72c72cd2fa28fc2b22e733cf4dd2cdd48f69f4f7
[openwrt/svn-archive/archive.git] / package / mac80211 / patches-old / 001-disable_drivers.patch
1 --- compat-wireless-2008-08-06/config.mk 2008-07-18 06:11:03.000000000 +0200
2 +++ compat-wireless-2008-08-06.new/config.mk 2008-11-28 21:10:31.000000000 +0100
3 @@ -72,70 +72,34 @@
4 CONFIG_ATH5K=m
5 CONFIG_ATH5K_DEBUG=n
6
7 -# Required for older kernels which still use this flag.
8 -CONFIG_IWLWIFI=m
9 -
10 -CONFIG_IWLCORE=m
11 -CONFIG_IWL3945=m
12 -CONFIG_IWL4965=m
13 -CONFIG_IWL4965_HT=y
14 -CONFIG_B43=m
15 +# CONFIG_B43=m
16 +CONFIG_B43_NPHY=y
17 # B43 uses PCMCIA only for Compact Flash. The Cardbus cards uses PCI
18 # Example, bcm4318:
19 # http://www.multicap.biz/wireless-lan/indoor-wlan-hardware/sdc-cf10g-80211g-compact-flash-module
20 -CONFIG_B43_PCMCIA=y
21 +# CONFIG_B43_PCMCIA=y
22 CONFIG_B43_DMA=y
23 -CONFIG_B43_PIO=y
24 +# CONFIG_B43_PIO=y
25 # B43_PIO selects SSB_BLOCKIO
26 -CONFIG_SSB_BLOCKIO=y
27 -CONFIG_B43_DMA_AND_PIO_MODE=y
28 -CONFIG_B43_PCI_AUTOSELECT=y
29 -CONFIG_B43_PCICORE_AUTOSELECT=y
30 -#CONFIG_B43_RFKILL=n
31 -CONFIG_B43_LEDS=y
32 +# CONFIG_SSB_BLOCKIO=y
33 +# CONFIG_B43_DMA_AND_PIO_MODE=y
34 +# CONFIG_B43_PCI_AUTOSELECT=y
35 +# CONFIG_B43_PCICORE_AUTOSELECT=y
36 +# CONFIG_B43_RFKILL=y
37 +# CONFIG_B43_LEDS=y
38 # CONFIG_B43_DEBUG is not set
39
40 -CONFIG_B43LEGACY=m
41 -CONFIG_B43LEGACY_PCI_AUTOSELECT=y
42 -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
43 +# CONFIG_B43LEGACY=m
44 +# CONFIG_B43LEGACY_RFKILL=y
45 +# CONFIG_B43LEGACY_LEDS=y
46 +# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
47 +# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
48 CONFIG_B43LEGACY_DMA=y
49 -CONFIG_B43LEGACY_PIO=y
50 -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
51 -
52 -# The Intel ipws
53 -CONFIG_IPW2100=m
54 -CONFIG_IPW2100_MONITOR=y
55 -CONFIG_IPW2200=m
56 -CONFIG_IPW2200_MONITOR=y
57 -CONFIG_IPW2200_RADIOTAP=y
58 -CONFIG_IPW2200_PROMISCUOUS=y
59 -# The above enables use a second interface prefixed 'rtap'.
60 -# Example usage:
61 -#
62 -# % modprobe ipw2200 rtap_iface=1
63 -# % ifconfig rtap0 up
64 -# % tethereal -i rtap0
65 -#
66 -# If you do not specify 'rtap_iface=1' as a module parameter then
67 -# the rtap interface will not be created and you will need to turn
68 -# it on via sysfs:
69 -#
70 -# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
71 -CONFIG_IPW2200_QOS=y
72 -
73 -NEED_IEEE80211=y
74 +# CONFIG_B43LEGACY_PIO=y
75 +# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
76
77 CONFIG_P54_PCI=m
78
79 -CONFIG_SSB_PCIHOST_POSSIBLE=y
80 -CONFIG_SSB_PCIHOST=y
81 -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
82 -CONFIG_SSB_DRIVER_PCICORE=y
83 -CONFIG_SSB_B43_PCI_BRIDGE=y
84 -
85 -CONFIG_RTL8180=m
86 -CONFIG_ADM8211=m
87 -
88 CONFIG_RT2X00_LIB_PCI=m
89 CONFIG_RT2400PCI=m
90 CONFIG_RT2500PCI=m
91 @@ -159,31 +123,7 @@
92 ifneq ($(CONFIG_USB),)
93 CONFIG_ZD1211RW=m
94
95 -# support for USB Wireless devices using Atmel at76c503,
96 -# at76c505 or at76c505a chips.
97 -CONFIG_USB_ATMEL=m
98 -
99 -# Stuff here things which depend on kernel versions for USB
100 -ifeq ($(shell test -e $(KLIB_BUILD)/Makefile && echo yes),yes)
101 -KERNEL_SUBLEVEL = $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p')
102 -ifeq ($(shell test $(KERNEL_SUBLEVEL) -gt 21 && echo yes),yes)
103 -
104 -# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
105 -
106 -# Wireless RNDIS USB support (RTL8185 802.11g) A-Link WL54PC
107 -# All of these devices are based on Broadcom 4320 chip which
108 -# is only wireless RNDIS chip known to date.
109 -# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
110 -# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
111 -CONFIG_USB_NET_RNDIS_HOST=m
112 -CONFIG_USB_NET_RNDIS_WLAN=m
113 -CONFIG_USB_NET_CDCETHER=m
114 -
115 -endif
116 -endif
117 -
118 CONFIG_P54_USB=m
119 -CONFIG_RTL8187=m
120
121 # RT2500USB does not require firmware
122 CONFIG_RT2500USB=m
123 @@ -212,36 +152,6 @@
124 # p54
125 CONFIG_P54_COMMON=m
126
127 -# Sonics Silicon Backplane
128 -CONFIG_SSB_POSSIBLE=y
129 -CONFIG_SSB=m
130 -CONFIG_SSB_SPROM=y
131 -
132 -ifneq ($(CONFIG_PCMCIA),)
133 -CONFIG_SSB_PCMCIAHOST=y
134 -endif
135 -
136 -# These two are for mips
137 -CONFIG_SSB_DRIVER_MIPS=n
138 -CONFIG_SSB_PCICORE_HOSTMODE=n
139 -# CONFIG_SSB_DEBUG is not set
140 -# CONFIG_SSB_DRIVER_EXTIF=y
141 -
142 -ifneq ($(CONFIG_USB),)
143 -CONFIG_LIBERTAS_USB=m
144 -NEED_LIBERTAS=y
145 -endif
146 -ifneq ($(CONFIG_PCMCIA),)
147 -CONFIG_LIBERTAS_CS=m
148 -NEED_LIBERTAS=y
149 -endif
150 -ifeq ($(NEED_LIBERTAS),y)
151 -CONFIG_LIBERTAS=m
152 -# Libertas uses the old stack but not fully, it will soon
153 -# be cleaned.
154 -NEED_IEEE80211=y
155 -endif
156 -
157 ifeq ($(NEED_IEEE80211),y)
158 # Old ieee80211 "stack"
159 # Note: old softmac is scheduled for removal so we