package/kernel/mac80211/patches/323-0000-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch

   1 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
   2 Date: Wed, 20 Jan 2016 16:46:04 +0100
   3 Subject: [PATCH] brcmfmac: fix setting primary channel for 80 MHz width
   4 MIME-Version: 1.0
   5 Content-Type: text/plain; charset=UTF-8
   6 Content-Transfer-Encoding: 8bit
   7
   8 First of all it changes the way we calculate primary channel offset. If
   9 we use e.g. 80 MHz channel with primary frequency 5180 MHz (which means
  10 center frequency is 5210 MHz) it makes sense to calculate primary offset
  11 as -30 MHz.
  12 Then it fixes values we compare primary_offset with. We were comparing
  13 offset in MHz against -2 or 2 which was resulting in picking a wrong
  14 primary channel.
  15
  16 Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  17 Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
  18 ---
  19
  20 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
  21 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
  22 @@ -247,7 +247,7 @@ static u16 chandef_to_chanspec(struct br
  23         brcmf_dbg(TRACE, "chandef: control %d center %d width %d\n",
  24                   ch->chan->center_freq, ch->center_freq1, ch->width);
  25         ch_inf.chnum = ieee80211_frequency_to_channel(ch->center_freq1);
  26 -       primary_offset = ch->center_freq1 - ch->chan->center_freq;
  27 +       primary_offset = ch->chan->center_freq - ch->center_freq1;
  28         switch (ch->width) {
  29         case NL80211_CHAN_WIDTH_20:
  30         case NL80211_CHAN_WIDTH_20_NOHT:
  31 @@ -256,24 +256,21 @@ static u16 chandef_to_chanspec(struct br
  32                 break;
  33         case NL80211_CHAN_WIDTH_40:
  34                 ch_inf.bw = BRCMU_CHAN_BW_40;
  35 -               if (primary_offset < 0)
  36 +               if (primary_offset > 0)
  37                         ch_inf.sb = BRCMU_CHAN_SB_U;
  38                 else
  39                         ch_inf.sb = BRCMU_CHAN_SB_L;
  40                 break;
  41         case NL80211_CHAN_WIDTH_80:
  42                 ch_inf.bw = BRCMU_CHAN_BW_80;
  43 -               if (primary_offset < 0) {
  44 -                       if (primary_offset < -CH_10MHZ_APART)
  45 -                               ch_inf.sb = BRCMU_CHAN_SB_UU;
  46 -                       else
  47 -                               ch_inf.sb = BRCMU_CHAN_SB_UL;
  48 -               } else {
  49 -                       if (primary_offset > CH_10MHZ_APART)
  50 -                               ch_inf.sb = BRCMU_CHAN_SB_LL;
  51 -                       else
  52 -                               ch_inf.sb = BRCMU_CHAN_SB_LU;
  53 -               }
  54 +               if (primary_offset == -30)
  55 +                       ch_inf.sb = BRCMU_CHAN_SB_LL;
  56 +               else if (primary_offset == -10)
  57 +                       ch_inf.sb = BRCMU_CHAN_SB_LU;
  58 +               else if (primary_offset == 10)
  59 +                       ch_inf.sb = BRCMU_CHAN_SB_UL;
  60 +               else
  61 +                       ch_inf.sb = BRCMU_CHAN_SB_UU;
  62                 break;
  63         case NL80211_CHAN_WIDTH_80P80:
  64         case NL80211_CHAN_WIDTH_160: