package/network/utils/iw/patches/001-nl80211_h_sync.patch

   1 --- a/nl80211.h
   2 +++ b/nl80211.h
   3 @@ -565,6 +565,14 @@
   4   *     %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
   5   *     %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
   6   *
   7 + * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
   8 + *     its %NL80211_ATTR_WDEV identifier. It must have been created with
   9 + *     %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
  10 + *     P2P Device can be used for P2P operations, e.g. remain-on-channel and
  11 + *     public action frame TX.
  12 + * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
  13 + *     its %NL80211_ATTR_WDEV identifier.
  14 + *
  15   * @NL80211_CMD_MAX: highest used command number
  16   * @__NL80211_CMD_AFTER_LAST: internal use
  17   */
  18 @@ -708,6 +716,9 @@ enum nl80211_commands {
  19
  20         NL80211_CMD_CH_SWITCH_NOTIFY,
  21
  22 +       NL80211_CMD_START_P2P_DEVICE,
  23 +       NL80211_CMD_STOP_P2P_DEVICE,
  24 +
  25         /* add new commands above here */
  26
  27         /* used to define NL80211_CMD_MAX below */
  28 @@ -1506,6 +1517,8 @@ enum nl80211_attrs {
  29
  30         NL80211_ATTR_USER_REG_HINT_TYPE,
  31
  32 +       NL80211_ATTR_WIPHY_ANTENNA_GAIN,
  33 +
  34         /* add attributes here, update the policy in nl80211.c */
  35
  36         __NL80211_ATTR_AFTER_LAST,
  37 @@ -1575,6 +1588,10 @@ enum nl80211_attrs {
  38   * @NL80211_IFTYPE_MESH_POINT: mesh point
  39   * @NL80211_IFTYPE_P2P_CLIENT: P2P client
  40   * @NL80211_IFTYPE_P2P_GO: P2P group owner
  41 + * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
  42 + *     and therefore can't be created in the normal ways, use the
  43 + *     %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
  44 + *     commands to create and destroy one
  45   * @NL80211_IFTYPE_MAX: highest interface type number currently defined
  46   * @NUM_NL80211_IFTYPES: number of defined interface types
  47   *
  48 @@ -1593,6 +1610,7 @@ enum nl80211_iftype {
  49         NL80211_IFTYPE_MESH_POINT,
  50         NL80211_IFTYPE_P2P_CLIENT,
  51         NL80211_IFTYPE_P2P_GO,
  52 +       NL80211_IFTYPE_P2P_DEVICE,
  53
  54         /* keep last */
  55         NUM_NL80211_IFTYPES,
  56 @@ -1744,6 +1762,8 @@ enum nl80211_sta_bss_param {
  57   * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
  58   * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
  59   * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
  60 + * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
  61 + * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
  62   * @__NL80211_STA_INFO_AFTER_LAST: internal
  63   * @NL80211_STA_INFO_MAX: highest possible station info attribute
  64   */
  65 @@ -1768,6 +1788,8 @@ enum nl80211_sta_info {
  66         NL80211_STA_INFO_STA_FLAGS,
  67         NL80211_STA_INFO_BEACON_LOSS,
  68         NL80211_STA_INFO_T_OFFSET,
  69 +       NL80211_STA_INFO_CHAIN_SIGNAL,
  70 +       NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
  71
  72         /* keep last */
  73         __NL80211_STA_INFO_AFTER_LAST,
  74 @@ -2994,12 +3016,18 @@ enum nl80211_ap_sme_features {
  75   * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
  76   *     to work properly to suppport receiving regulatory hints from
  77   *     cellular base stations.
  78 + * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
  79 + *     P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
  80 + *     in the interface combinations, even when it's only used for scan
  81 + *     and remain-on-channel. This could be due to, for example, the
  82 + *     remain-on-channel implementation requiring a channel context.
  83   */
  84  enum nl80211_feature_flags {
  85 -       NL80211_FEATURE_SK_TX_STATUS    = 1 << 0,
  86 -       NL80211_FEATURE_HT_IBSS         = 1 << 1,
  87 -       NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
  88 -       NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
  89 +       NL80211_FEATURE_SK_TX_STATUS                    = 1 << 0,
  90 +       NL80211_FEATURE_HT_IBSS                         = 1 << 1,
  91 +       NL80211_FEATURE_INACTIVITY_TIMER                = 1 << 2,
  92 +       NL80211_FEATURE_CELL_BASE_REG_HINTS             = 1 << 3,
  93 +       NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL        = 1 << 4,
  94  };
  95
  96  /**