package/utils/busybox/config/util-linux/Config.in

   1 # DO NOT EDIT. This file is generated from Config.src
   2 #
   3 # For a description of the syntax of this configuration file,
   4 # see scripts/kbuild/config-language.txt.
   5 #
   6
   7 menu "Linux System Utilities"
   8
   9 config BUSYBOX_CONFIG_BLOCKDEV
  10         bool "blockdev"
  11         default n
  12         help
  13           Performs some ioctls with block devices.
  14 config BUSYBOX_CONFIG_REV
  15         bool "rev"
  16         default n
  17         help
  18           Reverse lines of a file or files.
  19
  20 config BUSYBOX_CONFIG_ACPID
  21         bool "acpid"
  22         default n
  23         select BUSYBOX_CONFIG_PLATFORM_LINUX
  24         help
  25           acpid listens to ACPI events coming either in textual form from
  26           /proc/acpi/event (though it is marked deprecated it is still widely
  27           used and _is_ a standard) or in binary form from specified evdevs
  28           (just use /dev/input/event*).
  29
  30           It parses the event to retrieve ACTION and a possible PARAMETER.
  31           It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
  32           (if the resulting path is a directory) or directly as an executable.
  33
  34           N.B. acpid relies on run-parts so have the latter installed.
  35
  36 config BUSYBOX_CONFIG_FEATURE_ACPID_COMPAT
  37         bool "Accept and ignore redundant options"
  38         default n
  39         depends on BUSYBOX_CONFIG_ACPID
  40         help
  41           Accept and ignore compatibility options -g -m -s -S -v.
  42
  43 config BUSYBOX_CONFIG_BLKID
  44         bool "blkid"
  45         default n
  46         select BUSYBOX_CONFIG_PLATFORM_LINUX
  47         select BUSYBOX_CONFIG_VOLUMEID
  48         help
  49           Lists labels and UUIDs of all filesystems.
  50           WARNING:
  51           With all submodules selected, it will add ~8k to busybox.
  52
  53 config BUSYBOX_CONFIG_FEATURE_BLKID_TYPE
  54         bool "Print filesystem type"
  55         default n
  56         depends on BUSYBOX_CONFIG_BLKID
  57         help
  58           Show TYPE="filesystem type"
  59
  60 config BUSYBOX_CONFIG_DMESG
  61         bool "dmesg"
  62         default y
  63         select BUSYBOX_CONFIG_PLATFORM_LINUX
  64         help
  65           dmesg is used to examine or control the kernel ring buffer. When the
  66           Linux kernel prints messages to the system log, they are stored in
  67           the kernel ring buffer. You can use dmesg to print the kernel's ring
  68           buffer, clear the kernel ring buffer, change the size of the kernel
  69           ring buffer, and change the priority level at which kernel messages
  70           are also logged to the system console. Enable this option if you
  71           wish to enable the 'dmesg' utility.
  72
  73 config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
  74         bool "Pretty dmesg output"
  75         default y
  76         depends on BUSYBOX_CONFIG_DMESG
  77         help
  78           If you wish to scrub the syslog level from the output, say 'Y' here.
  79           The syslog level is a string prefixed to every line with the form
  80           "<#>".
  81
  82           With this option you will see:
  83             # dmesg
  84             Linux version 2.6.17.4 .....
  85             BIOS-provided physical RAM map:
  86              BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
  87
  88           Without this option you will see:
  89             # dmesg
  90             <5>Linux version 2.6.17.4 .....
  91             <6>BIOS-provided physical RAM map:
  92             <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
  93
  94 config BUSYBOX_CONFIG_FBSET
  95         bool "fbset"
  96         default n
  97         select BUSYBOX_CONFIG_PLATFORM_LINUX
  98         help
  99           fbset is used to show or change the settings of a Linux frame buffer
 100           device. The frame buffer device provides a simple and unique
 101           interface to access a graphics display. Enable this option
 102           if you wish to enable the 'fbset' utility.
 103
 104 config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
 105         bool "Turn on extra fbset options"
 106         default n
 107         depends on BUSYBOX_CONFIG_FBSET
 108         help
 109           This option enables extended fbset options, allowing one to set the
 110           framebuffer size, color depth, etc. interface to access a graphics
 111           display. Enable this option if you wish to enable extended fbset
 112           options.
 113
 114 config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
 115         bool "Turn on fbset readmode support"
 116         default n
 117         depends on BUSYBOX_CONFIG_FBSET
 118         help
 119           This option allows fbset to read the video mode database stored by
 120           default n /etc/fb.modes, which can be used to set frame buffer
 121           device to pre-defined video modes.
 122
 123 config BUSYBOX_CONFIG_FDFLUSH
 124         bool "fdflush"
 125         default n
 126         select BUSYBOX_CONFIG_PLATFORM_LINUX
 127         help
 128           fdflush is only needed when changing media on slightly-broken
 129           removable media drives. It is used to make Linux believe that a
 130           hardware disk-change switch has been actuated, which causes Linux to
 131           forget anything it has cached from the previous media. If you have
 132           such a slightly-broken drive, you will need to run fdflush every time
 133           you change a disk. Most people have working hardware and can safely
 134           leave this disabled.
 135
 136 config BUSYBOX_CONFIG_FDFORMAT
 137         bool "fdformat"
 138         default n
 139         select BUSYBOX_CONFIG_PLATFORM_LINUX
 140         help
 141           fdformat is used to low-level format a floppy disk.
 142
 143 config BUSYBOX_CONFIG_FDISK
 144         bool "fdisk"
 145         default n
 146         select BUSYBOX_CONFIG_PLATFORM_LINUX
 147         help
 148           The fdisk utility is used to divide hard disks into one or more
 149           logical disks, which are generally called partitions. This utility
 150           can be used to list and edit the set of partitions or BSD style
 151           'disk slices' that are defined on a hard drive.
 152
 153 config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
 154         bool "Support over 4GB disks"
 155         default y
 156         depends on BUSYBOX_CONFIG_FDISK
 157         depends on !BUSYBOX_CONFIG_LFS   # with LFS no special code is needed
 158         help
 159           Enable this option to support large disks > 4GB.
 160
 161 config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 162         bool "Write support"
 163         default n
 164         depends on BUSYBOX_CONFIG_FDISK
 165         help
 166           Enabling this option allows you to create or change a partition table
 167           and write those changes out to disk. If you leave this option
 168           disabled, you will only be able to view the partition table.
 169
 170 config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
 171         bool "Support AIX disklabels"
 172         default n
 173         depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 174         help
 175           Enabling this option allows you to create or change AIX disklabels.
 176           Most people can safely leave this option disabled.
 177
 178 config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
 179         bool "Support SGI disklabels"
 180         default n
 181         depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 182         help
 183           Enabling this option allows you to create or change SGI disklabels.
 184           Most people can safely leave this option disabled.
 185
 186 config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
 187         bool "Support SUN disklabels"
 188         default n
 189         depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 190         help
 191           Enabling this option allows you to create or change SUN disklabels.
 192           Most people can safely leave this option disabled.
 193
 194 config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
 195         bool "Support BSD disklabels"
 196         default n
 197         depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 198         help
 199           Enabling this option allows you to create or change BSD disklabels
 200           and define and edit BSD disk slices.
 201
 202 config BUSYBOX_CONFIG_FEATURE_GPT_LABEL
 203         bool "Support GPT disklabels"
 204         default n
 205         depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 206         help
 207           Enabling this option allows you to view GUID Partition Table
 208           disklabels.
 209
 210 config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
 211         bool "Support expert mode"
 212         default n
 213         depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 214         help
 215           Enabling this option allows you to do terribly unsafe things like
 216           define arbitrary drive geometry, move the beginning of data in a
 217           partition, and similarly evil things. Unless you have a very good
 218           reason you would be wise to leave this disabled.
 219
 220 config BUSYBOX_CONFIG_FINDFS
 221         bool "findfs"
 222         default n
 223         select BUSYBOX_CONFIG_PLATFORM_LINUX
 224         select BUSYBOX_CONFIG_VOLUMEID
 225         help
 226           Prints the name of a filesystem with given label or UUID.
 227           WARNING:
 228           With all submodules selected, it will add ~8k to busybox.
 229
 230 config BUSYBOX_CONFIG_FLOCK
 231         bool "flock"
 232         default n
 233         help
 234           Manage locks from shell scripts
 235
 236 config BUSYBOX_CONFIG_FREERAMDISK
 237         bool "freeramdisk"
 238         default n
 239         select BUSYBOX_CONFIG_PLATFORM_LINUX
 240         help
 241           Linux allows you to create ramdisks. This utility allows you to
 242           delete them and completely free all memory that was used for the
 243           ramdisk. For example, if you boot Linux into a ramdisk and later
 244           pivot_root, you may want to free the memory that is allocated to the
 245           ramdisk. If you have no use for freeing memory from a ramdisk, leave
 246           this disabled.
 247
 248 config BUSYBOX_CONFIG_FSCK_MINIX
 249         bool "fsck_minix"
 250         default n
 251         help
 252           The minix filesystem is a nice, small, compact, read-write filesystem
 253           with little overhead. It is not a journaling filesystem however and
 254           can experience corruption if it is not properly unmounted or if the
 255           power goes off in the middle of a write. This utility allows you to
 256           check for and attempt to repair any corruption that occurs to a minix
 257           filesystem.
 258
 259 config BUSYBOX_CONFIG_MKFS_EXT2
 260         bool "mkfs_ext2"
 261         default n
 262         select BUSYBOX_CONFIG_PLATFORM_LINUX
 263         help
 264           Utility to create EXT2 filesystems.
 265
 266 config BUSYBOX_CONFIG_MKFS_MINIX
 267         bool "mkfs_minix"
 268         default n
 269         select BUSYBOX_CONFIG_PLATFORM_LINUX
 270         help
 271           The minix filesystem is a nice, small, compact, read-write filesystem
 272           with little overhead. If you wish to be able to create minix
 273           filesystems this utility will do the job for you.
 274
 275 config BUSYBOX_CONFIG_FEATURE_MINIX2
 276         bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
 277         default n
 278         depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
 279         help
 280           If you wish to be able to create version 2 minix filesystems, enable
 281           this. If you enabled 'mkfs_minix' then you almost certainly want to
 282           be using the version 2 filesystem support.
 283
 284 config BUSYBOX_CONFIG_MKFS_REISER
 285         bool "mkfs_reiser"
 286         default n
 287         select BUSYBOX_CONFIG_PLATFORM_LINUX
 288         help
 289           Utility to create ReiserFS filesystems.
 290           Note: this applet needs a lot of testing and polishing.
 291
 292 config BUSYBOX_CONFIG_MKFS_VFAT
 293         bool "mkfs_vfat"
 294         default n
 295         select BUSYBOX_CONFIG_PLATFORM_LINUX
 296         help
 297           Utility to create FAT32 filesystems.
 298
 299 config BUSYBOX_CONFIG_GETOPT
 300         bool "getopt"
 301         default n
 302         help
 303           The getopt utility is used to break up (parse) options in command
 304           lines to make it easy to write complex shell scripts that also check
 305           for legal (and illegal) options. If you want to write horribly
 306           complex shell scripts, or use some horribly complex shell script
 307           written by others, this utility may be for you. Most people will
 308           wisely leave this disabled.
 309
 310 config BUSYBOX_CONFIG_FEATURE_GETOPT_LONG
 311         bool "Support option -l"
 312         default n if BUSYBOX_CONFIG_LONG_OPTS
 313         depends on BUSYBOX_CONFIG_GETOPT
 314         help
 315           Enable support for long options (option -l).
 316
 317 config BUSYBOX_CONFIG_HEXDUMP
 318         bool "hexdump"
 319         default y
 320         help
 321           The hexdump utility is used to display binary data in a readable
 322           way that is comparable to the output from most hex editors.
 323
 324 config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE
 325         bool "Support -R, reverse of 'hexdump -Cv'"
 326         default n
 327         depends on BUSYBOX_CONFIG_HEXDUMP
 328         help
 329           The hexdump utility is used to display binary data in an ascii
 330           readable way. This option creates binary data from an ascii input.
 331           NB: this option is non-standard. It's unwise to use it in scripts
 332           aimed to be portable.
 333
 334 config BUSYBOX_CONFIG_HD
 335         bool "hd"
 336         default n
 337         depends on BUSYBOX_CONFIG_HEXDUMP
 338         help
 339           hd is an alias to hexdump -C.
 340
 341 config BUSYBOX_CONFIG_HWCLOCK
 342         bool "hwclock"
 343         default y
 344         select BUSYBOX_CONFIG_PLATFORM_LINUX
 345         help
 346           The hwclock utility is used to read and set the hardware clock
 347           on a system. This is primarily used to set the current time on
 348           shutdown in the hardware clock, so the hardware will keep the
 349           correct time when Linux is _not_ running.
 350
 351 config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
 352         bool "Support long options (--hctosys,...)"
 353         default n
 354         depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_LONG_OPTS
 355         help
 356           By default, the hwclock utility only uses short options. If you
 357           are overly fond of its long options, such as --hctosys, --utc, etc)
 358           then enable this option.
 359
 360 config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
 361         bool "Use FHS /var/lib/hwclock/adjtime"
 362         default n  # util-linux-ng in Fedora 13 still uses /etc/adjtime
 363         depends on BUSYBOX_CONFIG_HWCLOCK
 364         help
 365           Starting with FHS 2.3, the adjtime state file is supposed to exist
 366           at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
 367           to use the FHS behavior, answer Y here, otherwise answer N for the
 368           classic /etc/adjtime path.
 369
 370           pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
 371
 372 config BUSYBOX_CONFIG_IPCRM
 373         bool "ipcrm"
 374         default n
 375         help
 376           The ipcrm utility allows the removal of System V interprocess
 377           communication (IPC) objects and the associated data structures
 378           from the system.
 379
 380 config BUSYBOX_CONFIG_IPCS
 381         bool "ipcs"
 382         default n
 383         select BUSYBOX_CONFIG_PLATFORM_LINUX
 384         help
 385           The ipcs utility is used to provide information on the currently
 386           allocated System V interprocess (IPC) objects in the system.
 387
 388 config BUSYBOX_CONFIG_LOSETUP
 389         bool "losetup"
 390         default n
 391         select BUSYBOX_CONFIG_PLATFORM_LINUX
 392         help
 393           losetup is used to associate or detach a loop device with a regular
 394           file or block device, and to query the status of a loop device. This
 395           version does not currently support enabling data encryption.
 396
 397 config BUSYBOX_CONFIG_LSPCI
 398         bool "lspci"
 399         default n
 400         #select PLATFORM_LINUX
 401         help
 402           lspci is a utility for displaying information about PCI buses in the
 403           system and devices connected to them.
 404
 405           This version uses sysfs (/sys/bus/pci/devices) only.
 406
 407 config BUSYBOX_CONFIG_LSUSB
 408         bool "lsusb"
 409         default n
 410         #select PLATFORM_LINUX
 411         help
 412           lsusb is a utility for displaying information about USB buses in the
 413           system and devices connected to them.
 414
 415           This version uses sysfs (/sys/bus/usb/devices) only.
 416
 417 config BUSYBOX_CONFIG_MDEV
 418         bool "mdev"
 419         default n
 420         select BUSYBOX_CONFIG_PLATFORM_LINUX
 421         help
 422           mdev is a mini-udev implementation for dynamically creating device
 423           nodes in the /dev directory.
 424
 425           For more information, please see docs/mdev.txt
 426
 427 config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 428         bool "Support /etc/mdev.conf"
 429         default n
 430         depends on BUSYBOX_CONFIG_MDEV
 431         help
 432           Add support for the mdev config file to control ownership and
 433           permissions of the device nodes.
 434
 435           For more information, please see docs/mdev.txt
 436
 437 config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
 438         bool "Support subdirs/symlinks"
 439         default n
 440         depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 441         help
 442           Add support for renaming devices and creating symlinks.
 443
 444           For more information, please see docs/mdev.txt
 445
 446 config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
 447         bool "Support regular expressions substitutions when renaming device"
 448         default n
 449         depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
 450         help
 451           Add support for regular expressions substitutions when renaming
 452           device.
 453
 454 config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
 455         bool "Support command execution at device addition/removal"
 456         default n
 457         depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 458         help
 459           This adds support for an optional field to /etc/mdev.conf for
 460           executing commands when devices are created/removed.
 461
 462           For more information, please see docs/mdev.txt
 463
 464 config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
 465         bool "Support loading of firmwares"
 466         default n
 467         depends on BUSYBOX_CONFIG_MDEV
 468         help
 469           Some devices need to load firmware before they can be usable.
 470
 471           These devices will request userspace look up the files in
 472           /lib/firmware/ and if it exists, send it to the kernel for
 473           loading into the hardware.
 474
 475 config BUSYBOX_CONFIG_MKSWAP
 476         bool "mkswap"
 477         default y
 478         help
 479           The mkswap utility is used to configure a file or disk partition as
 480           Linux swap space. This allows Linux to use the entire file or
 481           partition as if it were additional RAM, which can greatly increase
 482           the capability of low-memory machines. This additional memory is
 483           much slower than real RAM, but can be very helpful at preventing your
 484           applications being killed by the Linux out of memory (OOM) killer.
 485           Once you have created swap space using 'mkswap' you need to enable
 486           the swap space using the 'swapon' utility.
 487
 488 config BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID
 489         bool "UUID support"
 490         default n
 491         depends on BUSYBOX_CONFIG_MKSWAP
 492         help
 493           Generate swap spaces with universally unique identifiers.
 494
 495 config BUSYBOX_CONFIG_MORE
 496         bool "more"
 497         default n
 498         help
 499           more is a simple utility which allows you to read text one screen
 500           sized page at a time. If you want to read text that is larger than
 501           the screen, and you are using anything faster than a 300 baud modem,
 502           you will probably find this utility very helpful. If you don't have
 503           any need to reading text files, you can leave this disabled.
 504
 505 config BUSYBOX_CONFIG_MOUNT
 506         bool "mount"
 507         default y
 508         select BUSYBOX_CONFIG_PLATFORM_LINUX
 509         help
 510           All files and filesystems in Unix are arranged into one big directory
 511           tree. The 'mount' utility is used to graft a filesystem onto a
 512           particular part of the tree. A filesystem can either live on a block
 513           device, or it can be accessible over the network, as is the case with
 514           NFS filesystems. Most people using BusyBox will also want to enable
 515           the 'mount' utility.
 516
 517 config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
 518         bool "Support option -f"
 519         default n
 520         depends on BUSYBOX_CONFIG_MOUNT
 521         help
 522           Enable support for faking a file system mount.
 523
 524 config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
 525         bool "Support option -v"
 526         default n
 527         depends on BUSYBOX_CONFIG_MOUNT
 528         help
 529           Enable multi-level -v[vv...] verbose messages. Useful if you
 530           debug mount problems and want to see what is exactly passed
 531           to the kernel.
 532
 533 config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
 534         bool "Support mount helpers"
 535         default y
 536         depends on BUSYBOX_CONFIG_MOUNT
 537         help
 538           Enable mounting of virtual file systems via external helpers.
 539           E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
 540           "obexfs -b00.11.22.33.44.55 /mnt"
 541           Also "mount -t sometype [-o opts] fs /mnt" will try
 542           "sometype [-o opts] fs /mnt" if simple mount syscall fails.
 543           The idea is to use such virtual filesystems in /etc/fstab.
 544
 545 config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
 546         bool "Support specifying devices by label or UUID"
 547         default n
 548         depends on BUSYBOX_CONFIG_MOUNT
 549         select BUSYBOX_CONFIG_VOLUMEID
 550         help
 551           This allows for specifying a device by label or uuid, rather than by
 552           name. This feature utilizes the same functionality as blkid/findfs.
 553           This also enables label or uuid support for swapon.
 554
 555 config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
 556         bool "Support mounting NFS file systems"
 557         default n
 558         depends on BUSYBOX_CONFIG_MOUNT
 559         select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
 560         select BUSYBOX_CONFIG_FEATURE_SYSLOG
 561         help
 562           Enable mounting of NFS file systems.
 563
 564 config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
 565         bool "Support mounting CIFS/SMB file systems"
 566         default y
 567         depends on BUSYBOX_CONFIG_MOUNT
 568         help
 569           Enable support for samba mounts.
 570
 571 config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
 572         depends on BUSYBOX_CONFIG_MOUNT
 573         bool "Support lots of -o flags in mount"
 574         default y
 575         help
 576           Without this, mount only supports ro/rw/remount. With this, it
 577           supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
 578           noatime, diratime, nodiratime, loud, bind, move, shared, slave,
 579           private, unbindable, rshared, rslave, rprivate, and runbindable.
 580
 581 config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
 582         depends on BUSYBOX_CONFIG_MOUNT
 583         bool "Support /etc/fstab and -a"
 584         default y
 585         help
 586           Support mount all and looking for files in /etc/fstab.
 587
 588 config BUSYBOX_CONFIG_PIVOT_ROOT
 589         bool "pivot_root"
 590         default y
 591         select BUSYBOX_CONFIG_PLATFORM_LINUX
 592         help
 593           The pivot_root utility swaps the mount points for the root filesystem
 594           with some other mounted filesystem. This allows you to do all sorts
 595           of wild and crazy things with your Linux system and is far more
 596           powerful than 'chroot'.
 597
 598           Note: This is for initrd in linux 2.4. Under initramfs (introduced
 599           in linux 2.6) use switch_root instead.
 600
 601 config BUSYBOX_CONFIG_RDATE
 602         bool "rdate"
 603         default n
 604         help
 605           The rdate utility allows you to synchronize the date and time of your
 606           system clock with the date and time of a remote networked system using
 607           the RFC868 protocol, which is built into the inetd daemon on most
 608           systems.
 609
 610 config BUSYBOX_CONFIG_RDEV
 611         bool "rdev"
 612         default n
 613         help
 614           Print the device node associated with the filesystem mounted at '/'.
 615
 616 config BUSYBOX_CONFIG_READPROFILE
 617         bool "readprofile"
 618         default n
 619         #select PLATFORM_LINUX
 620         help
 621           This allows you to parse /proc/profile for basic profiling.
 622
 623 config BUSYBOX_CONFIG_RTCWAKE
 624         bool "rtcwake"
 625         default n
 626         select BUSYBOX_CONFIG_PLATFORM_LINUX
 627         help
 628           Enter a system sleep state until specified wakeup time.
 629
 630 config BUSYBOX_CONFIG_SCRIPT
 631         bool "script"
 632         default n
 633         help
 634           The script makes typescript of terminal session.
 635
 636 config BUSYBOX_CONFIG_SCRIPTREPLAY
 637         bool "scriptreplay"
 638         default n
 639         help
 640           This program replays a typescript, using timing information
 641           given by script -t.
 642
 643 config BUSYBOX_CONFIG_SETARCH
 644         bool "setarch"
 645         default n
 646         select BUSYBOX_CONFIG_PLATFORM_LINUX
 647         help
 648           The linux32 utility is used to create a 32bit environment for the
 649           specified program (usually a shell). It only makes sense to have
 650           this util on a system that supports both 64bit and 32bit userland
 651           (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
 652
 653 config BUSYBOX_CONFIG_SWAPONOFF
 654         bool "swaponoff"
 655         default y
 656         select BUSYBOX_CONFIG_PLATFORM_LINUX
 657         help
 658           This option enables both the 'swapon' and the 'swapoff' utilities.
 659           Once you have created some swap space using 'mkswap', you also need
 660           to enable your swap space with the 'swapon' utility. The 'swapoff'
 661           utility is used, typically at system shutdown, to disable any swap
 662           space. If you are not using any swap space, you can leave this
 663           option disabled.
 664
 665 config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
 666         bool "Support priority option -p"
 667         default n
 668         depends on BUSYBOX_CONFIG_SWAPONOFF
 669         help
 670           Enable support for setting swap device priority in swapon.
 671
 672 config BUSYBOX_CONFIG_SWITCH_ROOT
 673         bool "switch_root"
 674         default y
 675         select BUSYBOX_CONFIG_PLATFORM_LINUX
 676         help
 677           The switch_root utility is used from initramfs to select a new
 678           root device. Under initramfs, you have to use this instead of
 679           pivot_root. (Stop reading here if you don't care why.)
 680
 681           Booting with initramfs extracts a gzipped cpio archive into rootfs
 682           (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
 683           or unmounted*, pivot_root will not work from initramfs. Instead,
 684           switch_root deletes everything out of rootfs (including itself),
 685           does a mount --move that overmounts rootfs with the new root, and
 686           then execs the specified init program.
 687
 688           * Because the Linux kernel uses rootfs internally as the starting
 689           and ending point for searching through the kernel's doubly linked
 690           list of active mount points. That's why.
 691
 692 config BUSYBOX_CONFIG_UMOUNT
 693         bool "umount"
 694         default y
 695         select BUSYBOX_CONFIG_PLATFORM_LINUX
 696         help
 697           When you want to remove a mounted filesystem from its current mount
 698           point, for example when you are shutting down the system, the
 699           'umount' utility is the tool to use. If you enabled the 'mount'
 700           utility, you almost certainly also want to enable 'umount'.
 701
 702 config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
 703         bool "Support option -a"
 704         default y
 705         depends on BUSYBOX_CONFIG_UMOUNT
 706         help
 707           Support -a option to unmount all currently mounted filesystems.
 708
 709 comment "Common options for mount/umount"
 710         depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 711
 712 config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
 713         bool "Support loopback mounts"
 714         default y
 715         depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 716         help
 717           Enabling this feature allows automatic mounting of files (containing
 718           filesystem images) via the linux kernel's loopback devices.
 719           The mount command will detect you are trying to mount a file instead
 720           of a block device, and transparently associate the file with a
 721           loopback device. The umount command will also free that loopback
 722           device.
 723
 724           You can still use the 'losetup' utility (to manually associate files
 725           with loop devices) if you need to do something advanced, such as
 726           specify an offset or cryptographic options to the loopback device.
 727           (If you don't want umount to free the loop device, use "umount -D".)
 728
 729 config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP_CREATE
 730         bool "Create new loopback devices if needed"
 731         default n
 732         depends on BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
 733         help
 734           Linux kernels >= 2.6.24 support unlimited loopback devices. They are
 735           allocated for use when trying to use a loop device. The loop device
 736           must however exist.
 737
 738           This feature lets mount to try to create next /dev/loopN device
 739           if it does not find a free one.
 740
 741 config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
 742         bool "Support for the old /etc/mtab file"
 743         default n
 744         depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 745         select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
 746         help
 747           Historically, Unix systems kept track of the currently mounted
 748           partitions in the file "/etc/mtab". These days, the kernel exports
 749           the list of currently mounted partitions in "/proc/mounts", rendering
 750           the old mtab file obsolete. (In modern systems, /etc/mtab should be
 751           a symlink to /proc/mounts.)
 752
 753           The only reason to have mount maintain an /etc/mtab file itself is if
 754           your stripped-down embedded system does not have a /proc directory.
 755           If you must use this, keep in mind it's inherently brittle (for
 756           example a mount under chroot won't update it), can't handle modern
 757           features like separate per-process filesystem namespaces, requires
 758           that your /etc directory be writable, tends to get easily confused
 759           by --bind or --move mounts, won't update if you rename a directory
 760           that contains a mount point, and so on. (In brief: avoid.)
 761
 762           About the only reason to use this is if you've removed /proc from
 763           your kernel.
 764
 765 config BUSYBOX_CONFIG_VOLUMEID
 766         bool #No description makes it a hidden option
 767         default n
 768
 769 menu "Filesystem/Volume identification"
 770         depends on BUSYBOX_CONFIG_VOLUMEID
 771
 772 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT
 773         bool "Ext filesystem"
 774         default n
 775         depends on BUSYBOX_CONFIG_VOLUMEID
 776         help
 777           TODO
 778
 779 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS
 780         bool "btrfs filesystem"
 781         default n
 782         depends on BUSYBOX_CONFIG_VOLUMEID
 783         help
 784           TODO
 785
 786 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS
 787         bool "Reiser filesystem"
 788         default n
 789         depends on BUSYBOX_CONFIG_VOLUMEID
 790         help
 791           TODO
 792
 793 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT
 794         bool "fat filesystem"
 795         default n
 796         depends on BUSYBOX_CONFIG_VOLUMEID
 797         help
 798           TODO
 799
 800 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS
 801         bool "hfs filesystem"
 802         default n
 803         depends on BUSYBOX_CONFIG_VOLUMEID
 804         help
 805           TODO
 806
 807 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS
 808         bool "jfs filesystem"
 809         default n
 810         depends on BUSYBOX_CONFIG_VOLUMEID
 811         help
 812           TODO
 813
 814 ### config FEATURE_VOLUMEID_UFS
 815 ###     bool "ufs filesystem"
 816 ###     default y
 817 ###     depends on VOLUMEID
 818 ###     help
 819 ###       TODO
 820
 821 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS
 822         bool "xfs filesystem"
 823         default n
 824         depends on BUSYBOX_CONFIG_VOLUMEID
 825         help
 826           TODO
 827
 828 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS
 829         bool "ntfs filesystem"
 830         default n
 831         depends on BUSYBOX_CONFIG_VOLUMEID
 832         help
 833           TODO
 834
 835 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660
 836         bool "iso9660 filesystem"
 837         default n
 838         depends on BUSYBOX_CONFIG_VOLUMEID
 839         help
 840           TODO
 841
 842 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF
 843         bool "udf filesystem"
 844         default n
 845         depends on BUSYBOX_CONFIG_VOLUMEID
 846         help
 847           TODO
 848
 849 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS
 850         bool "luks filesystem"
 851         default n
 852         depends on BUSYBOX_CONFIG_VOLUMEID
 853         help
 854           TODO
 855
 856 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP
 857         bool "linux swap filesystem"
 858         default n
 859         depends on BUSYBOX_CONFIG_VOLUMEID
 860         help
 861           TODO
 862
 863 ### config FEATURE_VOLUMEID_LVM
 864 ###     bool "lvm"
 865 ###     default y
 866 ###     depends on VOLUMEID
 867 ###     help
 868 ###       TODO
 869
 870 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS
 871         bool "cramfs filesystem"
 872         default n
 873         depends on BUSYBOX_CONFIG_VOLUMEID
 874         help
 875           TODO
 876
 877 ### config FEATURE_VOLUMEID_HPFS
 878 ###     bool "hpfs filesystem"
 879 ###     default y
 880 ###     depends on VOLUMEID
 881 ###     help
 882 ###       TODO
 883
 884 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS
 885         bool "romfs filesystem"
 886         default n
 887         depends on BUSYBOX_CONFIG_VOLUMEID
 888         help
 889           TODO
 890
 891 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV
 892         bool "sysv filesystem"
 893         default n
 894         depends on BUSYBOX_CONFIG_VOLUMEID
 895         help
 896           TODO
 897
 898 ### config FEATURE_VOLUMEID_MINIX
 899 ###     bool "minix filesystem"
 900 ###     default y
 901 ###     depends on VOLUMEID
 902 ###     help
 903 ###       TODO
 904
 905 ### These only detect partition tables - not used (yet?)
 906 ### config FEATURE_VOLUMEID_MAC
 907 ###     bool "mac filesystem"
 908 ###     default y
 909 ###     depends on VOLUMEID
 910 ###     help
 911 ###       TODO
 912 ###
 913 ### config FEATURE_VOLUMEID_MSDOS
 914 ###     bool "msdos filesystem"
 915 ###     default y
 916 ###     depends on VOLUMEID
 917 ###     help
 918 ###       TODO
 919
 920 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2
 921         bool "ocfs2 filesystem"
 922         default n
 923         depends on BUSYBOX_CONFIG_VOLUMEID
 924         help
 925           TODO
 926
 927 ### config FEATURE_VOLUMEID_HIGHPOINTRAID
 928 ###     bool "highpoint raid"
 929 ###     default y
 930 ###     depends on VOLUMEID
 931 ###     help
 932 ###       TODO
 933
 934 ### config FEATURE_VOLUMEID_ISWRAID
 935 ###     bool "intel raid"
 936 ###     default y
 937 ###     depends on VOLUMEID
 938 ###     help
 939 ###       TODO
 940
 941 ### config FEATURE_VOLUMEID_LSIRAID
 942 ###     bool "lsi raid"
 943 ###     default y
 944 ###     depends on VOLUMEID
 945 ###     help
 946 ###       TODO
 947
 948 ### config FEATURE_VOLUMEID_VIARAID
 949 ###     bool "via raid"
 950 ###     default y
 951 ###     depends on VOLUMEID
 952 ###     help
 953 ###       TODO
 954
 955 ### config FEATURE_VOLUMEID_SILICONRAID
 956 ###     bool "silicon raid"
 957 ###     default y
 958 ###     depends on VOLUMEID
 959 ###     help
 960 ###       TODO
 961
 962 ### config FEATURE_VOLUMEID_NVIDIARAID
 963 ###     bool "nvidia raid"
 964 ###     default y
 965 ###     depends on VOLUMEID
 966 ###     help
 967 ###       TODO
 968
 969 ### config FEATURE_VOLUMEID_PROMISERAID
 970 ###     bool "promise raid"
 971 ###     default y
 972 ###     depends on VOLUMEID
 973 ###     help
 974 ###       TODO
 975
 976 config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID
 977         bool "linuxraid"
 978         default n
 979         depends on BUSYBOX_CONFIG_VOLUMEID
 980         help
 981           TODO
 982
 983 endmenu
 984
 985 endmenu