madwifi: turn software based tsf merging on by default, get rid of some iwpriv errors...
[openwrt/svn-archive/archive.git] / package / madwifi / files / lib / wifi / madwifi.sh
1 #!/bin/sh
2 append DRIVERS "atheros"
3
4 scan_atheros() {
5 local device="$1"
6 local wds
7 local adhoc ahdemo sta ap monitor
8
9 config_get vifs "$device" vifs
10 for vif in $vifs; do
11
12 config_get ifname "$vif" ifname
13 config_set "$vif" ifname "${ifname:-ath}"
14
15 config_get mode "$vif" mode
16 case "$mode" in
17 adhoc|ahdemo|sta|ap|monitor)
18 append $mode "$vif"
19 ;;
20 wds)
21 config_get ssid "$vif" ssid
22 [ -z "$ssid" ] && continue
23
24 config_set "$vif" wds 1
25 config_set "$vif" mode sta
26 mode="sta"
27 addr="$ssid"
28 ${addr:+append $mode "$vif"}
29 ;;
30 *) echo "$device($vif): Invalid mode, ignored."; continue;;
31 esac
32 done
33
34 case "${adhoc:+1}:${sta:+1}:${ap:+1}" in
35 # valid mode combinations
36 1::) wds="";;
37 1::1);;
38 :1:1)config_set "$device" nosbeacon 1;; # AP+STA, can't use beacon timers for STA
39 :1:);;
40 ::1);;
41 ::);;
42 *) echo "$device: Invalid mode combination in config"; return 1;;
43 esac
44
45 config_set "$device" vifs "${sta:+$sta }${ap:+$ap }${adhoc:+$adhoc }${ahdemo:+$ahdemo }${wds:+$wds }${monitor:+$monitor}"
46 }
47
48
49 disable_atheros() (
50 local device="$1"
51
52 set_wifi_down "$device"
53
54 include /lib/network
55 cd /proc/sys/net
56 for dev in *; do
57 grep "$device" "$dev/%parent" >/dev/null 2>/dev/null && {
58 [ -f "/var/run/wifi-${dev}.pid" ] &&
59 kill "$(cat "/var/run/wifi-${dev}.pid")"
60 ifconfig "$dev" down
61 unbridge "$dev"
62 wlanconfig "$dev" destroy
63 }
64 done
65 return 0
66 )
67
68 enable_atheros() {
69 local device="$1"
70
71 config_get regdomain "$device" regdomain
72 [ -n "$regdomain" ] && echo "$regdomain" > /proc/sys/dev/$device/regdomain
73
74 config_get country "$device" country
75 [ -z "$country" ] && country="0"
76 echo "$country" > /proc/sys/dev/$device/countrycode
77
78 config_get_bool outdoor "$device" outdoor "0"
79 echo "$outdoor" > /proc/sys/dev/$device/outdoor
80
81 config_get channel "$device" channel
82 config_get vifs "$device" vifs
83 config_get txpower "$device" txpower
84
85 [ auto = "$channel" ] && channel=0
86
87 config_get_bool antdiv "$device" diversity
88 config_get antrx "$device" rxantenna
89 config_get anttx "$device" txantenna
90 config_get_bool softled "$device" softled 1
91
92 devname="$(cat /proc/sys/dev/$device/dev_name)"
93 antgpio=
94 case "$devname" in
95 NanoStation2) antgpio=7;;
96 NanoStation5) antgpio=1;;
97 esac
98 if [ -n "$antgpio" ]; then
99 softled=0
100 config_get antenna "$device" antenna
101 case "$antenna" in
102 external) antdiv=0; antrx=1; anttx=1 ;;
103 horizontal) antdiv=0; antrx=1; anttx=1 ;;
104 vertical) antdiv=0; antrx=2; anttx=2 ;;
105 auto) antdiv=1; antrx=0; anttx=0 ;;
106 esac
107
108 [ -x "$(which gpioctl 2>/dev/null)" ] || antenna=
109 case "$antenna" in
110 horizontal|vertical|auto)
111 gpioctl "dirout" "$antgpio" >/dev/null 2>&1
112 gpioctl "set" "$antgpio" >/dev/null 2>&1
113 ;;
114 external)
115 gpioctl "dirout" "$antgpio" >/dev/null 2>&1
116 gpioctl "clear" "$antgpio" >/dev/null 2>&1
117 ;;
118 esac
119 fi
120
121 [ -n "$antdiv" ] && sysctl -w dev."$device".diversity="$antdiv" >&-
122 [ -n "$antrx" ] && sysctl -w dev."$device".rxantenna="$antrx" >&-
123 [ -n "$anttx" ] && sysctl -w dev."$device".txantenna="$anttx" >&-
124 [ -n "$softled" ] && sysctl -w dev."$device".softled="$softled" >&-
125
126 config_get distance "$device" distance
127 [ -n "$distance" ] && sysctl -w dev."$device".distance="$distance" >&-
128
129 for vif in $vifs; do
130 local start_hostapd= vif_txpower= nosbeacon=
131 config_get ifname "$vif" ifname
132 config_get enc "$vif" encryption
133 config_get eap_type "$vif" eap_type
134 config_get mode "$vif" mode
135
136 case "$mode" in
137 sta) config_get_bool nosbeacon "$device" nosbeacon;;
138 adhoc) config_get_bool nosbeacon "$vif" sw_merge 1;;
139 esac
140
141 [ "$nosbeacon" = 1 ] || nosbeacon=""
142 ifname=$(wlanconfig "$ifname" create wlandev "$device" wlanmode "$mode" ${nosbeacon:+nosbeacon})
143 [ $? -ne 0 ] && {
144 echo "enable_atheros($device): Failed to set up $mode vif $ifname" >&2
145 continue
146 }
147 config_set "$vif" ifname "$ifname"
148
149 config_get hwmode "$device" hwmode
150 [ -z "$hwmode" ] && config_get hwmode "$device" mode
151
152 pureg=0
153 case "$hwmode" in
154 *b) hwmode=11b;;
155 *bg) hwmode=11g;;
156 *g) hwmode=11g; pureg=1;;
157 *gdt) hwmode=11gdt;;
158 *a) hwmode=11a;;
159 *adt) hwmode=11adt;;
160 *ast) hwmode=11ast;;
161 *fh) hwmode=fh;;
162 *) hwmode=auto;;
163 esac
164 iwpriv "$ifname" mode "$hwmode"
165 iwpriv "$ifname" pureg "$pureg"
166
167 iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null
168
169 config_get_bool hidden "$vif" hidden 0
170 iwpriv "$ifname" hide_ssid "$hidden"
171
172 config_get ff "$vif" ff
173 if [ -n "$ff" ]; then
174 iwpriv "$ifname" ff "$ff"
175 fi
176
177 config_get wds "$vif" wds
178 case "$wds" in
179 1|on|enabled) wds=1;;
180 *) wds=0;;
181 esac
182 iwpriv "$ifname" wds "$wds" >/dev/null 2>&1
183
184 [ "$mode" = ap -a "$wds" = 1 ] && {
185 config_get_bool wdssep "$vif" wdssep 1
186 [ -n "$wdssep" ] && iwpriv "$ifname" wdssep "$wdssep"
187 }
188
189 case "$enc" in
190 WEP|wep)
191 for idx in 1 2 3 4; do
192 config_get key "$vif" "key${idx}"
193 iwconfig "$ifname" enc "[$idx]" "${key:-off}"
194 done
195 config_get key "$vif" key
196 key="${key:-1}"
197 case "$key" in
198 [1234]) iwconfig "$ifname" enc "[$key]";;
199 *) iwconfig "$ifname" enc "$key";;
200 esac
201 ;;
202 psk*|wpa*)
203 start_hostapd=1
204 config_get key "$vif" key
205 ;;
206 esac
207
208 case "$mode" in
209 sta|adhoc|ahdemo)
210 config_get addr "$vif" bssid
211 [ -z "$addr" ] || {
212 iwconfig "$ifname" ap "$addr"
213 }
214 ;;
215 esac
216
217 config_get_bool bgscan "$vif" bgscan
218 [ -n "$bgscan" ] && iwpriv "$ifname" bgscan "$bgscan"
219
220 config_get rate "$vif" rate
221 [ -n "$rate" ] && iwconfig "$ifname" rate "${rate%%.*}"
222
223 config_get mcast_rate "$vif" mcast_rate
224 [ -n "$mcast_rate" ] && iwpriv "$ifname" mcast_rate "${mcast_rate%%.*}"
225
226 config_get frag "$vif" frag
227 [ -n "$frag" ] && iwconfig "$ifname" frag "${frag%%.*}"
228
229 config_get rts "$vif" rts
230 [ -n "$rts" ] && iwconfig "$ifname" rts "${rts%%.*}"
231
232 config_get_bool comp "$vif" compression 0
233 iwpriv "$ifname" compression "$comp" >/dev/null 2>&1
234
235 config_get_bool minrate "$vif" minrate
236 [ -n "$minrate" ] && iwpriv "$ifname" minrate "$minrate"
237
238 config_get_bool maxrate "$vif" maxrate
239 [ -n "$maxrate" ] && iwpriv "$ifname" maxrate "$maxrate"
240
241 config_get_bool burst "$vif" bursting
242 [ -n "$burst" ] && iwpriv "$ifname" burst "$burst"
243
244 config_get_bool wmm "$vif" wmm
245 [ -n "$wmm" ] && iwpriv "$ifname" wmm "$wmm"
246
247 config_get_bool xr "$vif" xr
248 [ -n "$xr" ] && iwpriv "$ifname" xr "$xr"
249
250 config_get_bool ar "$vif" ar
251 [ -n "$ar" ] && iwpriv "$ifname" ar "$ar"
252
253 config_get_bool beacon_power "$vif" beacon_power
254 [ -n "$beacon_power" ] && iwpriv "$ifname" beacon_pwr "$beacon_power"
255
256 config_get_bool doth "$vif" doth 0
257 [ -n "$doth" ] && iwpriv "$ifname" doth "$doth"
258
259 config_get_bool probereq "$vif" probereq
260 [ -n "$probereq" ] && iwpriv "$ifname" probereq "$probereq"
261
262 config_get maclist "$vif" maclist
263 [ -n "$maclist" ] && {
264 # flush MAC list
265 iwpriv "$ifname" maccmd 3
266 for mac in $maclist; do
267 iwpriv "$ifname" addmac "$mac"
268 done
269 }
270
271 config_get macpolicy "$vif" macpolicy
272 case "$macpolicy" in
273 allow)
274 iwpriv "$ifname" maccmd 1
275 ;;
276 deny)
277 iwpriv "$ifname" maccmd 2
278 ;;
279 *)
280 # default deny policy if mac list exists
281 [ -n "$maclist" ] && iwpriv "$ifname" maccmd 2
282 ;;
283 esac
284
285 ifconfig "$ifname" up
286
287 local net_cfg bridge
288 net_cfg="$(find_net_config "$vif")"
289 [ -z "$net_cfg" ] || {
290 bridge="$(bridge_interface "$net_cfg")"
291 config_set "$vif" bridge "$bridge"
292 start_net "$ifname" "$net_cfg"
293 }
294
295 config_get ssid "$vif" ssid
296 [ -n "$ssid" ] && {
297 iwconfig "$ifname" essid on
298 iwconfig "$ifname" essid "$ssid"
299 }
300
301 set_wifi_up "$vif" "$ifname"
302
303 # TXPower settings only work if device is up already
304 # while atheros hardware theoretically is capable of per-vif (even per-packet) txpower
305 # adjustment it does not work with the current atheros hal/madwifi driver
306
307 config_get vif_txpower "$vif" txpower
308 # use vif_txpower (from wifi-iface) instead of txpower (from wifi-device) if
309 # the latter doesn't exist
310 txpower="${txpower:-$vif_txpower}"
311 [ -z "$txpower" ] || iwconfig "$ifname" txpower "${txpower%%.*}"
312
313 case "$mode" in
314 ap)
315 config_get_bool isolate "$vif" isolate 0
316 iwpriv "$ifname" ap_bridge "$((isolate^1))"
317
318 if [ -n "$start_hostapd" ] && eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then
319 hostapd_setup_vif "$vif" madwifi || {
320 echo "enable_atheros($device): Failed to set up hostapd for interface $ifname" >&2
321 # make sure this wifi interface won't accidentally stay open without encryption
322 ifconfig "$ifname" down
323 wlanconfig "$ifname" destroy
324 continue
325 }
326 fi
327 ;;
328 wds|sta)
329 if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
330 wpa_supplicant_setup_vif "$vif" madwifi || {
331 echo "enable_atheros($device): Failed to set up wpa_supplicant for interface $ifname" >&2
332 ifconfig "$ifname" down
333 wlanconfig "$ifname" destroy
334 continue
335 }
336 fi
337 ;;
338 esac
339 done
340 }
341
342
343 detect_atheros() {
344 cd /proc/sys/dev
345 [ -d ath ] || return
346 for dev in $(ls -d wifi* 2>&-); do
347 config_get type "$dev" type
348 devname="$(cat /proc/sys/dev/$dev/dev_name)"
349 case "$devname" in
350 NanoStation*)
351 EXTRA_DEV="
352 # Ubiquiti NanoStation features
353 option antenna auto # (auto|horizontal|vertical|external)
354 "
355 ;;
356 esac
357 [ "$type" = atheros ] && continue
358 cat <<EOF
359 config wifi-device $dev
360 option type atheros
361 option channel auto
362 $EXTRA_DEV
363 # REMOVE THIS LINE TO ENABLE WIFI:
364 option disabled 1
365
366 config wifi-iface
367 option device $dev
368 option network lan
369 option mode ap
370 option ssid OpenWrt
371 option encryption none
372 EOF
373 done
374 }