[brcm-2.4] update to 2.4.37, tested on wrt54gs (#4766)
[openwrt/svn-archive/archive.git] / package / wpa_supplicant / config.brcm-2.4
1 # Example wpa_supplicant build time configuration
2 #
3 # This file lists the configuration options that are used when building the
4 # hostapd binary. All lines starting with # are ignored. Configuration option
5 # lines must be commented out complete, if they are not to be included, i.e.,
6 # just setting VARIABLE=n is not disabling that variable.
7 #
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cases, these lines should use += in order not
10 # to override previous values of the variables.
11
12
13 # Uncomment following two lines and fix the paths if you have installed OpenSSL
14 # or GnuTLS in non-default location
15 #CFLAGS += -I/usr/local/openssl/include
16 #LIBS += -L/usr/local/openssl/lib
17
18 # Some Red Hat versions seem to include kerberos header files from OpenSSL, but
19 # the kerberos files are not in the default include path. Following line can be
20 # used to fix build issues on such systems (krb5.h not found).
21 #CFLAGS += -I/usr/include/kerberos
22
23 # Example configuration for various cross-compilation platforms
24
25 #### sveasoft (e.g., for Linksys WRT54G) ######################################
26 #CC=mipsel-uclibc-gcc
27 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
28 #CFLAGS += -Os
29 #CPPFLAGS += -I../src/include -I../../src/router/openssl/include
30 #LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
31 ###############################################################################
32
33 #### openwrt (e.g., for Linksys WRT54G) #######################################
34 #CC=mipsel-uclibc-gcc
35 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
36 #CFLAGS += -Os
37 #CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
38 # -I../WRT54GS/release/src/include
39 #LIBS = -lssl
40 ###############################################################################
41
42
43 # Driver interface for Host AP driver
44 #CONFIG_DRIVER_HOSTAP=y
45
46 # Driver interface for Agere driver
47 #CONFIG_DRIVER_HERMES=y
48 # Change include directories to match with the local setup
49 #CFLAGS += -I../../hcf -I../../include -I../../include/hcf
50 #CFLAGS += -I../../include/wireless
51
52 # Driver interface for madwifi driver
53 CONFIG_DRIVER_MADWIFI=y
54 # Set include directory to the madwifi source tree
55 #CFLAGS += -I../../madwifi
56
57 # Driver interface for Prism54 driver
58 # (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
59 # for developers only)
60 #CONFIG_DRIVER_PRISM54=y
61
62 # Driver interface for ndiswrapper
63 #CONFIG_DRIVER_NDISWRAPPER=y
64
65 # Driver interface for Atmel driver
66 #CONFIG_DRIVER_ATMEL=y
67
68 # Driver interface for old Broadcom driver
69 # Please note that the newer Broadcom driver ("hybrid Linux driver") supports
70 # Linux wireless extensions and does not need (or even work) with the old
71 # driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
72 #CONFIG_DRIVER_BROADCOM=y
73 # Example path for wlioctl.h; change to match your configuration
74 #CFLAGS += -I/opt/WRT54GS/release/src/include
75
76 # Driver interface for Intel ipw2100/2200 driver
77 #CONFIG_DRIVER_IPW=y
78
79 # Driver interface for Ralink driver
80 #CONFIG_DRIVER_RALINK=y
81
82 # Driver interface for generic Linux wireless extensions
83 CONFIG_DRIVER_WEXT=y
84
85 # Driver interface for Linux drivers using the nl80211 kernel interface
86 #CONFIG_DRIVER_NL80211=y
87
88 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
89 #CONFIG_DRIVER_BSD=y
90 #CFLAGS += -I/usr/local/include
91 #LIBS += -L/usr/local/lib
92
93 # Driver interface for Windows NDIS
94 #CONFIG_DRIVER_NDIS=y
95 #CFLAGS += -I/usr/include/w32api/ddk
96 #LIBS += -L/usr/local/lib
97 # For native build using mingw
98 #CONFIG_NATIVE_WINDOWS=y
99 # Additional directories for cross-compilation on Linux host for mingw target
100 #CFLAGS += -I/opt/mingw/mingw32/include/ddk
101 #LIBS += -L/opt/mingw/mingw32/lib
102 #CC=mingw32-gcc
103 # By default, driver_ndis uses WinPcap for low-level operations. This can be
104 # replaced with the following option which replaces WinPcap calls with NDISUIO.
105 # However, this requires that WZC is disabled (net stop wzcsvc) before starting
106 # wpa_supplicant.
107 # CONFIG_USE_NDISUIO=y
108
109 # Driver interface for development testing
110 #CONFIG_DRIVER_TEST=y
111
112 # Driver interface for wired Ethernet drivers
113 CONFIG_DRIVER_WIRED=y
114
115 # Driver interface for the Broadcom RoboSwitch family
116 CONFIG_DRIVER_ROBOSWITCH=y
117
118 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
119 # included)
120 CONFIG_IEEE8021X_EAPOL=y
121
122 # EAP-MD5
123 CONFIG_EAP_MD5=y
124
125 # EAP-MSCHAPv2
126 CONFIG_EAP_MSCHAPV2=y
127
128 # EAP-TLS
129 CONFIG_EAP_TLS=y
130
131 # EAL-PEAP
132 CONFIG_EAP_PEAP=y
133
134 # EAP-TTLS
135 CONFIG_EAP_TTLS=y
136
137 # EAP-FAST
138 # Note: Default OpenSSL package does not include support for all the
139 # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
140 # the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
141 # to add the needed functions.
142 #CONFIG_EAP_FAST=y
143
144 # EAP-GTC
145 CONFIG_EAP_GTC=y
146
147 # EAP-OTP
148 #CONFIG_EAP_OTP=y
149
150 # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
151 #CONFIG_EAP_SIM=y
152
153 # EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
154 #CONFIG_EAP_PSK=y
155
156 # EAP-PAX
157 #CONFIG_EAP_PAX=y
158
159 # LEAP
160 CONFIG_EAP_LEAP=y
161
162 # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
163 #CONFIG_EAP_AKA=y
164
165 # EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
166 # This requires CONFIG_EAP_AKA to be enabled, too.
167 #CONFIG_EAP_AKA_PRIME=y
168
169 # Enable USIM simulator (Milenage) for EAP-AKA
170 #CONFIG_USIM_SIMULATOR=y
171
172 # EAP-SAKE
173 #CONFIG_EAP_SAKE=y
174
175 # EAP-GPSK
176 #CONFIG_EAP_GPSK=y
177 # Include support for optional SHA256 cipher suite in EAP-GPSK
178 #CONFIG_EAP_GPSK_SHA256=y
179
180 # EAP-TNC and related Trusted Network Connect support (experimental)
181 #CONFIG_EAP_TNC=y
182
183 # Wi-Fi Protected Setup (WPS)
184 #CONFIG_WPS=y
185
186 # EAP-IKEv2
187 #CONFIG_EAP_IKEV2=y
188
189 # PKCS#12 (PFX) support (used to read private key and certificate file from
190 # a file that usually has extension .p12 or .pfx)
191 CONFIG_PKCS12=y
192
193 # Smartcard support (i.e., private key on a smartcard), e.g., with openssl
194 # engine.
195 #CONFIG_SMARTCARD=y
196
197 # PC/SC interface for smartcards (USIM, GSM SIM)
198 # Enable this if EAP-SIM or EAP-AKA is included
199 #CONFIG_PCSC=y
200
201 # Development testing
202 #CONFIG_EAPOL_TEST=y
203
204 # Select control interface backend for external programs, e.g, wpa_cli:
205 # unix = UNIX domain sockets (default for Linux/*BSD)
206 # udp = UDP sockets using localhost (127.0.0.1)
207 # named_pipe = Windows Named Pipe (default for Windows)
208 # y = use default (backwards compatibility)
209 # If this option is commented out, control interface is not included in the
210 # build.
211 CONFIG_CTRL_IFACE=y
212
213 # Include support for GNU Readline and History Libraries in wpa_cli.
214 # When building a wpa_cli binary for distribution, please note that these
215 # libraries are licensed under GPL and as such, BSD license may not apply for
216 # the resulting binary.
217 #CONFIG_READLINE=y
218
219 # Remove debugging code that is printing out debug message to stdout.
220 # This can be used to reduce the size of the wpa_supplicant considerably
221 # if debugging code is not needed. The size reduction can be around 35%
222 # (e.g., 90 kB).
223 #CONFIG_NO_STDOUT_DEBUG=y
224
225 # Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
226 # 35-50 kB in code size.
227 #CONFIG_NO_WPA=y
228
229 # Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
230 # save about 1 kB in code size when building only WPA-Personal (no EAP support)
231 # or 6 kB if building for WPA-Enterprise.
232 #CONFIG_NO_WPA2=y
233
234 # Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
235 # This option can be used to reduce code size by removing support for
236 # converting ASCII passphrases into PSK. If this functionality is removed, the
237 # PSK can only be configured as the 64-octet hexstring (e.g., from
238 # wpa_passphrase). This saves about 0.5 kB in code size.
239 #CONFIG_NO_WPA_PASSPHRASE=y
240
241 # Remove AES extra functions. This can be used to reduce code size by about
242 # 1.5 kB by removing extra AES modes that are not needed for commonly used
243 # client configurations (they are needed for some EAP types).
244 #CONFIG_NO_AES_EXTRAS=y
245
246 # Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
247 # This can be used if ap_scan=1 mode is never enabled.
248 #CONFIG_NO_SCAN_PROCESSING=y
249
250 # Select configuration backend:
251 # file = text file (e.g., wpa_supplicant.conf; note: the configuration file
252 # path is given on command line, not here; this option is just used to
253 # select the backend that allows configuration files to be used)
254 # winreg = Windows registry (see win_example.reg for an example)
255 CONFIG_BACKEND=file
256
257 # Remove configuration write functionality (i.e., to allow the configuration
258 # file to be updated based on runtime configuration changes). The runtime
259 # configuration can still be changed, the changes are just not going to be
260 # persistent over restarts. This option can be used to reduce code size by
261 # about 3.5 kB.
262 CONFIG_NO_CONFIG_WRITE=y
263
264 # Remove support for configuration blobs to reduce code size by about 1.5 kB.
265 #CONFIG_NO_CONFIG_BLOBS=y
266
267 # Select program entry point implementation:
268 # main = UNIX/POSIX like main() function (default)
269 # main_winsvc = Windows service (read parameters from registry)
270 # main_none = Very basic example (development use only)
271 CONFIG_MAIN=main
272
273 # Select wrapper for operatins system and C library specific functions
274 # unix = UNIX/POSIX like systems (default)
275 # win32 = Windows systems
276 # none = Empty template
277 CONFIG_OS=unix
278
279 # Select event loop implementation
280 # eloop = select() loop (default)
281 # eloop_win = Windows events and WaitForMultipleObject() loop
282 # eloop_none = Empty template
283 CONFIG_ELOOP=eloop
284
285 # Select layer 2 packet implementation
286 # linux = Linux packet socket (default)
287 # pcap = libpcap/libdnet/WinPcap
288 # freebsd = FreeBSD libpcap
289 # winpcap = WinPcap with receive thread
290 # ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
291 # none = Empty template
292 CONFIG_L2_PACKET=linux
293
294 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
295 CONFIG_PEERKEY=y
296
297 # IEEE 802.11w (management frame protection)
298 # This version is an experimental implementation based on IEEE 802.11w/D1.0
299 # draft and is subject to change since the standard has not yet been finalized.
300 # Driver support is also needed for IEEE 802.11w.
301 #CONFIG_IEEE80211W=y
302
303 # Select TLS implementation
304 # openssl = OpenSSL (default)
305 # gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
306 # internal = Internal TLSv1 implementation (experimental)
307 # none = Empty template
308 CONFIG_TLS=internal
309
310 # Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
311 # You need CONFIG_TLS=gnutls for this to have any effect. Please note that
312 # even though the core GnuTLS library is released under LGPL, this extra
313 # library uses GPL and as such, the terms of GPL apply to the combination
314 # of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
315 # apply for distribution of the resulting binary.
316 #CONFIG_GNUTLS_EXTRA=y
317
318 # If CONFIG_TLS=internal is used, additional library and include paths are
319 # needed for LibTomMath. Alternatively, an integrated, minimal version of
320 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
321 # and drawbacks of this option.
322 CONFIG_INTERNAL_LIBTOMMATH=y
323 #ifndef CONFIG_INTERNAL_LIBTOMMATH
324 #LTM_PATH=/usr/src/libtommath-0.39
325 #CFLAGS += -I$(LTM_PATH)
326 #LIBS += -L$(LTM_PATH)
327 #LIBS_p += -L$(LTM_PATH)
328 #endif
329 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
330 # can be configured to include faster routines for exptmod, sqr, and div to
331 # speed up DH and RSA calculation considerably
332 #CONFIG_INTERNAL_LIBTOMMATH_FAST=y
333
334 # Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
335 # This is only for Windows builds and requires WMI-related header files and
336 # WbemUuid.Lib from Platform SDK even when building with MinGW.
337 #CONFIG_NDIS_EVENTS_INTEGRATED=y
338 #PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
339
340 # Add support for DBus control interface
341 #CONFIG_CTRL_IFACE_DBUS=y
342
343 # Add support for loading EAP methods dynamically as shared libraries.
344 # When this option is enabled, each EAP method can be either included
345 # statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
346 # Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
347 # be loaded in the beginning of the wpa_supplicant configuration file
348 # (see load_dynamic_eap parameter in the example file) before being used in
349 # the network blocks.
350 #
351 # Note that some shared parts of EAP methods are included in the main program
352 # and in order to be able to use dynamic EAP methods using these parts, the
353 # main program must have been build with the EAP method enabled (=y or =dyn).
354 # This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
355 # unless at least one of them was included in the main build to force inclusion
356 # of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
357 # in the main build to be able to load these methods dynamically.
358 #
359 # Please also note that using dynamic libraries will increase the total binary
360 # size. Thus, it may not be the best option for targets that have limited
361 # amount of memory/flash.
362 #CONFIG_DYNAMIC_EAP_METHODS=y
363
364 # Include client MLME (management frame processing).
365 # This can be used to move MLME processing of Linux mac80211 stack into user
366 # space. Please note that this is currently only available with
367 # driver_nl80211.c and only with a modified version of Linux kernel and
368 # wpa_supplicant.
369 #CONFIG_CLIENT_MLME=y
370
371 # IEEE Std 802.11r-2008 (Fast BSS Transition)
372 #CONFIG_IEEE80211R=y
373
374 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
375 CONFIG_DEBUG_FILE=y
376
377 # Enable privilege separation (see README 'Privilege separation' for details)
378 #CONFIG_PRIVSEP=y
379
380 # Enable mitigation against certain attacks against TKIP by delaying Michael
381 # MIC error reports by a random amount of time between 0 and 60 seconds
382 #CONFIG_DELAYED_MIC_ERROR_REPORT=y