projects / openwrt / svn-archive / archive.git / blob
? search:


61d7e74e61aa1c4f9817d89da247f7a8add225ba
[openwrt/svn-archive/archive.git] / package / rt2x00 / src / rt2500pci.c
1 /*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21 /*
22 Module: rt2500pci
23 Abstract: rt2500pci device specific routines.
24 Supported chipsets: RT2560.
25 */
26
27 /*
28 * Set enviroment defines for rt2x00.h
29 */
30 #define DRV_NAME "rt2500pci"
31
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/version.h>
35 #include <linux/init.h>
36 #include <linux/pci.h>
37 #include <linux/dma-mapping.h>
38 #include <linux/delay.h>
39 #include <linux/etherdevice.h>
40 #include <linux/eeprom_93cx6.h>
41
42 #include <asm/io.h>
43
44 #include "rt2x00.h"
45 #include "rt2x00pci.h"
46 #include "rt2500pci.h"
47
48 /*
49 * Register access.
50 * All access to the CSR registers will go through the methods
51 * rt2x00pci_register_read and rt2x00pci_register_write.
52 * BBP and RF register require indirect register access,
53 * and use the CSR registers BBPCSR and RFCSR to achieve this.
54 * These indirect registers work with busy bits,
55 * and we will try maximal REGISTER_BUSY_COUNT times to access
56 * the register while taking a REGISTER_BUSY_DELAY us delay
57 * between each attampt. When the busy bit is still set at that time,
58 * the access attempt is considered to have failed,
59 * and we will print an error.
60 */
61 static u32 rt2500pci_bbp_check(const struct rt2x00_dev *rt2x00dev)
62 {
63 u32 reg;
64 unsigned int i;
65
66 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
67 rt2x00pci_register_read(rt2x00dev, BBPCSR, &reg);
68 if (!rt2x00_get_field32(reg, BBPCSR_BUSY))
69 break;
70 udelay(REGISTER_BUSY_DELAY);
71 }
72
73 return reg;
74 }
75
76 static void rt2500pci_bbp_write(const struct rt2x00_dev *rt2x00dev,
77 const u8 reg_id, const u8 value)
78 {
79 u32 reg;
80
81 /*
82 * Wait until the BBP becomes ready.
83 */
84 reg = rt2500pci_bbp_check(rt2x00dev);
85 if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
86 ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n");
87 return;
88 }
89
90 /*
91 * Write the data into the BBP.
92 */
93 reg = 0;
94 rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
95 rt2x00_set_field32(&reg, BBPCSR_REGNUM, reg_id);
96 rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
97 rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
98
99 rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
100 }
101
102 static void rt2500pci_bbp_read(const struct rt2x00_dev *rt2x00dev,
103 const u8 reg_id, u8 *value)
104 {
105 u32 reg;
106
107 /*
108 * Wait until the BBP becomes ready.
109 */
110 reg = rt2500pci_bbp_check(rt2x00dev);
111 if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
112 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
113 return;
114 }
115
116 /*
117 * Write the request into the BBP.
118 */
119 reg = 0;
120 rt2x00_set_field32(&reg, BBPCSR_REGNUM, reg_id);
121 rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
122 rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 0);
123
124 rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
125
126 /*
127 * Wait until the BBP becomes ready.
128 */
129 reg = rt2500pci_bbp_check(rt2x00dev);
130 if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
131 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
132 *value = 0xff;
133 return;
134 }
135
136 *value = rt2x00_get_field32(reg, BBPCSR_VALUE);
137 }
138
139 static void rt2500pci_rf_write(const struct rt2x00_dev *rt2x00dev,
140 const u32 value)
141 {
142 u32 reg;
143 unsigned int i;
144
145 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
146 rt2x00pci_register_read(rt2x00dev, RFCSR, &reg);
147 if (!rt2x00_get_field32(reg, RFCSR_BUSY))
148 goto rf_write;
149 udelay(REGISTER_BUSY_DELAY);
150 }
151
152 ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n");
153 return;
154
155 rf_write:
156 reg = 0;
157 rt2x00_set_field32(&reg, RFCSR_VALUE, value);
158 rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
159 rt2x00_set_field32(&reg, RFCSR_IF_SELECT, 0);
160 rt2x00_set_field32(&reg, RFCSR_BUSY, 1);
161
162 rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
163 }
164
165 static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
166 {
167 struct rt2x00_dev *rt2x00dev = eeprom->data;
168 u32 reg;
169
170 rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
171
172 eeprom->reg_data_in = !!rt2x00_get_field32(reg,
173 CSR21_EEPROM_DATA_IN);
174 eeprom->reg_data_out = !!rt2x00_get_field32(reg,
175 CSR21_EEPROM_DATA_OUT);
176 eeprom->reg_data_clock = !!rt2x00_get_field32(reg,
177 CSR21_EEPROM_DATA_CLOCK);
178 eeprom->reg_chip_select = !!rt2x00_get_field32(reg,
179 CSR21_EEPROM_CHIP_SELECT);
180 }
181
182 static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
183 {
184 struct rt2x00_dev *rt2x00dev = eeprom->data;
185 u32 reg = 0;
186
187 rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_IN,
188 !!eeprom->reg_data_in);
189 rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_OUT,
190 !!eeprom->reg_data_out);
191 rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_CLOCK,
192 !!eeprom->reg_data_clock);
193 rt2x00_set_field32(&reg, CSR21_EEPROM_CHIP_SELECT,
194 !!eeprom->reg_chip_select);
195
196 rt2x00pci_register_write(rt2x00dev, CSR21, reg);
197 }
198
199 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
200 #define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
201
202 static void rt2500pci_read_csr(struct rt2x00_dev *rt2x00dev,
203 const unsigned long word, void *data)
204 {
205 rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
206 }
207
208 static void rt2500pci_write_csr(struct rt2x00_dev *rt2x00dev,
209 const unsigned long word, void *data)
210 {
211 rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), *((u32*)data));
212 }
213
214 static void rt2500pci_read_eeprom(struct rt2x00_dev *rt2x00dev,
215 const unsigned long word, void *data)
216 {
217 rt2x00_eeprom_read(rt2x00dev, word, data);
218 }
219
220 static void rt2500pci_write_eeprom(struct rt2x00_dev *rt2x00dev,
221 const unsigned long word, void *data)
222 {
223 rt2x00_eeprom_write(rt2x00dev, word, *((u16*)data));
224 }
225
226 static void rt2500pci_read_bbp(struct rt2x00_dev *rt2x00dev,
227 const unsigned long word, void *data)
228 {
229 rt2500pci_bbp_read(rt2x00dev, word, data);
230 }
231
232 static void rt2500pci_write_bbp(struct rt2x00_dev *rt2x00dev,
233 const unsigned long word, void *data)
234 {
235 rt2500pci_bbp_write(rt2x00dev, word, *((u8*)data));
236 }
237
238 static const struct rt2x00debug rt2500pci_rt2x00debug = {
239 .owner = THIS_MODULE,
240 .reg_csr = {
241 .read = rt2500pci_read_csr,
242 .write = rt2500pci_write_csr,
243 .word_size = sizeof(u32),
244 .word_count = CSR_REG_SIZE / sizeof(u32),
245 },
246 .reg_eeprom = {
247 .read = rt2500pci_read_eeprom,
248 .write = rt2500pci_write_eeprom,
249 .word_size = sizeof(u16),
250 .word_count = EEPROM_SIZE / sizeof(u16),
251 },
252 .reg_bbp = {
253 .read = rt2500pci_read_bbp,
254 .write = rt2500pci_write_bbp,
255 .word_size = sizeof(u8),
256 .word_count = BBP_SIZE / sizeof(u8),
257 },
258 };
259 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
260
261 #ifdef CONFIG_RT2500PCI_RFKILL
262 static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
263 {
264 u32 reg;
265
266 rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
267 return rt2x00_get_field32(reg, GPIOCSR_BIT0);
268 }
269 #endif /* CONFIG_RT2400PCI_RFKILL */
270
271 /*
272 * Configuration handlers.
273 */
274 static void rt2500pci_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
275 {
276 u32 reg[2];
277
278 memset(&reg, 0, sizeof(reg));
279 memcpy(&reg, bssid, ETH_ALEN);
280
281 /*
282 * The BSSID is passed to us as an array of bytes,
283 * that array is little endian, so no need for byte ordering.
284 */
285 rt2x00pci_register_multiwrite(rt2x00dev, CSR5, &reg, sizeof(reg));
286 }
287
288 static void rt2500pci_config_promisc(struct rt2x00_dev *rt2x00dev,
289 const int promisc)
290 {
291 u32 reg;
292
293 rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
294 rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME, !promisc);
295 rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
296 }
297
298 static void rt2500pci_config_type(struct rt2x00_dev *rt2x00dev,
299 const int type)
300 {
301 u32 reg;
302
303 rt2x00pci_register_write(rt2x00dev, CSR14, 0);
304
305 /*
306 * Apply hardware packet filter.
307 */
308 rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
309
310 if (!is_monitor_present(&rt2x00dev->interface) &&
311 (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
312 rt2x00_set_field32(&reg, RXCSR0_DROP_TODS, 1);
313 else
314 rt2x00_set_field32(&reg, RXCSR0_DROP_TODS, 0);
315
316 rt2x00_set_field32(&reg, RXCSR0_DROP_CRC, 1);
317 if (is_monitor_present(&rt2x00dev->interface)) {
318 rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL, 0);
319 rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL, 0);
320 rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 0);
321 } else {
322 rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL, 1);
323 rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL, 1);
324 rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
325 }
326
327 rt2x00_set_field32(&reg, RXCSR0_DROP_MCAST, 0);
328 rt2x00_set_field32(&reg, RXCSR0_DROP_BCAST, 0);
329
330 rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
331
332 /*
333 * Enable beacon config
334 */
335 rt2x00pci_register_read(rt2x00dev, BCNCSR1, &reg);
336 rt2x00_set_field32(&reg, BCNCSR1_PRELOAD,
337 PREAMBLE + get_duration(IEEE80211_HEADER, 2));
338 rt2x00_set_field32(&reg, BCNCSR1_BEACON_CWMIN,
339 rt2x00_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON)
340 ->tx_params.cw_min);
341 rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg);
342
343 /*
344 * Enable synchronisation.
345 */
346 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
347 if (is_interface_present(&rt2x00dev->interface)) {
348 rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
349 rt2x00_set_field32(&reg, CSR14_TBCN, 1);
350 }
351
352 rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
353 if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
354 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 2);
355 else if (type == IEEE80211_IF_TYPE_STA)
356 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 1);
357 else if (is_monitor_present(&rt2x00dev->interface) &&
358 !is_interface_present(&rt2x00dev->interface))
359 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
360
361 rt2x00pci_register_write(rt2x00dev, CSR14, reg);
362 }
363
364 static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
365 const int value, const int channel, const int txpower)
366 {
367 u32 rf1 = rt2x00dev->rf1;
368 u32 rf2 = value;
369 u32 rf3 = rt2x00dev->rf3;
370 u32 rf4 = rt2x00dev->rf4;
371
372 if (rt2x00_rf(&rt2x00dev->chip, RF2525) ||
373 rt2x00_rf(&rt2x00dev->chip, RF2525E))
374 rf2 |= 0x00080000;
375
376 if (rt2x00_rf(&rt2x00dev->chip, RF2525E) && channel == 14)
377 rf4 |= 0x00000010;
378
379 if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
380 if (channel < 14) {
381 rf1 = 0x00022020;
382 rf4 = 0x00000a0b;
383 } else if (channel == 14) {
384 rf1 = 0x00022010;
385 rf4 = 0x00000a1b;
386 } else if (channel < 64) {
387 rf1 = 0x00022010;
388 rf4 = 0x00000a1f;
389 } else if (channel < 140) {
390 rf1 = 0x00022010;
391 rf4 = 0x00000a0f;
392 } else if (channel < 161) {
393 rf1 = 0x00022020;
394 rf4 = 0x00000a07;
395 }
396 }
397
398 /*
399 * Set TXpower.
400 */
401 rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
402
403 /*
404 * Switch on tuning bits.
405 * For RT2523 devices we do not need to update the R1 register.
406 */
407 if (!rt2x00_rf(&rt2x00dev->chip, RF2523))
408 rt2x00_set_field32(&rf1, RF1_TUNER, 1);
409 rt2x00_set_field32(&rf3, RF3_TUNER, 1);
410
411 /*
412 * For RT2525 we should first set the channel to half band higher.
413 */
414 if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
415 static const u32 vals[] = {
416 0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a,
417 0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a,
418 0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a,
419 0x00080d2e, 0x00080d3a
420 };
421
422 rt2500pci_rf_write(rt2x00dev, rf1);
423 rt2500pci_rf_write(rt2x00dev, vals[channel - 1]);
424 rt2500pci_rf_write(rt2x00dev, rf3);
425 if (rf4)
426 rt2500pci_rf_write(rt2x00dev, rf4);
427 }
428
429 rt2500pci_rf_write(rt2x00dev, rf1);
430 rt2500pci_rf_write(rt2x00dev, rf2);
431 rt2500pci_rf_write(rt2x00dev, rf3);
432 if (rf4)
433 rt2500pci_rf_write(rt2x00dev, rf4);
434
435 /*
436 * Channel 14 requires the Japan filter bit to be set.
437 */
438 rt2500pci_bbp_write(rt2x00dev, 70, (channel == 14) ? 0x4e : 0x46);
439
440 msleep(1);
441
442 /*
443 * Switch off tuning bits.
444 * For RT2523 devices we do not need to update the R1 register.
445 */
446 rt2x00_set_field32(&rf1, RF1_TUNER, 0);
447 rt2x00_set_field32(&rf3, RF3_TUNER, 0);
448
449
450 if (!rt2x00_rf(&rt2x00dev->chip, RF2523))
451 rt2500pci_rf_write(rt2x00dev, rf1);
452
453 rt2500pci_rf_write(rt2x00dev, rf3);
454
455 /*
456 * Update rf fields
457 */
458 rt2x00dev->rf1 = rf1;
459 rt2x00dev->rf2 = rf2;
460 rt2x00dev->rf3 = rf3;
461 rt2x00dev->rf4 = rf4;
462 rt2x00dev->tx_power = txpower;
463
464 /*
465 * Clear false CRC during channel switch.
466 */
467 rt2x00pci_register_read(rt2x00dev, CNT0, &rf1);
468 }
469
470 static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev,
471 const int txpower)
472 {
473 rt2x00_set_field32(&rt2x00dev->rf3, RF3_TXPOWER,
474 TXPOWER_TO_DEV(txpower));
475 rt2500pci_rf_write(rt2x00dev, rt2x00dev->rf3);
476
477 }
478
479 static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev,
480 const int antenna_tx, const int antenna_rx)
481 {
482 u32 reg;
483 u8 r14;
484 u8 r2;
485
486 rt2x00pci_register_read(rt2x00dev, BBPCSR1, &reg);
487 rt2500pci_bbp_read(rt2x00dev, 14, &r14);
488 rt2500pci_bbp_read(rt2x00dev, 2, &r2);
489
490 /*
491 * Configure the TX antenna.
492 */
493 if (antenna_tx == ANTENNA_DIVERSITY) {
494 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
495 rt2x00_set_field32(&reg, BBPCSR1_CCK, 2);
496 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 2);
497 } else if (antenna_tx == ANTENNA_A) {
498 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
499 rt2x00_set_field32(&reg, BBPCSR1_CCK, 0);
500 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 0);
501 } else if (antenna_tx == ANTENNA_B) {
502 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
503 rt2x00_set_field32(&reg, BBPCSR1_CCK, 2);
504 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 2);
505 }
506
507 /*
508 * Configure the RX antenna.
509 */
510 if (antenna_rx == ANTENNA_DIVERSITY)
511 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
512 else if (antenna_rx == ANTENNA_A)
513 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
514 else if (antenna_rx == ANTENNA_B)
515 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
516
517 /*
518 * RT2525E and RT5222 need to flip TX I/Q
519 */
520 if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
521 rt2x00_rf(&rt2x00dev->chip, RF5222)) {
522 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
523 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 1);
524 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 1);
525
526 /*
527 * RT2525E does not need RX I/Q Flip.
528 */
529 if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
530 rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
531 } else {
532 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 0);
533 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 0);
534 }
535
536 rt2x00pci_register_write(rt2x00dev, BBPCSR1, reg);
537 rt2500pci_bbp_write(rt2x00dev, 14, r14);
538 rt2500pci_bbp_write(rt2x00dev, 2, r2);
539 }
540
541 static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev,
542 const int short_slot_time, const int beacon_int)
543 {
544 u32 reg;
545
546 rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
547 rt2x00_set_field32(&reg, CSR11_SLOT_TIME,
548 short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME);
549 rt2x00pci_register_write(rt2x00dev, CSR11, reg);
550
551 rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
552 rt2x00_set_field32(&reg, CSR18_SIFS, SIFS);
553 rt2x00_set_field32(&reg, CSR18_PIFS,
554 short_slot_time ? SHORT_PIFS : PIFS);
555 rt2x00pci_register_write(rt2x00dev, CSR18, reg);
556
557 rt2x00pci_register_read(rt2x00dev, CSR19, &reg);
558 rt2x00_set_field32(&reg, CSR19_DIFS,
559 short_slot_time ? SHORT_DIFS : DIFS);
560 rt2x00_set_field32(&reg, CSR19_EIFS, EIFS);
561 rt2x00pci_register_write(rt2x00dev, CSR19, reg);
562
563 rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
564 rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
565 rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
566 rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
567
568 rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
569 rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL, beacon_int * 16);
570 rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION, beacon_int * 16);
571 rt2x00pci_register_write(rt2x00dev, CSR12, reg);
572 }
573
574 static void rt2500pci_config_rate(struct rt2x00_dev *rt2x00dev, const int rate)
575 {
576 struct ieee80211_conf *conf = &rt2x00dev->hw->conf;
577 u32 reg;
578 u32 preamble;
579 u16 value;
580
581 preamble = DEVICE_GET_RATE_FIELD(rate, PREAMBLE)
582 ? SHORT_PREAMBLE : PREAMBLE;
583
584 reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATE;
585 rt2x00pci_register_write(rt2x00dev, ARCSR1, reg);
586
587 rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
588 value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
589 SHORT_DIFS : DIFS) +
590 PLCP + preamble + get_duration(ACK_SIZE, 10);
591 rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, value);
592 value = SIFS + PLCP + preamble + get_duration(ACK_SIZE, 10);
593 rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME, value);
594 rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
595
596 preamble = DEVICE_GET_RATE_FIELD(rate, PREAMBLE) ? 0x08 : 0x00;
597
598 rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
599 rt2x00_set_field32(&reg, ARCSR2_SIGNAL, 0x00 | preamble);
600 rt2x00_set_field32(&reg, ARCSR2_SERVICE, 0x04);
601 rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10));
602 rt2x00pci_register_write(rt2x00dev, ARCSR2, reg);
603
604 rt2x00pci_register_read(rt2x00dev, ARCSR3, &reg);
605 rt2x00_set_field32(&reg, ARCSR3_SIGNAL, 0x01 | preamble);
606 rt2x00_set_field32(&reg, ARCSR3_SERVICE, 0x04);
607 rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20));
608 rt2x00pci_register_write(rt2x00dev, ARCSR3, reg);
609
610 rt2x00pci_register_read(rt2x00dev, ARCSR4, &reg);
611 rt2x00_set_field32(&reg, ARCSR4_SIGNAL, 0x02 | preamble);
612 rt2x00_set_field32(&reg, ARCSR4_SERVICE, 0x04);
613 rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55));
614 rt2x00pci_register_write(rt2x00dev, ARCSR4, reg);
615
616 rt2x00pci_register_read(rt2x00dev, ARCSR5, &reg);
617 rt2x00_set_field32(&reg, ARCSR5_SIGNAL, 0x03 | preamble);
618 rt2x00_set_field32(&reg, ARCSR5_SERVICE, 0x84);
619 rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110));
620 rt2x00pci_register_write(rt2x00dev, ARCSR5, reg);
621 }
622
623 static void rt2500pci_config_phymode(struct rt2x00_dev *rt2x00dev,
624 const int phymode)
625 {
626 struct ieee80211_hw_mode *mode;
627 struct ieee80211_rate *rate;
628
629 if (phymode == MODE_IEEE80211A)
630 rt2x00dev->curr_hwmode = HWMODE_A;
631 else if (phymode == MODE_IEEE80211B)
632 rt2x00dev->curr_hwmode = HWMODE_B;
633 else
634 rt2x00dev->curr_hwmode = HWMODE_G;
635
636 mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
637 rate = &mode->rates[mode->num_rates - 1];
638
639 rt2500pci_config_rate(rt2x00dev, rate->val2);
640 }
641
642 static void rt2500pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr)
643 {
644 u32 reg[2];
645
646 memset(&reg, 0, sizeof(reg));
647 memcpy(&reg, addr, ETH_ALEN);
648
649 /*
650 * The MAC address is passed to us as an array of bytes,
651 * that array is little endian, so no need for byte ordering.
652 */
653 rt2x00pci_register_multiwrite(rt2x00dev, CSR3, &reg, sizeof(reg));
654 }
655
656 /*
657 * LED functions.
658 */
659 static void rt2500pci_enable_led(struct rt2x00_dev *rt2x00dev)
660 {
661 u32 reg;
662
663 rt2x00pci_register_read(rt2x00dev, LEDCSR, &reg);
664
665 rt2x00_set_field32(&reg, LEDCSR_ON_PERIOD, 70);
666 rt2x00_set_field32(&reg, LEDCSR_OFF_PERIOD, 30);
667
668 if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) {
669 rt2x00_set_field32(&reg, LEDCSR_LINK, 1);
670 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 0);
671 } else if (rt2x00dev->led_mode == LED_MODE_ASUS) {
672 rt2x00_set_field32(&reg, LEDCSR_LINK, 0);
673 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 1);
674 } else {
675 rt2x00_set_field32(&reg, LEDCSR_LINK, 1);
676 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 1);
677 }
678
679 rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
680 }
681
682 static void rt2500pci_disable_led(struct rt2x00_dev *rt2x00dev)
683 {
684 u32 reg;
685
686 rt2x00pci_register_read(rt2x00dev, LEDCSR, &reg);
687 rt2x00_set_field32(&reg, LEDCSR_LINK, 0);
688 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 0);
689 rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
690 }
691
692 /*
693 * Link tuning
694 */
695 static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev, int rssi)
696 {
697 u32 reg;
698 u8 r17;
699
700 /*
701 * To prevent collisions with MAC ASIC on chipsets
702 * up to version C the link tuning should halt after 20
703 * seconds.
704 */
705 if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D &&
706 rt2x00dev->link.count > 20)
707 return;
708
709 rt2500pci_bbp_read(rt2x00dev, 17, &r17);
710
711 /*
712 * Chipset versions C and lower should directly continue
713 * to the dynamic CCA tuning.
714 */
715 if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D)
716 goto dynamic_cca_tune;
717
718 /*
719 * A too low RSSI will cause too much false CCA which will
720 * then corrupt the R17 tuning. To remidy this the tuning should
721 * be stopped (While making sure the R17 value will not exceed limits)
722 */
723 if (rssi < -80 && rt2x00dev->link.count > 20) {
724 if (r17 >= 0x41) {
725 r17 = rt2x00dev->link.curr_noise;
726 rt2500pci_bbp_write(rt2x00dev, 17, r17);
727 }
728 return;
729 }
730
731 /*
732 * Special big-R17 for short distance
733 */
734 if (rssi >= -58) {
735 if (r17 != 0x50)
736 rt2500pci_bbp_write(rt2x00dev, 17, 0x50);
737 return;
738 }
739
740 /*
741 * Special mid-R17 for middle distance
742 */
743 if (rssi >= -74) {
744 if (r17 != 0x41)
745 rt2500pci_bbp_write(rt2x00dev, 17, 0x41);
746 return;
747 }
748
749 /*
750 * Leave short or middle distance condition, restore r17
751 * to the dynamic tuning range.
752 */
753 if (r17 >= 0x41) {
754 rt2500pci_bbp_write(rt2x00dev, 17, rt2x00dev->link.curr_noise);
755 return;
756 }
757
758 dynamic_cca_tune:
759
760 /*
761 * R17 is inside the dynamic tuning range,
762 * start tuning the link based on the false cca counter.
763 */
764 rt2x00pci_register_read(rt2x00dev, CNT3, &reg);
765 rt2x00dev->link.false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA);
766
767 if (rt2x00dev->link.false_cca > 512 && r17 < 0x40) {
768 rt2500pci_bbp_write(rt2x00dev, 17, ++r17);
769 rt2x00dev->link.curr_noise = r17;
770 } else if (rt2x00dev->link.false_cca < 100 && r17 > 0x32) {
771 rt2500pci_bbp_write(rt2x00dev, 17, --r17);
772 rt2x00dev->link.curr_noise = r17;
773 }
774 }
775
776 /*
777 * Initialization functions.
778 */
779 static void rt2500pci_init_rxring(struct rt2x00_dev *rt2x00dev)
780 {
781 struct data_desc *rxd;
782 unsigned int i;
783 u32 word;
784
785 memset(rt2x00dev->rx->data_addr, 0x00,
786 rt2x00_get_ring_size(rt2x00dev->rx));
787
788 for (i = 0; i < rt2x00dev->rx->stats.limit; i++) {
789 rxd = rt2x00dev->rx->entry[i].priv;
790
791 rt2x00_desc_read(rxd, 1, &word);
792 rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS,
793 rt2x00dev->rx->entry[i].data_dma);
794 rt2x00_desc_write(rxd, 1, word);
795
796 rt2x00_desc_read(rxd, 0, &word);
797 rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
798 rt2x00_desc_write(rxd, 0, word);
799 }
800
801 rt2x00_ring_index_clear(rt2x00dev->rx);
802 }
803
804 static void rt2500pci_init_txring(struct rt2x00_dev *rt2x00dev,
805 const int queue)
806 {
807 struct data_ring *ring = rt2x00_get_ring(rt2x00dev, queue);
808 struct data_desc *txd;
809 unsigned int i;
810 u32 word;
811
812 memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
813
814 for (i = 0; i < ring->stats.limit; i++) {
815 txd = ring->entry[i].priv;
816
817 rt2x00_desc_read(txd, 1, &word);
818 rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS,
819 ring->entry[i].data_dma);
820 rt2x00_desc_write(txd, 1, word);
821
822 rt2x00_desc_read(txd, 0, &word);
823 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
824 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
825 rt2x00_desc_write(txd, 0, word);
826 }
827
828 rt2x00_ring_index_clear(ring);
829 }
830
831 static int rt2500pci_init_rings(struct rt2x00_dev *rt2x00dev)
832 {
833 u32 reg;
834
835 /*
836 * Initialize rings.
837 */
838 rt2500pci_init_rxring(rt2x00dev);
839 rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
840 rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
841 rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON);
842 rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
843
844 /*
845 * Initialize registers.
846 */
847 rt2x00pci_register_read(rt2x00dev, TXCSR2, &reg);
848 rt2x00_set_field32(&reg, TXCSR2_TXD_SIZE,
849 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size);
850 rt2x00_set_field32(&reg, TXCSR2_NUM_TXD,
851 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit);
852 rt2x00_set_field32(&reg, TXCSR2_NUM_ATIM,
853 rt2x00dev->bcn[1].stats.limit);
854 rt2x00_set_field32(&reg, TXCSR2_NUM_PRIO,
855 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit);
856 rt2x00pci_register_write(rt2x00dev, TXCSR2, reg);
857
858 rt2x00pci_register_read(rt2x00dev, TXCSR3, &reg);
859 rt2x00_set_field32(&reg, TXCSR3_TX_RING_REGISTER,
860 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma);
861 rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
862
863 rt2x00pci_register_read(rt2x00dev, TXCSR5, &reg);
864 rt2x00_set_field32(&reg, TXCSR5_PRIO_RING_REGISTER,
865 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma);
866 rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
867
868 rt2x00pci_register_read(rt2x00dev, TXCSR4, &reg);
869 rt2x00_set_field32(&reg, TXCSR4_ATIM_RING_REGISTER,
870 rt2x00dev->bcn[1].data_dma);
871 rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
872
873 rt2x00pci_register_read(rt2x00dev, TXCSR6, &reg);
874 rt2x00_set_field32(&reg, TXCSR6_BEACON_RING_REGISTER,
875 rt2x00dev->bcn[0].data_dma);
876 rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
877
878 rt2x00pci_register_read(rt2x00dev, RXCSR1, &reg);
879 rt2x00_set_field32(&reg, RXCSR1_RXD_SIZE,
880 rt2x00dev->rx->desc_size);
881 rt2x00_set_field32(&reg, RXCSR1_NUM_RXD,
882 rt2x00dev->rx->stats.limit);
883 rt2x00pci_register_write(rt2x00dev, RXCSR1, reg);
884
885 rt2x00pci_register_read(rt2x00dev, RXCSR2, &reg);
886 rt2x00_set_field32(&reg, RXCSR2_RX_RING_REGISTER,
887 rt2x00dev->rx->data_dma);
888 rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
889
890 return 0;
891 }
892
893 static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev)
894 {
895 u32 reg;
896
897 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
898 return -EBUSY;
899
900 rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100);
901 rt2x00pci_register_write(rt2x00dev, PCICSR, 0x000003b8);
902
903 rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002);
904 rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002);
905 rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00020002);
906 rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002);
907
908 rt2x00pci_register_read(rt2x00dev, TIMECSR, &reg);
909 rt2x00_set_field32(&reg, TIMECSR_US_COUNT, 33);
910 rt2x00_set_field32(&reg, TIMECSR_US_64_COUNT, 63);
911 rt2x00_set_field32(&reg, TIMECSR_BEACON_EXPECT, 0);
912 rt2x00pci_register_write(rt2x00dev, TIMECSR, reg);
913
914 rt2x00pci_register_read(rt2x00dev, CSR9, &reg);
915 rt2x00_set_field32(&reg, CSR9_MAX_FRAME_UNIT,
916 rt2x00dev->rx->data_size / 128);
917 rt2x00pci_register_write(rt2x00dev, CSR9, reg);
918
919 rt2x00pci_register_write(rt2x00dev, CNT3, 0);
920
921 rt2x00pci_register_write(rt2x00dev, GPIOCSR, 0x0000ff00);
922 rt2x00pci_register_write(rt2x00dev, TESTCSR, 0x000000f0);
923
924 rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00213223);
925 rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518);
926
927 rt2x00pci_register_read(rt2x00dev, MACCSR2, &reg);
928 rt2x00_set_field32(&reg, MACCSR2_DELAY, 64);
929 rt2x00pci_register_write(rt2x00dev, MACCSR2, reg);
930
931 /*
932 * Always use CWmin and CWmax set in descriptor.
933 */
934 rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
935 rt2x00_set_field32(&reg, CSR11_CW_SELECT, 0);
936 rt2x00pci_register_write(rt2x00dev, CSR11, reg);
937
938 rt2x00pci_register_read(rt2x00dev, RXCSR3, &reg);
939 /*
940 * Signal.
941 */
942 rt2x00_set_field32(&reg, RXCSR3_BBP_ID0, 47);
943 rt2x00_set_field32(&reg, RXCSR3_BBP_ID0_VALID, 1);
944 /*
945 * Rssi.
946 */
947 rt2x00_set_field32(&reg, RXCSR3_BBP_ID1, 51);
948 rt2x00_set_field32(&reg, RXCSR3_BBP_ID1_VALID, 1);
949 /*
950 * OFDM Rate.
951 */
952 rt2x00_set_field32(&reg, RXCSR3_BBP_ID2, 42);
953 rt2x00_set_field32(&reg, RXCSR3_BBP_ID2_VALID, 1);
954 /*
955 * OFDM.
956 */
957 rt2x00_set_field32(&reg, RXCSR3_BBP_ID3, 51);
958 rt2x00_set_field32(&reg, RXCSR3_BBP_ID3_VALID, 1);
959 rt2x00pci_register_write(rt2x00dev, RXCSR3, reg);
960
961 rt2x00pci_register_read(rt2x00dev, RALINKCSR, &reg);
962 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA0, 17);
963 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID0, 26);
964 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID0, 1);
965 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA1, 0);
966 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID1, 26);
967 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID1, 1);
968 rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg);
969
970 rt2x00pci_register_write(rt2x00dev, BBPCSR1, 0x82188200);
971
972 rt2x00pci_register_write(rt2x00dev, TXACKCSR0, 0x00000020);
973
974 rt2x00pci_register_write(rt2x00dev, ARTCSR0, 0x7038140a);
975 rt2x00pci_register_write(rt2x00dev, ARTCSR1, 0x1d21252d);
976 rt2x00pci_register_write(rt2x00dev, ARTCSR2, 0x1919191d);
977
978 rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
979 rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 1);
980 rt2x00_set_field32(&reg, CSR1_BBP_RESET, 0);
981 rt2x00_set_field32(&reg, CSR1_HOST_READY, 0);
982 rt2x00pci_register_write(rt2x00dev, CSR1, reg);
983
984 rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
985 rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 0);
986 rt2x00_set_field32(&reg, CSR1_HOST_READY, 1);
987 rt2x00pci_register_write(rt2x00dev, CSR1, reg);
988
989 /*
990 * We must clear the FCS and FIFO error count.
991 * These registers are cleared on read,
992 * so we may pass a useless variable to store the value.
993 */
994 rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
995 rt2x00pci_register_read(rt2x00dev, CNT4, &reg);
996
997 return 0;
998 }
999
1000 static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev)
1001 {
1002 unsigned int i;
1003 u16 eeprom;
1004 u8 reg_id;
1005 u8 value;
1006
1007 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1008 rt2500pci_bbp_read(rt2x00dev, 0, &value);
1009 if ((value != 0xff) && (value != 0x00))
1010 goto continue_csr_init;
1011 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
1012 udelay(REGISTER_BUSY_DELAY);
1013 }
1014
1015 ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1016 return -EACCES;
1017
1018 continue_csr_init:
1019 rt2500pci_bbp_write(rt2x00dev, 3, 0x02);
1020 rt2500pci_bbp_write(rt2x00dev, 4, 0x19);
1021 rt2500pci_bbp_write(rt2x00dev, 14, 0x1c);
1022 rt2500pci_bbp_write(rt2x00dev, 15, 0x30);
1023 rt2500pci_bbp_write(rt2x00dev, 16, 0xac);
1024 rt2500pci_bbp_write(rt2x00dev, 17, 0x48);
1025 rt2500pci_bbp_write(rt2x00dev, 18, 0x18);
1026 rt2500pci_bbp_write(rt2x00dev, 19, 0xff);
1027 rt2500pci_bbp_write(rt2x00dev, 20, 0x1e);
1028 rt2500pci_bbp_write(rt2x00dev, 21, 0x08);
1029 rt2500pci_bbp_write(rt2x00dev, 22, 0x08);
1030 rt2500pci_bbp_write(rt2x00dev, 23, 0x08);
1031 rt2500pci_bbp_write(rt2x00dev, 24, 0x70);
1032 rt2500pci_bbp_write(rt2x00dev, 25, 0x40);
1033 rt2500pci_bbp_write(rt2x00dev, 26, 0x08);
1034 rt2500pci_bbp_write(rt2x00dev, 27, 0x23);
1035 rt2500pci_bbp_write(rt2x00dev, 30, 0x10);
1036 rt2500pci_bbp_write(rt2x00dev, 31, 0x2b);
1037 rt2500pci_bbp_write(rt2x00dev, 32, 0xb9);
1038 rt2500pci_bbp_write(rt2x00dev, 34, 0x12);
1039 rt2500pci_bbp_write(rt2x00dev, 35, 0x50);
1040 rt2500pci_bbp_write(rt2x00dev, 39, 0xc4);
1041 rt2500pci_bbp_write(rt2x00dev, 40, 0x02);
1042 rt2500pci_bbp_write(rt2x00dev, 41, 0x60);
1043 rt2500pci_bbp_write(rt2x00dev, 53, 0x10);
1044 rt2500pci_bbp_write(rt2x00dev, 54, 0x18);
1045 rt2500pci_bbp_write(rt2x00dev, 56, 0x08);
1046 rt2500pci_bbp_write(rt2x00dev, 57, 0x10);
1047 rt2500pci_bbp_write(rt2x00dev, 58, 0x08);
1048 rt2500pci_bbp_write(rt2x00dev, 61, 0x6d);
1049 rt2500pci_bbp_write(rt2x00dev, 62, 0x10);
1050
1051 DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
1052 for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1053 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1054
1055 if (eeprom != 0xffff && eeprom != 0x0000) {
1056 reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1057 value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1058 DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
1059 reg_id, value);
1060 rt2500pci_bbp_write(rt2x00dev, reg_id, value);
1061 }
1062 }
1063 DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
1064
1065 return 0;
1066 }
1067
1068 /*
1069 * Device state switch handlers.
1070 */
1071 static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
1072 enum dev_state state)
1073 {
1074 u32 reg;
1075
1076 rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
1077 rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
1078 state == STATE_RADIO_RX_OFF);
1079 rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
1080 }
1081
1082 static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev)
1083 {
1084 u32 reg;
1085
1086 /*
1087 * Initialize all registers.
1088 */
1089 if (rt2500pci_init_rings(rt2x00dev) ||
1090 rt2500pci_init_registers(rt2x00dev) ||
1091 rt2500pci_init_bbp(rt2x00dev)) {
1092 ERROR(rt2x00dev, "Register initialization failed.\n");
1093 return -EIO;
1094 }
1095
1096 /*
1097 * Clear interrupts.
1098 */
1099 rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1100 rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1101
1102 /*
1103 * Enable interrupts.
1104 */
1105 rt2x00pci_register_read(rt2x00dev, CSR8, &reg);
1106 rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, 0);
1107 rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, 0);
1108 rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, 0);
1109 rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, 0);
1110 rt2x00_set_field32(&reg, CSR8_RXDONE, 0);
1111 rt2x00pci_register_write(rt2x00dev, CSR8, reg);
1112
1113 /*
1114 * Enable LED
1115 */
1116 rt2500pci_enable_led(rt2x00dev);
1117
1118 return 0;
1119 }
1120
1121 static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev)
1122 {
1123 u32 reg;
1124
1125 /*
1126 * Disable LED
1127 */
1128 rt2500pci_disable_led(rt2x00dev);
1129
1130 rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
1131
1132 /*
1133 * Disable synchronisation.
1134 */
1135 rt2x00pci_register_write(rt2x00dev, CSR14, 0);
1136
1137 /*
1138 * Cancel RX and TX.
1139 */
1140 rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1141 rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
1142 rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1143
1144 /*
1145 * Disable interrupts.
1146 */
1147 rt2x00pci_register_read(rt2x00dev, CSR8, &reg);
1148 rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, 1);
1149 rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, 1);
1150 rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, 1);
1151 rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, 1);
1152 rt2x00_set_field32(&reg, CSR8_RXDONE, 1);
1153 rt2x00pci_register_write(rt2x00dev, CSR8, reg);
1154 }
1155
1156 static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev,
1157 enum dev_state state)
1158 {
1159 u32 reg;
1160 unsigned int i;
1161 char put_to_sleep;
1162 char bbp_state;
1163 char rf_state;
1164
1165 put_to_sleep = (state != STATE_AWAKE);
1166
1167 rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1168 rt2x00_set_field32(&reg, PWRCSR1_SET_STATE, 1);
1169 rt2x00_set_field32(&reg, PWRCSR1_BBP_DESIRE_STATE, state);
1170 rt2x00_set_field32(&reg, PWRCSR1_RF_DESIRE_STATE, state);
1171 rt2x00_set_field32(&reg, PWRCSR1_PUT_TO_SLEEP, put_to_sleep);
1172 rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg);
1173
1174 /*
1175 * Device is not guaranteed to be in the requested state yet.
1176 * We must wait until the register indicates that the
1177 * device has entered the correct state.
1178 */
1179 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1180 rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1181 bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE);
1182 rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE);
1183 if (bbp_state == state && rf_state == state)
1184 return 0;
1185 msleep(10);
1186 }
1187
1188 NOTICE(rt2x00dev, "Device failed to enter state %d, "
1189 "current device state: bbp %d and rf %d.\n",
1190 state, bbp_state, rf_state);
1191
1192 return -EBUSY;
1193 }
1194
1195 static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
1196 enum dev_state state)
1197 {
1198 int retval = 0;
1199
1200 switch (state) {
1201 case STATE_RADIO_ON:
1202 retval = rt2500pci_enable_radio(rt2x00dev);
1203 break;
1204 case STATE_RADIO_OFF:
1205 rt2500pci_disable_radio(rt2x00dev);
1206 break;
1207 case STATE_RADIO_RX_ON:
1208 case STATE_RADIO_RX_OFF:
1209 rt2500pci_toggle_rx(rt2x00dev, state);
1210 break;
1211 case STATE_DEEP_SLEEP:
1212 case STATE_SLEEP:
1213 case STATE_STANDBY:
1214 case STATE_AWAKE:
1215 retval = rt2500pci_set_state(rt2x00dev, state);
1216 break;
1217 default:
1218 retval = -ENOTSUPP;
1219 break;
1220 }
1221
1222 return retval;
1223 }
1224
1225 /*
1226 * TX descriptor initialization
1227 */
1228 static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1229 struct data_entry *entry, struct data_desc *txd,
1230 struct data_entry_desc *desc, struct ieee80211_hdr *ieee80211hdr,
1231 unsigned int length, struct ieee80211_tx_control *control)
1232 {
1233 u32 word;
1234
1235 /*
1236 * Start writing the descriptor words.
1237 */
1238 rt2x00_desc_read(txd, 2, &word);
1239 rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER);
1240 rt2x00_set_field32(&word, TXD_W2_AIFS, entry->ring->tx_params.aifs);
1241 rt2x00_set_field32(&word, TXD_W2_CWMIN, entry->ring->tx_params.cw_min);
1242 rt2x00_set_field32(&word, TXD_W2_CWMAX, entry->ring->tx_params.cw_max);
1243 rt2x00_desc_write(txd, 2, word);
1244
1245 rt2x00_desc_read(txd, 3, &word);
1246 rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, desc->signal);
1247 rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, desc->service);
1248 rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, desc->length_low);
1249 rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, desc->length_high);
1250 rt2x00_desc_write(txd, 3, word);
1251
1252 rt2x00_desc_read(txd, 10, &word);
1253 rt2x00_set_field32(&word, TXD_W10_RTS,
1254 test_bit(ENTRY_TXD_RTS_FRAME, &entry->flags));
1255 rt2x00_desc_write(txd, 10, word);
1256
1257 rt2x00_desc_read(txd, 0, &word);
1258 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1259 rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1260 rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1261 test_bit(ENTRY_TXD_MORE_FRAG, &entry->flags));
1262 rt2x00_set_field32(&word, TXD_W0_ACK,
1263 test_bit(ENTRY_TXD_REQ_ACK, &entry->flags));
1264 rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1265 test_bit(ENTRY_TXD_REQ_TIMESTAMP, &entry->flags));
1266 rt2x00_set_field32(&word, TXD_W0_OFDM,
1267 test_bit(ENTRY_TXD_OFDM_RATE, &entry->flags));
1268 rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1);
1269 rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
1270 rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, 0);
1271 rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length);
1272 rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
1273 rt2x00_desc_write(txd, 0, word);
1274 }
1275
1276 /*
1277 * TX data initialization
1278 */
1279 static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, int queue)
1280 {
1281 u32 reg;
1282
1283 if (queue == IEEE80211_TX_QUEUE_BEACON) {
1284 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
1285 if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
1286 rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
1287 rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1288 }
1289 return;
1290 }
1291
1292 rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1293 if (queue == IEEE80211_TX_QUEUE_DATA0)
1294 rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, 1);
1295 else if (queue == IEEE80211_TX_QUEUE_DATA1)
1296 rt2x00_set_field32(&reg, TXCSR0_KICK_TX, 1);
1297 else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON)
1298 rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM, 1);
1299 rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1300 }
1301
1302 /*
1303 * Interrupt functions.
1304 */
1305 static void rt2500pci_rxdone(struct rt2x00_dev *rt2x00dev)
1306 {
1307 struct data_ring *ring = rt2x00dev->rx;
1308 struct data_entry *entry;
1309 struct data_desc *rxd;
1310 u32 word0;
1311 u32 word2;
1312 int signal;
1313 int rssi;
1314 int ofdm;
1315 u16 size;
1316
1317 while (1) {
1318 entry = rt2x00_get_data_entry(ring);
1319 rxd = entry->priv;
1320 rt2x00_desc_read(rxd, 0, &word0);
1321 rt2x00_desc_read(rxd, 2, &word2);
1322
1323 if (rt2x00_get_field32(word0, RXD_W0_OWNER_NIC))
1324 break;
1325
1326 /*
1327 * TODO: Don't we need to keep statistics
1328 * updated about events like CRC and physical errors?
1329 */
1330 if (rt2x00_get_field32(word0, RXD_W0_CRC) ||
1331 rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1332 goto skip_entry;
1333
1334 /*
1335 * Obtain the status about this packet.
1336 */
1337 size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1338 signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
1339 rssi = rt2x00_get_field32(word2, RXD_W2_RSSI);
1340 ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
1341
1342 /*
1343 * Send the packet to upper layer.
1344 */
1345 rt2x00lib_rxdone(entry, entry->data_addr, size,
1346 signal, rssi, ofdm);
1347
1348 skip_entry:
1349 if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) {
1350 rt2x00_set_field32(&word0, RXD_W0_OWNER_NIC, 1);
1351 rt2x00_desc_write(rxd, 0, word0);
1352 }
1353
1354 rt2x00_ring_index_inc(ring);
1355 }
1356 }
1357
1358 static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue)
1359 {
1360 struct data_ring *ring = rt2x00_get_ring(rt2x00dev, queue);
1361 struct data_entry *entry;
1362 struct data_desc *txd;
1363 u32 word;
1364 int tx_status;
1365 int retry;
1366
1367 while (!rt2x00_ring_empty(ring)) {
1368 entry = rt2x00_get_data_entry_done(ring);
1369 txd = entry->priv;
1370 rt2x00_desc_read(txd, 0, &word);
1371
1372 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1373 !rt2x00_get_field32(word, TXD_W0_VALID))
1374 break;
1375
1376 /*
1377 * Obtain the status about this packet.
1378 */
1379 tx_status = rt2x00_get_field32(word, TXD_W0_RESULT);
1380 retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
1381
1382 rt2x00lib_txdone(entry, tx_status, retry);
1383
1384 /*
1385 * Make this entry available for reuse.
1386 */
1387 entry->flags = 0;
1388 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
1389 rt2x00_desc_write(txd, 0, word);
1390 rt2x00_ring_index_done_inc(ring);
1391 }
1392
1393 /*
1394 * If the data ring was full before the txdone handler
1395 * we must make sure the packet queue in the mac80211 stack
1396 * is reenabled when the txdone handler has finished.
1397 */
1398 entry = ring->entry;
1399 if (!rt2x00_ring_full(ring))
1400 ieee80211_wake_queue(rt2x00dev->hw,
1401 entry->tx_status.control.queue);
1402 }
1403
1404 static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
1405 {
1406 struct rt2x00_dev *rt2x00dev = dev_instance;
1407 u32 reg;
1408
1409 /*
1410 * Get the interrupt sources & saved to local variable.
1411 * Write register value back to clear pending interrupts.
1412 */
1413 rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1414 rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1415
1416 if (!reg)
1417 return IRQ_NONE;
1418
1419 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
1420 return IRQ_HANDLED;
1421
1422 /*
1423 * Handle interrupts, walk through all bits
1424 * and run the tasks, the bits are checked in order of
1425 * priority.
1426 */
1427
1428 /*
1429 * 1 - Beacon timer expired interrupt.
1430 */
1431 if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
1432 rt2x00pci_beacondone(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
1433
1434 /*
1435 * 2 - Rx ring done interrupt.
1436 */
1437 if (rt2x00_get_field32(reg, CSR7_RXDONE))
1438 rt2500pci_rxdone(rt2x00dev);
1439
1440 /*
1441 * 3 - Atim ring transmit done interrupt.
1442 */
1443 if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
1444 rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON);
1445
1446 /*
1447 * 4 - Priority ring transmit done interrupt.
1448 */
1449 if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
1450 rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
1451
1452 /*
1453 * 5 - Tx ring transmit done interrupt.
1454 */
1455 if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
1456 rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
1457
1458 return IRQ_HANDLED;
1459 }
1460
1461 /*
1462 * Device initialization functions.
1463 */
1464 static int rt2500pci_alloc_eeprom(struct rt2x00_dev *rt2x00dev)
1465 {
1466 struct eeprom_93cx6 eeprom;
1467 u32 reg;
1468 u16 word;
1469
1470 /*
1471 * Allocate the eeprom memory, check the eeprom width
1472 * and copy the entire eeprom into this allocated memory.
1473 */
1474 rt2x00dev->eeprom = kzalloc(EEPROM_SIZE, GFP_KERNEL);
1475 if (!rt2x00dev->eeprom)
1476 return -ENOMEM;
1477
1478 rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
1479
1480 eeprom.data = rt2x00dev;
1481 eeprom.register_read = rt2500pci_eepromregister_read;
1482 eeprom.register_write = rt2500pci_eepromregister_write;
1483 eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ?
1484 PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
1485 eeprom.reg_data_in = 0;
1486 eeprom.reg_data_out = 0;
1487 eeprom.reg_data_clock = 0;
1488 eeprom.reg_chip_select = 0;
1489
1490 eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
1491 EEPROM_SIZE / sizeof(u16));
1492
1493 /*
1494 * Start validation of the data that has been read.
1495 */
1496 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1497 if (word == 0xffff) {
1498 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1499 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0);
1500 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0);
1501 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0);
1502 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1503 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1504 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1505 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1506 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1507 }
1508
1509 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1510 if (word == 0xffff) {
1511 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1512 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1513 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1514 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1515 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1516 }
1517
1518 rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1519 if (word == 0xffff) {
1520 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1521 MAX_RX_SSI);
1522 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1523 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1524 }
1525
1526 return 0;
1527 }
1528
1529 static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
1530 {
1531 u32 reg;
1532 u16 value;
1533 u16 eeprom;
1534
1535 /*
1536 * Read EEPROM word for configuration.
1537 */
1538 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1539
1540 /*
1541 * Identify RF chipset.
1542 */
1543 value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1544 rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
1545 rt2x00_set_chip(rt2x00dev, RT2560, value, reg);
1546
1547 if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
1548 !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
1549 !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
1550 !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
1551 !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
1552 !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1553 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1554 return -ENODEV;
1555 }
1556
1557 /*
1558 * Identify default antenna configuration.
1559 */
1560 rt2x00dev->hw->conf.antenna_sel_tx = rt2x00_get_field16(eeprom,
1561 EEPROM_ANTENNA_TX_DEFAULT);
1562 rt2x00dev->hw->conf.antenna_sel_rx = rt2x00_get_field16(eeprom,
1563 EEPROM_ANTENNA_RX_DEFAULT);
1564
1565 /*
1566 * Store led mode, for correct led behaviour.
1567 */
1568 rt2x00dev->led_mode = rt2x00_get_field16(eeprom,
1569 EEPROM_ANTENNA_LED_MODE);
1570
1571 /*
1572 * Detect if this device has an hardware controlled radio.
1573 */
1574 if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1575 __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
1576
1577 /*
1578 * Check if the BBP tuning should be enabled.
1579 */
1580 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1581
1582 if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1583 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1584
1585 /*
1586 * Read the RSSI <-> dBm offset information.
1587 */
1588 rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1589 rt2x00dev->hw->max_rssi =
1590 rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1591
1592 return 0;
1593 }
1594
1595 static const struct {
1596 unsigned int chip;
1597 u32 val[3];
1598 } rf_vals[] = {
1599 { RF2522, { 0x00002050, 0x00000101, 0x00000000 } },
1600 { RF2523, { 0x00022010, 0x000e0111, 0x00000a1b } },
1601 { RF2524, { 0x00032020, 0x00000101, 0x00000a1b } },
1602 { RF2525, { 0x00022020, 0x00060111, 0x00000a1b } },
1603 { RF2525E, { 0x00022020, 0x00060111, 0x00000a0b } },
1604 { RF5222, { 0x00000000, 0x00000101, 0x00000000 } },
1605 };
1606
1607 /*
1608 * RF value list for RF2522
1609 * Supports: 2.4 GHz
1610 */
1611 static const u32 rf_vals_bg_2522[] = {
1612 0x000c1fda, 0x000c1fee, 0x000c2002, 0x000c2016, 0x000c202a,
1613 0x000c203e, 0x000c2052, 0x000c2066, 0x000c207a, 0x000c208e,
1614 0x000c20a2, 0x000c20b6, 0x000c20ca, 0x000c20fa
1615 };
1616
1617 /*
1618 * RF value list for RF2523, RF2524 & RF2525
1619 * Supports: 2.4 GHz
1620 */
1621 static const u32 rf_vals_bg_252x[] = {
1622 0x00000c9e, 0x00000ca2, 0x00000ca6, 0x00000caa, 0x00000cae,
1623 0x00000cb2, 0x00000cb6, 0x00000cba, 0x00000cbe, 0x00000d02,
1624 0x00000d06, 0x00000d0a, 0x00000d0e, 0x00000d1a
1625 };
1626
1627 /*
1628 * RF value list for RF2525E & RF5222
1629 * Supports: 2.4 GHz
1630 */
1631 static const u32 rf_vals_bg_5x[] = {
1632 0x00001136, 0x0000113a, 0x0000113e, 0x00001182, 0x00001186,
1633 0x0000118a, 0x0000118e, 0x00001192, 0x00001196, 0x0000119a,
1634 0x0000119e, 0x000011a2, 0x000011a6, 0x000011ae
1635 };
1636
1637 /*
1638 * RF value list for RF5222 (supplement to rf_vals_bg_5x)
1639 * Supports: 5.2 GHz
1640 */
1641 static const u32 rf_vals_a_5x[] = {
1642 0x00018896, 0x0001889a, 0x0001889e, 0x000188a2, 0x000188a6,
1643 0x000188aa, 0x000188ae, 0x000188b2, 0x00008802, 0x00008806,
1644 0x0000880a, 0x0000880e, 0x00008812, 0x00008816, 0x0000881a,
1645 0x0000881e, 0x00008822, 0x00008826, 0x0000882a, 0x000090a6,
1646 0x000090ae, 0x000090b6, 0x000090be
1647 };
1648
1649 static void rt2500pci_init_hw_mode(struct rt2x00_dev *rt2x00dev)
1650 {
1651 struct hw_mode_spec *spec = &rt2x00dev->spec;
1652 u8 *txpower;
1653 unsigned int i;
1654
1655 /*
1656 * Initialize all hw fields.
1657 */
1658 rt2x00dev->hw->flags = IEEE80211_HW_HOST_GEN_BEACON |
1659 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1660 IEEE80211_HW_WEP_INCLUDE_IV |
1661 IEEE80211_HW_DATA_NULLFUNC_ACK |
1662 IEEE80211_HW_NO_TKIP_WMM_HWACCEL |
1663 IEEE80211_HW_MONITOR_DURING_OPER;
1664 rt2x00dev->hw->extra_tx_headroom = 0;
1665 rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1666 rt2x00dev->hw->max_noise = MAX_RX_NOISE;
1667 rt2x00dev->hw->queues = 2;
1668
1669 /*
1670 * This device supports ATIM
1671 */
1672 __set_bit(DEVICE_SUPPORT_ATIM, &rt2x00dev->flags);
1673
1674 /*
1675 * Set device specific, but channel independent RF values.
1676 */
1677 for (i = 0; i < ARRAY_SIZE(rf_vals); i++) {
1678 if (rt2x00_rf(&rt2x00dev->chip, rf_vals[i].chip)) {
1679 rt2x00dev->rf1 = rf_vals[i].val[0];
1680 rt2x00dev->rf3 = rf_vals[i].val[1];
1681 rt2x00dev->rf4 = rf_vals[i].val[2];
1682 }
1683 }
1684
1685 /*
1686 * Convert tx_power array in eeprom.
1687 */
1688 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1689 for (i = 0; i < 14; i++)
1690 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1691
1692 /*
1693 * Initialize hw_mode information.
1694 */
1695 spec->mac_addr = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1696 spec->num_modes = 2;
1697 spec->num_rates = 12;
1698 spec->num_channels = 14;
1699 spec->tx_power_a = NULL;
1700 spec->tx_power_bg = txpower;
1701 spec->tx_power_default = DEFAULT_TXPOWER;
1702 spec->chan_val_a = NULL;
1703
1704 if (rt2x00_rf(&rt2x00dev->chip, RF2522))
1705 spec->chan_val_bg = rf_vals_bg_2522;
1706 else if (rt2x00_rf(&rt2x00dev->chip, RF2523) ||
1707 rt2x00_rf(&rt2x00dev->chip, RF2524) ||
1708 rt2x00_rf(&rt2x00dev->chip, RF2525))
1709 spec->chan_val_bg = rf_vals_bg_252x;
1710 else if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
1711 rt2x00_rf(&rt2x00dev->chip, RF5222))
1712 spec->chan_val_bg = rf_vals_bg_5x;
1713
1714 if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1715 spec->num_modes = 3;
1716 spec->num_channels += 23;
1717 spec->chan_val_a = rf_vals_a_5x;
1718 }
1719 }
1720
1721 static int rt2500pci_init_hw(struct rt2x00_dev *rt2x00dev)
1722 {
1723 int retval;
1724
1725 /*
1726 * Allocate eeprom data.
1727 */
1728 retval = rt2500pci_alloc_eeprom(rt2x00dev);
1729 if (retval)
1730 return retval;
1731
1732 retval = rt2500pci_init_eeprom(rt2x00dev);
1733 if (retval)
1734 return retval;
1735
1736 /*
1737 * Initialize hw specifications.
1738 */
1739 rt2500pci_init_hw_mode(rt2x00dev);
1740
1741 return 0;
1742 }
1743
1744 /*
1745 * IEEE80211 stack callback functions.
1746 */
1747 static int rt2500pci_get_stats(struct ieee80211_hw *hw,
1748 struct ieee80211_low_level_stats *stats)
1749 {
1750 struct rt2x00_dev *rt2x00dev = hw->priv;
1751 u32 reg;
1752
1753 /*
1754 * Update FCS error count from register.
1755 * The dot11ACKFailureCount, dot11RTSFailureCount and
1756 * dot11RTSSuccessCount are updated in interrupt time.
1757 */
1758 rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
1759 rt2x00dev->low_level_stats.dot11FCSErrorCount +=
1760 rt2x00_get_field32(reg, CNT0_FCS_ERROR);
1761
1762 memcpy(stats, &rt2x00dev->low_level_stats, sizeof(*stats));
1763
1764 return 0;
1765 }
1766
1767 static int rt2500pci_set_retry_limit(struct ieee80211_hw *hw,
1768 u32 short_retry, u32 long_retry)
1769 {
1770 struct rt2x00_dev *rt2x00dev = hw->priv;
1771 u32 reg;
1772
1773 rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
1774 rt2x00_set_field32(&reg, CSR11_LONG_RETRY, long_retry);
1775 rt2x00_set_field32(&reg, CSR11_SHORT_RETRY, short_retry);
1776 rt2x00pci_register_write(rt2x00dev, CSR11, reg);
1777
1778 return 0;
1779 }
1780
1781 static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw)
1782 {
1783 struct rt2x00_dev *rt2x00dev = hw->priv;
1784 u64 tsf;
1785 u32 reg;
1786
1787 rt2x00pci_register_read(rt2x00dev, CSR17, &reg);
1788 tsf = (u64)rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32;
1789 rt2x00pci_register_read(rt2x00dev, CSR16, &reg);
1790 tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER);
1791
1792 return tsf;
1793 }
1794
1795 static void rt2500pci_reset_tsf(struct ieee80211_hw *hw)
1796 {
1797 struct rt2x00_dev *rt2x00dev = hw->priv;
1798
1799 rt2x00pci_register_write(rt2x00dev, CSR16, 0);
1800 rt2x00pci_register_write(rt2x00dev, CSR17, 0);
1801 }
1802
1803 static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw)
1804 {
1805 struct rt2x00_dev *rt2x00dev = hw->priv;
1806 u32 reg;
1807
1808 rt2x00pci_register_read(rt2x00dev, CSR15, &reg);
1809 return rt2x00_get_field32(reg, CSR15_BEACON_SENT);
1810 }
1811
1812 static const struct ieee80211_ops rt2500pci_mac80211_ops = {
1813 .tx = rt2x00lib_tx,
1814 .reset = rt2x00lib_reset,
1815 .open = rt2x00lib_open,
1816 .stop = rt2x00lib_stop,
1817 .add_interface = rt2x00lib_add_interface,
1818 .remove_interface = rt2x00lib_remove_interface,
1819 .config = rt2x00lib_config,
1820 .config_interface = rt2x00lib_config_interface,
1821 .set_multicast_list = rt2x00lib_set_multicast_list,
1822 .get_stats = rt2500pci_get_stats,
1823 .set_retry_limit = rt2500pci_set_retry_limit,
1824 .conf_tx = rt2x00lib_conf_tx,
1825 .get_tx_stats = rt2x00lib_get_tx_stats,
1826 .get_tsf = rt2500pci_get_tsf,
1827 .reset_tsf = rt2500pci_reset_tsf,
1828 .beacon_update = rt2x00pci_beacon_update,
1829 .tx_last_beacon = rt2500pci_tx_last_beacon,
1830 };
1831
1832 static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
1833 .irq_handler = rt2500pci_interrupt,
1834 .init_hw = rt2500pci_init_hw,
1835 .initialize = rt2x00pci_initialize,
1836 .uninitialize = rt2x00pci_uninitialize,
1837 .set_device_state = rt2500pci_set_device_state,
1838 #ifdef CONFIG_RT2500PCI_RFKILL
1839 .rfkill_poll = rt2500pci_rfkill_poll,
1840 #endif /* CONFIG_RT2500PCI_RFKILL */
1841 .link_tuner = rt2500pci_link_tuner,
1842 .write_tx_desc = rt2500pci_write_tx_desc,
1843 .write_tx_data = rt2x00pci_write_tx_data,
1844 .kick_tx_queue = rt2500pci_kick_tx_queue,
1845 .config_type = rt2500pci_config_type,
1846 .config_phymode = rt2500pci_config_phymode,
1847 .config_channel = rt2500pci_config_channel,
1848 .config_mac_addr = rt2500pci_config_mac_addr,
1849 .config_bssid = rt2500pci_config_bssid,
1850 .config_promisc = rt2500pci_config_promisc,
1851 .config_txpower = rt2500pci_config_txpower,
1852 .config_antenna = rt2500pci_config_antenna,
1853 .config_duration = rt2500pci_config_duration,
1854 };
1855
1856 static const struct rt2x00_ops rt2500pci_ops = {
1857 .name = DRV_NAME,
1858 .rxd_size = RXD_DESC_SIZE,
1859 .txd_size = TXD_DESC_SIZE,
1860 .lib = &rt2500pci_rt2x00_ops,
1861 .hw = &rt2500pci_mac80211_ops,
1862 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1863 .debugfs = &rt2500pci_rt2x00debug,
1864 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1865 };
1866
1867 /*
1868 * RT2500pci module information.
1869 */
1870 static struct pci_device_id rt2500pci_device_table[] = {
1871 { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) },
1872 { 0, }
1873 };
1874
1875 MODULE_AUTHOR(DRV_PROJECT);
1876 MODULE_VERSION(DRV_VERSION);
1877 MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver.");
1878 MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards");
1879 MODULE_DEVICE_TABLE(pci, rt2500pci_device_table);
1880 MODULE_LICENSE("GPL");
1881
1882 static struct pci_driver rt2500pci_driver = {
1883 .name = DRV_NAME,
1884 .id_table = rt2500pci_device_table,
1885 .probe = rt2x00pci_probe,
1886 .remove = __devexit_p(rt2x00pci_remove),
1887 #ifdef CONFIG_PM
1888 .suspend = rt2x00pci_suspend,
1889 .resume = rt2x00pci_resume,
1890 #endif /* CONFIG_PM */
1891 };
1892
1893 static int __init rt2500pci_init(void)
1894 {
1895 printk(KERN_INFO "Loading module: %s - %s by %s.\n",
1896 DRV_NAME, DRV_VERSION, DRV_PROJECT);
1897 return pci_register_driver(&rt2500pci_driver);
1898 }
1899
1900 static void __exit rt2500pci_exit(void)
1901 {
1902 printk(KERN_INFO "Unloading module: %s.\n", DRV_NAME);
1903 pci_unregister_driver(&rt2500pci_driver);
1904 }
1905
1906 module_init(rt2500pci_init);
1907 module_exit(rt2500pci_exit);
OpenWrt SVN history