b43: More non-PCI fixes
[openwrt/svn-archive/archive.git] / package / mac80211 / patches / 007-remove_unused_stuff.patch
1 Index: compat-wireless-2009-03-13/config.mk
2 ===================================================================
3 --- compat-wireless-2009-03-13.orig/config.mk 2009-03-17 23:34:31.000000000 +0100
4 +++ compat-wireless-2009-03-13/config.mk 2009-03-17 23:40:08.000000000 +0100
5 @@ -91,10 +91,10 @@ CONFIG_MAC80211_MESH=y
6 CONFIG_CFG80211=m
7 # CONFIG_CFG80211_REG_DEBUG is not set
8
9 -CONFIG_LIB80211=m
10 -CONFIG_LIB80211_CRYPT_WEP=m
11 -CONFIG_LIB80211_CRYPT_CCMP=m
12 -CONFIG_LIB80211_CRYPT_TKIP=m
13 +# CONFIG_LIB80211=m
14 +# CONFIG_LIB80211_CRYPT_WEP=m
15 +# CONFIG_LIB80211_CRYPT_CCMP=m
16 +# CONFIG_LIB80211_CRYPT_TKIP=m
17
18 CONFIG_NL80211=y
19
20 @@ -129,18 +129,18 @@ CONFIG_IWL3945_LEDS=y
21
22
23 CONFIG_B43=m
24 -CONFIG_B43_PCI_AUTOSELECT=y
25 -CONFIG_B43_PCICORE_AUTOSELECT=y
26 -CONFIG_B43_PCMCIA=y
27 -CONFIG_B43_PIO=y
28 -CONFIG_B43_LEDS=y
29 +# CONFIG_B43_PCI_AUTOSELECT=y
30 +# CONFIG_B43_PCICORE_AUTOSELECT=y
31 +# CONFIG_B43_PCMCIA=y
32 +# CONFIG_B43_PIO=y
33 +# CONFIG_B43_LEDS=y
34 # CONFIG_B43_RFKILL=y
35 # CONFIG_B43_DEBUG is not set
36
37 CONFIG_B43LEGACY=m
38 CONFIG_B43LEGACY_PCI_AUTOSELECT=y
39 CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
40 -CONFIG_B43LEGACY_LEDS=y
41 +# CONFIG_B43LEGACY_LEDS=y
42 # CONFIG_B43LEGACY_RFKILL=y
43 # CONFIG_B43LEGACY_DEBUG=y
44 CONFIG_B43LEGACY_DMA=y
45 @@ -150,17 +150,17 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
46 # CONFIG_B43LEGACY_PIO_MODE is not set
47
48 # The Intel ipws
49 -CONFIG_LIBIPW=m
50 +# CONFIG_LIBIPW=m
51 # CONFIG_LIBIPW_DEBUG is not set
52
53 -CONFIG_IPW2100=m
54 -CONFIG_IPW2100_MONITOR=y
55 +# CONFIG_IPW2100=m
56 +# CONFIG_IPW2100_MONITOR=y
57 # CONFIG_IPW2100_DEBUG is not set
58 -CONFIG_IPW2200=m
59 -CONFIG_IPW2200_MONITOR=y
60 -CONFIG_IPW2200_RADIOTAP=y
61 -CONFIG_IPW2200_PROMISCUOUS=y
62 -CONFIG_IPW2200_QOS=y
63 +# CONFIG_IPW2200=m
64 +# CONFIG_IPW2200_MONITOR=y
65 +# CONFIG_IPW2200_RADIOTAP=y
66 +# CONFIG_IPW2200_PROMISCUOUS=y
67 +# CONFIG_IPW2200_QOS=y
68 # CONFIG_IPW2200_DEBUG is not set
69 # The above enables use a second interface prefixed 'rtap'.
70 # Example usage:
71 @@ -176,13 +176,13 @@ CONFIG_IPW2200_QOS=y
72 # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
73
74 CONFIG_SSB_BLOCKIO=y
75 -CONFIG_SSB_PCIHOST_POSSIBLE=y
76 -CONFIG_SSB_PCIHOST=y
77 +# CONFIG_SSB_PCIHOST_POSSIBLE=y
78 +# CONFIG_SSB_PCIHOST=y
79 CONFIG_SSB_B43_PCI_BRIDGE=y
80 -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
81 -CONFIG_SSB_PCMCIAHOST=y
82 -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
83 -CONFIG_SSB_DRIVER_PCICORE=y
84 +# CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
85 +# CONFIG_SSB_PCMCIAHOST=y
86 +# CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
87 +# CONFIG_SSB_DRIVER_PCICORE=y
88
89 CONFIG_P54_PCI=m
90
91 @@ -277,21 +277,21 @@ CONFIG_P54_COMMON=m
92 # Sonics Silicon Backplane
93 CONFIG_SSB_POSSIBLE=y
94 CONFIG_SSB=m
95 -CONFIG_SSB_SPROM=y
96 +# CONFIG_SSB_SPROM=y
97 # CONFIG_SSB_DEBUG is not set
98
99 ifneq ($(CONFIG_USB),)
100 ifneq ($(CONFIG_LIBERTAS_THINFIRM_USB),m)
101 CONFIG_LIBERTAS_USB=m
102 -NEED_LIBERTAS=y
103 +#NEED_LIBERTAS=y
104 endif
105 endif
106 ifneq ($(CONFIG_PCMCIA),)
107 CONFIG_LIBERTAS_CS=m
108 -NEED_LIBERTAS=y
109 +#NEED_LIBERTAS=y
110 endif
111 ifeq ($(NEED_LIBERTAS),y)
112 -CONFIG_LIBERTAS=m
113 +#CONFIG_LIBERTAS=m
114 # Libertas uses the old stack but not fully, it will soon
115 # be cleaned.
116 endif