package/mac80211/patches/007-remove_unused_stuff.patch

   1 --- a/config.mk
   2 +++ b/config.mk
   3 @@ -107,10 +107,10 @@ CONFIG_MAC80211_MESH=y
   4  CONFIG_CFG80211=m
   5  # CONFIG_CFG80211_REG_DEBUG=y
   6
   7 -CONFIG_LIB80211=m
   8 -CONFIG_LIB80211_CRYPT_WEP=m
   9 -CONFIG_LIB80211_CRYPT_CCMP=m
  10 -CONFIG_LIB80211_CRYPT_TKIP=m
  11 +# CONFIG_LIB80211=m
  12 +# CONFIG_LIB80211_CRYPT_WEP=m
  13 +# CONFIG_LIB80211_CRYPT_CCMP=m
  14 +# CONFIG_LIB80211_CRYPT_TKIP=m
  15  # CONFIG_LIB80211_DEBUG=y
  16
  17  CONFIG_WIRELESS_OLD_REGULATORY=n
  18 @@ -127,56 +127,56 @@ CONFIG_ATH9K=m
  19  # CONFIG_ATH9K_DEBUG=y
  20
  21
  22 -CONFIG_IWLWIFI=m
  23 -CONFIG_IWLWIFI_LEDS=y
  24 +# CONFIG_IWLWIFI=m
  25 +# CONFIG_IWLWIFI_LEDS=y
  26  # CONFIG_IWLWIFI_RFKILL=y
  27 -CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
  28 +# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
  29  # CONFIG_IWLWIFI_DEBUG=y
  30  # CONFIG_IWLWIFI_DEBUGFS=y
  31 -CONFIG_IWLAGN=m
  32 -CONFIG_IWL4965=y
  33 -CONFIG_IWL5000=y
  34 -CONFIG_IWL3945=m
  35 -CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
  36 +# CONFIG_IWLAGN=m
  37 +# CONFIG_IWL4965=y
  38 +# CONFIG_IWL5000=y
  39 +# CONFIG_IWL3945=m
  40 +# CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
  41
  42
  43 -CONFIG_B43=m
  44 -CONFIG_B43_HWRNG=y
  45 -CONFIG_B43_PCI_AUTOSELECT=y
  46 -CONFIG_B43_PCICORE_AUTOSELECT=y
  47 -CONFIG_B43_PCMCIA=y
  48 -CONFIG_B43_PIO=y
  49 -CONFIG_B43_LEDS=y
  50 +# CONFIG_B43=m
  51 +# CONFIG_B43_HWRNG=y
  52 +# CONFIG_B43_PCI_AUTOSELECT=y
  53 +# CONFIG_B43_PCICORE_AUTOSELECT=y
  54 +# CONFIG_B43_PCMCIA=y
  55 +# CONFIG_B43_PIO=y
  56 +# CONFIG_B43_LEDS=y
  57  # CONFIG_B43_RFKILL=y
  58  # CONFIG_B43_DEBUG=y
  59  # CONFIG_B43_FORCE_PIO=y
  60
  61 -CONFIG_B43LEGACY=m
  62 -CONFIG_B43LEGACY_HWRNG=y
  63 -CONFIG_B43LEGACY_PCI_AUTOSELECT=y
  64 -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
  65 -CONFIG_B43LEGACY_LEDS=y
  66 +# CONFIG_B43LEGACY=m
  67 +# CONFIG_B43LEGACY_HWRNG=y
  68 +# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
  69 +# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
  70 +# CONFIG_B43LEGACY_LEDS=y
  71  # CONFIG_B43LEGACY_RFKILL=y
  72  # CONFIG_B43LEGACY_DEBUG=y
  73  CONFIG_B43LEGACY_DMA=y
  74 -CONFIG_B43LEGACY_PIO=y
  75 -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
  76 -# CONFIG_B43LEGACY_DMA_MODE=y
  77 +# CONFIG_B43LEGACY_PIO=y
  78 +# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
  79 +CONFIG_B43LEGACY_DMA_MODE=y
  80  # CONFIG_B43LEGACY_PIO_MODE=y
  81
  82  # The Intel ipws
  83 -CONFIG_LIBIPW=m
  84 +# CONFIG_LIBIPW=m
  85  # CONFIG_LIBIPW_DEBUG=y
  86
  87
  88 -CONFIG_IPW2100=m
  89 -CONFIG_IPW2100_MONITOR=y
  90 +# CONFIG_IPW2100=m
  91 +# CONFIG_IPW2100_MONITOR=y
  92  # CONFIG_IPW2100_DEBUG=y
  93 -CONFIG_IPW2200=m
  94 -CONFIG_IPW2200_MONITOR=y
  95 -CONFIG_IPW2200_RADIOTAP=y
  96 -CONFIG_IPW2200_PROMISCUOUS=y
  97 -CONFIG_IPW2200_QOS=y
  98 +# CONFIG_IPW2200=m
  99 +# CONFIG_IPW2200_MONITOR=y
 100 +# CONFIG_IPW2200_RADIOTAP=y
 101 +# CONFIG_IPW2200_PROMISCUOUS=y
 102 +# CONFIG_IPW2200_QOS=y
 103  # CONFIG_IPW2200_DEBUG=y
 104  # The above enables use a second interface prefixed 'rtap'.
 105  #           Example usage:
 106 @@ -191,27 +191,27 @@ CONFIG_IPW2200_QOS=y
 107  #
 108  # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
 109
 110 -CONFIG_SSB_BLOCKIO=y
 111 -CONFIG_SSB_PCIHOST_POSSIBLE=y
 112 -CONFIG_SSB_PCIHOST=y
 113 -CONFIG_SSB_B43_PCI_BRIDGE=y
 114 -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 115 -CONFIG_SSB_PCMCIAHOST=y
 116 +# CONFIG_SSB_BLOCKIO=y
 117 +# CONFIG_SSB_PCIHOST_POSSIBLE=y
 118 +# CONFIG_SSB_PCIHOST=y
 119 +# CONFIG_SSB_B43_PCI_BRIDGE=y
 120 +# CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 121 +# CONFIG_SSB_PCMCIAHOST=y
 122  # CONFIG_SSB_DEBUG=y
 123 -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 124 -CONFIG_SSB_DRIVER_PCICORE=y
 125 +# CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 126 +# CONFIG_SSB_DRIVER_PCICORE=y
 127
 128  CONFIG_P54_PCI=m
 129
 130 -CONFIG_B44=m
 131 -CONFIG_B44_PCI_AUTOSELECT=y
 132 -CONFIG_B44_PCICORE_AUTOSELECT=y
 133 -CONFIG_B44_PCI=y
 134 +# CONFIG_B44=m
 135 +# CONFIG_B44_PCI_AUTOSELECT=y
 136 +# CONFIG_B44_PCICORE_AUTOSELECT=y
 137 +# CONFIG_B44_PCI=y
 138
 139  CONFIG_RTL8180=m
 140
 141 -CONFIG_ADM8211=m
 142 -CONFIG_PCMCIA_ATMEL=m
 143 +# CONFIG_ADM8211=m
 144 +# CONFIG_PCMCIA_ATMEL=m
 145
 146  CONFIG_RT2X00_LIB_PCI=m
 147  CONFIG_RT2400PCI=m
 148 @@ -227,24 +227,24 @@ CONFIG_RT61PCI=m
 149  NEED_RT2X00_FIRMWARE=y
 150  endif
 151
 152 -CONFIG_ATMEL=m
 153 -CONFIG_PCI_ATMEL=m
 154 +# CONFIG_ATMEL=m
 155 +# CONFIG_PCI_ATMEL=m
 156
 157 -CONFIG_MWL8K=m
 158 +# CONFIG_MWL8K=m
 159
 160  endif
 161  ## end of PCI
 162
 163  ifneq ($(CONFIG_PCMCIA),)
 164
 165 -CONFIG_LIBERTAS_CS=m
 166 -NEED_LIBERTAS=y
 167 +# CONFIG_LIBERTAS_CS=m
 168 +# NEED_LIBERTAS=y
 169
 170  endif
 171  ## end of PCMCIA
 172
 173  # This is required for some cards
 174 -CONFIG_EEPROM_93CX6=m
 175 +# CONFIG_EEPROM_93CX6=m
 176
 177  # USB Drivers
 178  ifneq ($(CONFIG_USB),)
 179 @@ -258,21 +258,21 @@ CONFIG_ZD1211RW=m
 180  # is only wireless RNDIS chip known to date.
 181  # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
 182  # it also requires new RNDIS_HOST and CDC_ETHER modules which we add
 183 -CONFIG_USB_NET_RNDIS_HOST=m
 184 -CONFIG_USB_NET_RNDIS_WLAN=m
 185 -CONFIG_USB_NET_CDCETHER=m
 186 +# CONFIG_USB_NET_RNDIS_HOST=m
 187 +# CONFIG_USB_NET_RNDIS_WLAN=m
 188 +# CONFIG_USB_NET_CDCETHER=m
 189
 190
 191  CONFIG_P54_USB=m
 192  CONFIG_RTL8187=m
 193
 194 -CONFIG_AT76C50X_USB=m
 195 +# CONFIG_AT76C50X_USB=m
 196
 197  # Activate AR9170 support only on kernel >= 2.6.29.
 198  # The needed USB poison feature was added in this kernel release.
 199  ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 29 && echo yes),yes)
 200 -CONFIG_AR9170_USB=m
 201 -CONFIG_AR9170_LEDS=y
 202 +# CONFIG_AR9170_USB=m
 203 +# CONFIG_AR9170_LEDS=y
 204  endif
 205
 206  # RT2500USB does not require firmware
 207 @@ -286,24 +286,24 @@ CONFIG_RT73USB=m
 208  NEED_RT2X00_FIRMWARE=y
 209  endif
 210
 211 -CONFIG_LIBERTAS_THINFIRM_USB=m
 212 -CONFIG_LIBERTAS_USB=m
 213 -NEED_LIBERTAS=y
 214 +# CONFIG_LIBERTAS_THINFIRM_USB=m
 215 +# CONFIG_LIBERTAS_USB=m
 216 +# NEED_LIBERTAS=y
 217
 218  endif # end of USB driver list
 219
 220  ifneq ($(CONFIG_SPI_MASTER),)
 221
 222 -CONFIG_WL12XX=m
 223 -CONFIG_LIBERTAS_SPI=m
 224 -NEED_LIBERTAS=y
 225 +# CONFIG_WL12XX=m
 226 +# CONFIG_LIBERTAS_SPI=m
 227 +# NEED_LIBERTAS=y
 228
 229  endif # end of SPI driver list
 230
 231  ifneq ($(CONFIG_MMC),)
 232
 233 -CONFIG_LIBERTAS_SDIO=m
 234 -NEED_LIBERTAS=y
 235 +# CONFIG_LIBERTAS_SDIO=m
 236 +# NEED_LIBERTAS=y
 237
 238  endif # end of SDIO driver list
 239
 240 @@ -333,13 +333,13 @@ CONFIG_ATH_COMMON=m
 241
 242
 243  # Sonics Silicon Backplane
 244 -CONFIG_SSB_POSSIBLE=y
 245 -CONFIG_SSB=m
 246 -CONFIG_SSB_SPROM=y
 247 +# CONFIG_SSB_POSSIBLE=y
 248 +# CONFIG_SSB=m
 249 +# CONFIG_SSB_SPROM=y
 250  # CONFIG_SSB_DEBUG=y
 251
 252  ifeq ($(NEED_LIBERTAS),y)
 253 -CONFIG_LIBERTAS_THINFIRM=m
 254 +# CONFIG_LIBERTAS_THINFIRM=m
 255  CONFIG_LIBERTAS=m
 256  # CONFIG_LIBERTAS_DEBUG=y
 257  endif