapd_common_add_bss_config
  44
  45         config_add_string 'macaddr:macaddr' ifname
  46
  47         config_add_boolean wds powersave
  48         config_add_int maxassoc
  49         config_add_int max_listen_int
  50         config_add_int dtim_interval
  51
  52         # mesh
  53         config_add_string mesh_id
  54         config_add_int $MP_CONFIG_INT
  55         config_add_boolean $MP_CONFIG_BOOL
  56         config_add_string $MP_CONFIG_STRING
  57 }
  58
  59 mac80211_add_capabilities() {
  60         local __var="$1"; shift
  61         local __mask="$1"; shift
  62         local __out= oifs
  63
  64         oifs="$IFS"
  65         IFS=:
  66         for capab in "$@"; do
  67                 set -- $capab
  68
  69                 [ "$(($4))" -gt 0 ] || continue
  70                 [ "$(($__mask & $2))" -eq "$((${3:-$2}))" ] || continue
  71                 __out="$__out[$1]"
  72         done
  73         IFS="$oifs"
  74
  75         export -n -- "$__var=$__out"
  76 }
  77
  78 mac80211_hostapd_setup_base() {
  79         local phy="$1"
  80
  81         json_select config
  82
  83         [ "$auto_channel" -gt 0 ] && channel=acs_survey
  84
  85         json_get_vars noscan htmode
  86         json_get_values ht_capab_list ht_capab
  87
  88         ieee80211n=1
  89         ht_capab=
  90         case "$htmode" in
  91                 VHT20|HT20) ;;
  92                 HT40*|VHT40|VHT80|VHT160)
  93                         case "$hwmode" in
  94                                 a)
  95                                         case "$(( ($channel / 4) % 2 ))" in
  96                                                 1) ht_capab="[HT40+]";;
  97                                                 0) ht_capab="[HT40-]";;
  98                                         esac
  99                                 ;;
 100                                 *)
 101                                         case "$htmode" in
 102                                                 HT40+) ht_capab="[HT40+]";;
 103                                                 HT40-) ht_capab="[HT40-]";;
 104                                                 *)
 105                                                         if [ "$channel" -lt 7 ]; then
 106                                                                 ht_capab="[HT40+]"
 107                                                         else
 108                                                                 ht_capab="[HT40-]"
 109                                                         fi
 110                                                 ;;
 111                                         esac
 112                                 ;;
 113                         esac
 114                         [ "$auto_channel" -gt 0 ] && ht_capab="[HT40+]"
 115                 ;;
 116                 *) ieee80211n= ;;
 117         esac
 118
 119         [ -n "$ieee80211n" ] && {
 120                 append base_cfg "ieee80211n=1" "$N"
 121
 122                 json_get_vars \
 123                         ldpc:1 \
 124                         greenfield:1 \
 125                         short_gi_20:1 \
 126                         short_gi_40:1 \
 127                         tx_stbc:1 \
 128                         rx_stbc:3 \
 129                         dsss_cck_40:1
 130
 131                 ht_cap_mask=0
 132                 for cap in $(iw phy "$phy" info | grep 'Capabilities:' | cut -d: -f2); do
 133                         ht_cap_mask="$(($ht_cap_mask | $cap))"
 134                 done
 135
 136                 cap_rx_stbc=$((($ht_cap_mask >> 8) & 3))
 137                 [ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
 138                 ht_cap_mask="$(( ($ht_cap_mask & ~(0x300)) | ($cap_rx_stbc << 8) ))"
 139
 140                 mac80211_add_capabilities ht_capab_flags $ht_cap_mask \
 141                         LDPC:0x1::$ldpc \
 142                         GF:0x10::$greenfield \
 143                         SHORT-GI-20:0x20::$short_gi_20 \
 144                         SHORT-GI-40:0x40::$short_gi_40 \
 145                         TX-STBC:0x80::$max_tx_stbc \
 146                         RX-STBC1:0x300:0x100:1 \
 147                         RX-STBC12:0x300:0x200:1 \
 148                         RX-STBC123:0x300:0x300:1 \
 149                         DSSS_CCK-40:0x1000::$dsss_cck_40
 150
 151                 [ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab$ht_capab_flags" "$N"
 152         }
 153
 154         # 802.11ac
 155         enable_ac=0
 156         idx="$channel"
 157         case "$htmode" in
 158                 VHT20) enable_ac=1;;
 159                 VHT40)
 160                         case "$(( ($channel / 4) % 2 ))" in
 161                                 1) idx=$(($channel + 2));;
 162                                 0) idx=$(($channel - 2));;
 163                         esac
 164                         enable_ac=1
 165                         append base_cfg "vht_oper_chwidth=0" "$N"
 166                         append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
 167                 ;;
 168                 VHT80)
 169                         case "$(( ($channel / 4) % 4 ))" in
 170                                 1) idx=$(($channel + 6));;
 171                                 2) idx=$(($channel + 2));;
 172                                 3) idx=$(($channel - 2));;
 173                                 0) idx=$(($channel - 6));;
 174                         esac
 175                         enable_ac=1
 176                         append base_cfg "vht_oper_chwidth=1" "$N"
 177                         append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
 178                 ;;
 179                 VHT160)
 180                         case "$channel" in
 181                                 36|40|44|48|52|56|60|64) idx=50;;
 182                                 100|104|108|112|116|120|124|128) idx=114;;
 183                         esac
 184                         enable_ac=1
 185                         append base_cfg "vht_oper_chwidth=2" "$N"
 186                         append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
 187                 ;;
 188         esac
 189
 190         if [ "$enable_ac" != "0" ]; then
 191                 json_get_vars \
 192                         rxldpc:1 \
 193                         short_gi_80:1 \
 194                         short_gi_160:1 \
 195                         tx_stbc_2by1:1 \
 196                         su_beamformer:1 \
 197                         su_beamformee:1 \
 198                         mu_beamformer:1 \
 199                         mu_beamformee:1 \
 200                         vht_txop_ps:1 \
 201                         htc_vht:1 \
 202                         rx_antenna_pattern:1 \
 203                         tx_antenna_pattern:1 \
 204                         vht_max_mpdu:11454 \
 205                         rx_stbc:4 \
 206                         vht_link_adapt:3 \
 207                         vht160:2
 208
 209                 append base_cfg "ieee80211ac=1" "$N"
 210                 vht_cap=0
 211                 for cap in $(iw phy "$phy" info | awk -F "[()]" '/VHT Capabilities/ { print $2 }'); do
 212                         vht_cap="$(($vht_cap | $cap))"
 213                 done
 214
 215                 cap_rx_stbc=$((($vht_cap >> 8) & 7))
 216                 [ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
 217                 ht_cap_mask="$(( ($vht_cap & ~(0x700)) | ($cap_rx_stbc << 8) ))"
 218
 219                 mac80211_add_capabilities vht_capab $vht_cap \
 220                         RXLDPC:0x10::$rxldpc \
 221                         SHORT-GI-80:0x20::$short_gi_80 \
 222                         SHORT-GI-160:0x40::$short_gi_160 \
 223                         TX-STBC-2BY1:0x80::$tx_stbc \
 224                         SU-BEAMFORMER:0x800::$su_beamformer \
 225                         SU-BEAMFORMEE:0x1000::$su_beamformee \
 226                         MU-BEAMFORMER:0x80000::$mu_beamformer \
 227                         MU-BEAMFORMEE:0x100000::$mu_beamformee \
 228                         VHT-TXOP-PS:0x200000::$vht_txop_ps \
 229                         HTC-VHT:0x400000::$htc_vht \
 230                         RX-ANTENNA-PATTERN:0x10000000::$rx_antenna_pattern \
 231                         TX-ANTENNA-PATTERN:0x20000000::$tx_antenna_pattern \
 232                         RX-STBC1:0x700:0x100:1 \
 233                         RX-STBC12:0x700:0x200:1 \
 234                         RX-STBC123:0x700:0x300:1 \
 235                         RX-STBC1234:0x700:0x400:1 \
 236
 237                 # supported Channel widths
 238                 vht160_hw=0
 239                 [ "$(($vht_cap & 12))" -eq 4 -a 1 -le "$vht160" ] && \
 240                         vht160_hw=1
 241                 [ "$(($vht_cap & 12))" -eq 8 -a 2 -le "$vht160" ] && \
 242                         vht160_hw=2
 243                 [ "$vht160_hw" = 1 ] && vht_capab="$vht_capab[VHT160]"
 244                 [ "$vht160_hw" = 2 ] && vht_capab="$vht_capab[VHT160-80PLUS80]"
 245
 246                 # maximum MPDU length
 247                 vht_max_mpdu_hw=3895
 248                 [ "$(($vht_cap & 3))" -ge 1 -a 7991 -le "$vht_max_mpdu" ] && \
 249                         vht_max_mpdu_hw=7991
 250                 [ "$(($vht_cap & 3))" -ge 2 -a 11454 -le "$vht_max_mpdu" ] && \
 251                         vht_max_mpdu_hw=11454
 252                 [ "$vht_max_mpdu_hw" != 3895 ] && \
 253                         vht_capab="$vht_capab[MAX-MPDU-$vht_max_mpdu_hw]"
 254
 255                 # whether or not the STA supports link adaptation using VHT variant
 256                 vht_link_adapt_hw=0
 257                 [ "$(($vht_cap & 201326592))" -ge 134217728 -a 2 -le "$vht_link_adapt" ] && \
 258                         vht_link_adapt_hw=2
 259                 [ "$(($vht_cap & 201326592))" -ge 201326592 -a 3 -le "$vht_link_adapt" ] && \
 260                         vht_link_adapt_hw=3
 261                 [ "$vht_link_adapt_hw" != 0 ] && \
 262                         vht_capab="$vht_capab[VHT-LINK-ADAPT-$vht_link_adapt_hw]"
 263
 264                 [ -n "$vht_capab" ] && append base_cfg "vht_capab=$vht_capab" "$N"
 265         fi
 266
 267         hostapd_prepare_device_config "$hostapd_conf_file" nl80211
 268         cat >> "$hostapd_conf_file" <<EOF
 269 ${channel:+channel=$channel}
 270 ${noscan:+noscan=$noscan}
 271 $base_cfg
 272
 273 EOF
 274         json_select ..
 275 }
 276
 277 mac80211_hostapd_setup_bss() {
 278         local phy="$1"
 279         local ifname="$2"
 280         local macaddr="$3"
 281         local type="$4"
 282
 283         hostapd_cfg=
 284         append hostapd_cfg "$type=$ifname" "$N"
 285
 286         hostapd_set_bss_options hostapd_cfg "$vif" || return 1
 287         json_get_vars wds dtim_period max_listen_int
 288
 289         set_default wds 0
 290
 291         [ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"
 292         [ "$staidx" -gt 0 ] && append hostapd_cfg "start_disabled=1" "$N"
 293
 294         cat >> /var/run/hostapd-$phy.conf <<EOF
 295 $hostapd_cfg
 296 bssid=$macaddr
 297 ${dtim_period:+dtim_period=$dtim_period}
 298 ${max_listen_int:+max_listen_interval=$max_listen_int}
 299 EOF
 300 }
 301
 302 mac80211_generate_mac() {
 303         local phy="$1"
 304         local id="${macidx:-0}"
 305
 306         local ref="$(cat /sys/class/ieee80211/${phy}/macaddress)"
 307         local mask="$(cat /sys/class/ieee80211/${phy}/address_mask)"
 308
 309         [ "$mask" = "00:00:00:00:00:00" ] && mask="ff:ff:ff:ff:ff:ff";
 310         local oIFS="$IFS"; IFS=":"; set -- $mask; IFS="$oIFS"
 311
 312         local mask1=$1
 313         local mask6=$6
 314
 315         local oIFS="$IFS"; IFS=":"; set -- $ref; IFS="$oIFS"
 316
 317         macidx=$(($id + 1))
 318         [ "$((0x$mask1))" -gt 0 ] && {
 319                 b1="0x$1"
 320                 [ "$id" -gt 0 ] && \
 321                         b1=$(($b1 ^ ((($id - 1) << 2) | 0x2)))
 322                 printf "%02x:%s:%s:%s:%s:%s" $b1 $2 $3 $4 $5 $6
 323                 return
 324         }
 325
 326         [ "$((0x$mask6))" -lt 255 ] && {
 327                 printf "%s:%s:%s:%s:%s:%02x" $1 $2 $3 $4 $5 $(( 0x$6 ^ $id ))
 328                 return
 329         }
 330
 331         off2=$(( (0x$6 + $id) / 0x100 ))
 332         printf "%s:%s:%s:%s:%02x:%02x" \
 333                 $1 $2 $3 $4 \
 334                 $(( (0x$5 + $off2) % 0x100 )) \
 335                 $(( (0x$6 + $id) % 0x100 ))
 336 }
 337
 338 find_phy() {
 339         [ -n "$phy" -a -d /sys/class/ieee80211/$phy ] && return 0
 340         [ -n "$path" -a -d "/sys/devices/$path/ieee80211" ] && {
 341                 phy="$(ls /sys/devices/$path/ieee80211 | grep -m 1 phy)"
 342                 [ -n "$phy" ] && return 0
 343         }
 344         [ -n "$macaddr" ] && {
 345                 for phy in $(ls /sys/class/ieee80211 2>/dev/null); do
 346                         grep -i -q "$macaddr" "/sys/class/ieee80211/${phy}/macaddress" && return 0
 347                 done
 348         }
 349         return 1
 350 }
 351
 352 mac80211_check_ap() {
 353         has_ap=1
 354 }
 355
 356 mac80211_prepare_vif() {
 357         json_select config
 358
 359         json_get_vars ifname mode ssid wds powersave macaddr
 360
 361         [ -n "$ifname" ] || ifname="wlan${phy#phy}${if_idx:+-$if_idx}"
 362         if_idx=$((${if_idx:-0} + 1))
 363
 364         set_default wds 0
 365         set_default powersave 0
 366
 367         json_select ..
 368
 369         [ -n "$macaddr" ] || {
 370                 macaddr="$(mac80211_generate_mac $phy)"
 371                 macidx="$(($macidx + 1))"
 372         }
 373
 374         json_add_object data
 375         json_add_string ifname "$ifname"
 376         json_close_object
 377         json_select config
 378
 379         # It is far easier to delete and create the desired interface
 380         case "$mode" in
 381                 adhoc)
 382                         iw phy "$phy" interface add "$ifname" type adhoc
 383                 ;;
 384                 ap)
 385                         # Hostapd will handle recreating the interface and
 386                         # subsequent virtual APs belonging to the same PHY
 387                         if [ -n "$hostapd_ctrl" ]; then
 388                                 type=bss
 389                         else
 390                                 type=interface
 391                         fi
 392
 393                         mac80211_hostapd_setup_bss "$phy" "$ifname" "$macaddr" "$type" || return
 394
 395                         [ -n "$hostapd_ctrl" ] || {
 396                                 iw phy "$phy" interface add "$ifname" type managed
 397                                 hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd/$ifname}"
 398                         }
 399                 ;;
 400                 mesh)
 401                         json_get_vars key mesh_id
 402                         if [ -n "$key" ]; then
 403                                 iw phy "$phy" interface add "$ifname" type mp
 404                         else
 405                                 iw phy "$phy" interface add "$ifname" type mp mesh_id "$mesh_id"
 406                         fi
 407                 ;;
 408                 monitor)
 409                         iw phy "$phy" interface add "$ifname" type monitor
 410                 ;;
 411                 sta)
 412                         local wdsflag=
 413                         staidx="$(($staidx + 1))"
 414                         [ "$wds" -gt 0 ] && wdsflag="4addr on"
 415                         iw phy "$phy" interface add "$ifname" type managed $wdsflag
 416                         [ "$powersave" -gt 0 ] && powersave="on" || powersave="off"
 417                         iw "$ifname" set power_save "$powersave"
 418                 ;;
 419         esac
 420
 421         case "$mode" in
 422                 monitor|mesh)
 423                         [ "$auto_channel" -gt 0 ] || iw dev "$ifname" set channel "$channel" $htmode
 424                 ;;
 425         esac
 426
 427         if [ "$mode" != "ap" ]; then
 428                 # ALL ap functionality will be passed to hostapd
 429                 # All interfaces must have unique mac addresses
 430                 # which can either be explicitly set in the device
 431                 # section, or automatically generated
 432                 ifconfig "$ifname" hw ether "$macaddr"
 433         fi
 434
 435         json_select ..
 436 }
 437
 438 mac80211_setup_supplicant() {
 439         wpa_supplicant_prepare_interface "$ifname" nl80211 || return 1
 440         wpa_supplicant_add_network "$ifname"
 441         wpa_supplicant_run "$ifname" ${hostapd_ctrl:+-H $hostapd_ctrl}
 442 }
 443
 444 mac80211_setup_adhoc() {
 445         json_get_vars bssid ssid key mcast_rate
 446
 447         keyspec=
 448         [ "$auth_type" == "wep" ] && {
 449                 set_default key 1
 450                 case "$key" in
 451                         [1234])
 452                                 local idx
 453                                 for idx in 1 2 3 4; do
 454                                         json_get_var ikey "key$idx"
 455
 456                                         [ -n "$ikey" ] && {
 457                                                 ikey="$(($idx - 1)):$(prepare_key_wep "$ikey")"
 458                                                 [ $idx -eq $key ] && ikey="d:$ikey"
 459                                                 append keyspec "$ikey"
 460                                         }
 461                                 done
 462                         ;;
 463                         *)
 464                                 append keyspec "d:0:$(prepare_key_wep "$key")"
 465                         ;;
 466                 esac
 467         }
 468
 469         brstr=
 470         for br in $basic_rate_list; do
 471                 hostapd_add_rate brstr "$br"
 472         done
 473
 474         mcval=
 475         [ -n "$mcast_rate" ] && hostapd_add_rate mcval "$mcast_rate"
 476
 477         iw dev "$ifname" ibss join "$ssid" $freq $htmode fixed-freq $bssid \
 478                 ${beacon_int:+beacon-interval $beacon_int} \
 479                 ${brstr:+basic-rates $brstr} \
 480                 ${mcval:+mcast-rate $mcval} \
 481                 ${keyspec:+keys $keyspec}
 482 }
 483
 484 mac80211_setup_vif() {
 485         local name="$1"
 486         local failed
 487
 488         json_select data
 489         json_get_vars ifname
 490         json_select ..
 491
 492         json_select config
 493         json_get_vars mode
 494         json_get_var vif_txpower txpower
 495
 496         ifconfig "$ifname" up || {
 497                 wireless_setup_vif_failed IFUP_ERROR
 498                 json_select ..
 499                 return
 500         }
 501
 502         set_default vif_txpower "$txpower"
 503         [ -z "$vif_txpower" ] || iw dev "$ifname" set txpower fixed "${vif_txpower%%.*}00"
 504
 505         case "$mode" in
 506                 mesh)
 507                         for var in $MP_CONFIG_INT $MP_CONFIG_BOOL $MP_CONFIG_STRING; do
 508                                 json_get_var mp_val "$var"
 509                                 [ -n "$mp_val" ] && iw dev "$ifname" set mesh_param "$var" "$mp_val"
 510                         done
 511
 512                         # authsae
 513                         json_get_vars key
 514                         if [ -n "$key" ]; then
 515                                 if [ -e "/lib/wifi/authsae.sh" ]; then
 516                                         . /lib/wifi/authsae.sh
 517                                         authsae_start_interface || failed=1
 518                                 else
 519                                         wireless_setup_vif_failed AUTHSAE_NOT_INSTALLED
 520                                         json_select ..
 521                                         return
 522                                 fi
 523                         fi
 524                 ;;
 525                 adhoc)
 526                         wireless_vif_parse_encryption
 527                         if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ]; then
 528                                 mac80211_setup_supplicant || failed=1
 529                         else
 530                                 mac80211_setup_adhoc
 531                         fi
 532                 ;;
 533                 sta)
 534                         mac80211_setup_supplicant || failed=1
 535                 ;;
 536         esac
 537
 538         json_select ..
 539         [ -n "$failed" ] || wireless_add_vif "$name" "$ifname"
 540 }
 541
 542 get_freq() {
 543         local phy="$1"
 544         local chan="$2"
 545         iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep MHz | awk '{print $2}'
 546 }
 547
 548 mac80211_interface_cleanup() {
 549         local phy="$1"
 550
 551         for wdev in $(list_phy_interfaces "$phy"); do
 552                 ifconfig "$wdev" down 2>/dev/null
 553                 iw dev "$wdev" del
 554         done
 555 }
 556
 557 drv_mac80211_cleanup() {
 558         hostapd_common_cleanup
 559 }
 560
 561 drv_mac80211_setup() {
 562         json_select config
 563         json_get_vars \
 564                 phy macaddr path \
 565                 country chanbw distance \
 566                 txpower antenna_gain \
 567                 rxantenna txantenna \
 568                 frag rts beacon_int
 569         json_get_values basic_rate_list basic_rate
 570         json_select ..
 571
 572         find_phy || {
 573                 echo "Could not find PHY for device '$1'"
 574                 wireless_set_retry 0
 575                 return 1
 576         }
 577
 578         wireless_set_data phy="$phy"
 579         mac80211_interface_cleanup "$phy"
 580
 581         # convert channel to frequency
 582         [ "$auto_channel" -gt 0 ] || freq="$(get_freq "$phy" "$channel")"
 583
 584         [ -n "$country" ] && {
 585                 iw reg get | grep -q "^country $country:" || {
 586                         iw reg set "$country"
 587                         sleep 1
 588                 }
 589         }
 590
 591         hostapd_conf_file="/var/run/hostapd-$phy.conf"
 592
 593         no_ap=1
 594         macidx=0
 595         staidx=0
 596
 597         [ -n "$chanbw" ] && {
 598                 for file in /sys/kernel/debug/ieee80211/$phy/ath9k/chanbw /sys/kernel/debug/ieee80211/$phy/ath5k/bwmode; do
 599                         [ -f "$file" ] && echo "$chanbw" > "$file"
 600                 done
 601         }
 602
 603         set_default rxantenna all
 604         set_default txantenna all
 605         set_default distance 0
 606         set_default antenna_gain 0
 607
 608         iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1
 609         iw phy "$phy" set antenna_gain $antenna_gain
 610         iw phy "$phy" set distance "$distance"
 611
 612         [ -n "$frag" ] && iw phy "$phy" set frag "${frag%%.*}"
 613         [ -n "$rts" ] && iw phy "$phy" set rts "${rts%%.*}"
 614
 615         has_ap=
 616         hostapd_ctrl=
 617         for_each_interface "ap" mac80211_check_ap
 618
 619         rm -f "$hostapd_conf_file"
 620         [ -n "$has_ap" ] && mac80211_hostapd_setup_base "$phy"
 621
 622         for_each_interface "sta adhoc mesh monitor" mac80211_prepare_vif
 623         for_each_interface "ap" mac80211_prepare_vif
 624
 625         [ -n "$hostapd_ctrl" ] && {
 626                 /usr/sbin/hostapd -P /var/run/wifi-$phy.pid -B "$hostapd_conf_file"
 627                 ret="$?"
 628                 wireless_add_process "$(cat /var/run/wifi-$phy.pid)" "/usr/sbin/hostapd" 1
 629                 [ "$ret" != 0 ] && {
 630                         wireless_setup_failed HOSTAPD_START_FAILED
 631                         return
 632                 }
 633         }
 634
 635         for_each_interface "ap sta adhoc mesh monitor" mac80211_setup_vif
 636
 637         wireless_set_up
 638 }
 639
 640 list_phy_interfaces() {
 641         local phy="$1"
 642         if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
 643                 ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null;
 644         else
 645                 ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g'
 646         fi
 647 }
 648
 649 drv_mac80211_teardown() {
 650         wireless_process_kill_all
 651
 652         json_select data
 653         json_get_vars phy
 654         json_select ..
 655
 656         mac80211_interface_cleanup "$phy"
 657 }
 658
 659 add_driver mac80211