Apply r12809 to 8.09 branch: Correct /etc/shadow and allow dropbear shadow pwds
[openwrt/svn-archive/archive.git] / package / wpa_supplicant / config
1 # Example wpa_supplicant build time configuration
2 #
3 # This file lists the configuration options that are used when building the
4 # hostapd binary. All lines starting with # are ignored. Configuration option
5 # lines must be commented out complete, if they are not to be included, i.e.,
6 # just setting VARIABLE=n is not disabling that variable.
7 #
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cases, these lines should use += in order not
10 # to override previous values of the variables.
11
12
13 # Uncomment following two lines and fix the paths if you have installed OpenSSL
14 # or GnuTLS in non-default location
15 #CFLAGS += -I/usr/local/openssl/include
16 #LIBS += -L/usr/local/openssl/lib
17
18 # Some Red Hat versions seem to include kerberos header files from OpenSSL, but
19 # the kerberos files are not in the default include path. Following line can be
20 # used to fix build issues on such systems (krb5.h not found).
21 #CFLAGS += -I/usr/include/kerberos
22
23 # Example configuration for various cross-compilation platforms
24
25 #### sveasoft (e.g., for Linksys WRT54G) ######################################
26 #CC=mipsel-uclibc-gcc
27 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
28 #CFLAGS += -Os
29 #CPPFLAGS += -I../src/include -I../../src/router/openssl/include
30 #LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
31 ###############################################################################
32
33 #### openwrt (e.g., for Linksys WRT54G) #######################################
34 #CC=mipsel-uclibc-gcc
35 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
36 #CFLAGS += -Os
37 #CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
38 # -I../WRT54GS/release/src/include
39 #LIBS = -lssl
40 ###############################################################################
41
42
43 # Driver interface for Host AP driver
44 # CONFIG_DRIVER_HOSTAP=y
45
46 # Driver interface for Agere driver
47 #CONFIG_DRIVER_HERMES=y
48 # Change include directories to match with the local setup
49 #CFLAGS += -I../../hcf -I../../include -I../../include/hcf
50 #CFLAGS += -I../../include/wireless
51
52 # Driver interface for madwifi driver
53 CONFIG_DRIVER_MADWIFI=y
54 # Change include directories to match with the local setup
55 #CFLAGS += -I../madwifi/wpa
56
57 # Driver interface for Prism54 driver
58 # (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
59 # for developers only)
60 #CONFIG_DRIVER_PRISM54=y
61
62 # Driver interface for ndiswrapper
63 #CONFIG_DRIVER_NDISWRAPPER=y
64
65 # Driver interface for Atmel driver
66 #CONFIG_DRIVER_ATMEL=y
67
68 # Driver interface for Broadcom driver
69 #CONFIG_DRIVER_BROADCOM=y
70 # Example path for wlioctl.h; change to match your configuration
71 #CFLAGS += -I/opt/WRT54GS/release/src/include
72
73 # Driver interface for Intel ipw2100/2200 driver
74 #CONFIG_DRIVER_IPW=y
75
76 # Driver interface for Ralink driver
77 #CONFIG_DRIVER_RALINK=y
78
79 # Driver interface for generic Linux wireless extensions
80 CONFIG_DRIVER_WEXT=y
81
82 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
83 #CONFIG_DRIVER_BSD=y
84 #CFLAGS += -I/usr/local/include
85 #LIBS += -L/usr/local/lib
86
87 # Driver interface for Windows NDIS
88 #CONFIG_DRIVER_NDIS=y
89 #CFLAGS += -I/usr/include/w32api/ddk
90 #LIBS += -L/usr/local/lib
91 # For native build using mingw
92 #CONFIG_NATIVE_WINDOWS=y
93 # Additional directories for cross-compilation on Linux host for mingw target
94 #CFLAGS += -I/opt/mingw/mingw32/include/ddk
95 #LIBS += -L/opt/mingw/mingw32/lib
96 #CC=mingw32-gcc
97 # By default, driver_ndis uses WinPcap for low-level operations. This can be
98 # replaced with the following option which replaces WinPcap calls with NDISUIO.
99 # However, this requires that WZC is disabled (net stop wzcsvc) before starting
100 # wpa_supplicant.
101 # CONFIG_USE_NDISUIO=y
102
103 # Driver interface for development testing
104 #CONFIG_DRIVER_TEST=y
105
106 # Driver interface for wired Ethernet drivers
107 CONFIG_DRIVER_WIRED=y
108
109 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
110 # included)
111 CONFIG_IEEE8021X_EAPOL=y
112
113 # EAP-MD5
114 CONFIG_EAP_MD5=y
115
116 # EAP-MSCHAPv2
117 CONFIG_EAP_MSCHAPV2=y
118
119 # EAP-TLS
120 CONFIG_EAP_TLS=y
121
122 # EAL-PEAP
123 CONFIG_EAP_PEAP=y
124
125 # EAP-TTLS
126 CONFIG_EAP_TTLS=y
127
128 # EAP-FAST
129 # Note: Default OpenSSL package does not include support for all the
130 # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
131 # the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
132 # to add the needed functions.
133 #CONFIG_EAP_FAST=y
134
135 # EAP-GTC
136 CONFIG_EAP_GTC=y
137
138 # EAP-OTP
139 #CONFIG_EAP_OTP=y
140
141 # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
142 #CONFIG_EAP_SIM=y
143
144 # EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
145 #CONFIG_EAP_PSK=y
146
147 # EAP-PAX
148 #CONFIG_EAP_PAX=y
149
150 # LEAP
151 CONFIG_EAP_LEAP=y
152
153 # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
154 #CONFIG_EAP_AKA=y
155
156 # EAP-SAKE
157 #CONFIG_EAP_SAKE=y
158
159 # EAP-GPSK
160 #CONFIG_EAP_GPSK=y
161 # Include support for optional SHA256 cipher suite in EAP-GPSK
162 #CONFIG_EAP_GPSK_SHA256=y
163
164 # EAP-TNC and related Trusted Network Connect support (experimental)
165 #CONFIG_EAP_TNC=y
166
167 # EAP-IKEv2
168 #CONFIG_EAP_IKEV2=y
169
170 # PKCS#12 (PFX) support (used to read private key and certificate file from
171 # a file that usually has extension .p12 or .pfx)
172 CONFIG_PKCS12=y
173
174 # Smartcard support (i.e., private key on a smartcard), e.g., with openssl
175 # engine.
176 #CONFIG_SMARTCARD=y
177
178 # PC/SC interface for smartcards (USIM, GSM SIM)
179 # Enable this if EAP-SIM or EAP-AKA is included
180 #CONFIG_PCSC=y
181
182 # Development testing
183 #CONFIG_EAPOL_TEST=y
184
185 # Select control interface backend for external programs, e.g, wpa_cli:
186 # unix = UNIX domain sockets (default for Linux/*BSD)
187 # udp = UDP sockets using localhost (127.0.0.1)
188 # named_pipe = Windows Named Pipe (default for Windows)
189 # y = use default (backwards compatibility)
190 # If this option is commented out, control interface is not included in the
191 # build.
192 CONFIG_CTRL_IFACE=y
193
194 # Include support for GNU Readline and History Libraries in wpa_cli.
195 # When building a wpa_cli binary for distribution, please note that these
196 # libraries are licensed under GPL and as such, BSD license may not apply for
197 # the resulting binary.
198 #CONFIG_READLINE=y
199
200 # Remove debugging code that is printing out debug message to stdout.
201 # This can be used to reduce the size of the wpa_supplicant considerably
202 # if debugging code is not needed. The size reduction can be around 35%
203 # (e.g., 90 kB).
204 #CONFIG_NO_STDOUT_DEBUG=y
205
206 # Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
207 # 35-50 kB in code size.
208 #CONFIG_NO_WPA=y
209
210 # Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
211 # save about 1 kB in code size when building only WPA-Personal (no EAP support)
212 # or 6 kB if building for WPA-Enterprise.
213 #CONFIG_NO_WPA2=y
214
215 # Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
216 # This option can be used to reduce code size by removing support for
217 # converting ASCII passphrases into PSK. If this functionality is removed, the
218 # PSK can only be configured as the 64-octet hexstring (e.g., from
219 # wpa_passphrase). This saves about 0.5 kB in code size.
220 #CONFIG_NO_WPA_PASSPHRASE=y
221
222 # Remove AES extra functions. This can be used to reduce code size by about
223 # 1.5 kB by removing extra AES modes that are not needed for commonly used
224 # client configurations (they are needed for some EAP types).
225 #CONFIG_NO_AES_EXTRAS=y
226
227 # Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
228 # This can be used if ap_scan=1 mode is never enabled.
229 #CONFIG_NO_SCAN_PROCESSING=y
230
231 # Select configuration backend:
232 # file = text file (e.g., wpa_supplicant.conf; note: the configuration file
233 # path is given on command line, not here; this option is just used to
234 # select the backend that allows configuration files to be used)
235 # winreg = Windows registry (see win_example.reg for an example)
236 CONFIG_BACKEND=file
237
238 # Remove configuration write functionality (i.e., to allow the configuration
239 # file to be updated based on runtime configuration changes). The runtime
240 # configuration can still be changed, the changes are just not going to be
241 # persistent over restarts. This option can be used to reduce code size by
242 # about 3.5 kB.
243 CONFIG_NO_CONFIG_WRITE=y
244
245 # Remove support for configuration blobs to reduce code size by about 1.5 kB.
246 #CONFIG_NO_CONFIG_BLOBS=y
247
248 # Select program entry point implementation:
249 # main = UNIX/POSIX like main() function (default)
250 # main_winsvc = Windows service (read parameters from registry)
251 # main_none = Very basic example (development use only)
252 CONFIG_MAIN=main
253
254 # Select wrapper for operatins system and C library specific functions
255 # unix = UNIX/POSIX like systems (default)
256 # win32 = Windows systems
257 # none = Empty template
258 CONFIG_OS=unix
259
260 # Select event loop implementation
261 # eloop = select() loop (default)
262 # eloop_win = Windows events and WaitForMultipleObject() loop
263 # eloop_none = Empty template
264 CONFIG_ELOOP=eloop
265
266 # Select layer 2 packet implementation
267 # linux = Linux packet socket (default)
268 # pcap = libpcap/libdnet/WinPcap
269 # freebsd = FreeBSD libpcap
270 # winpcap = WinPcap with receive thread
271 # ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
272 # none = Empty template
273 CONFIG_L2_PACKET=linux
274
275 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
276 CONFIG_PEERKEY=y
277
278 # IEEE 802.11w (management frame protection)
279 # This version is an experimental implementation based on IEEE 802.11w/D1.0
280 # draft and is subject to change since the standard has not yet been finalized.
281 # Driver support is also needed for IEEE 802.11w.
282 #CONFIG_IEEE80211W=y
283
284 # Select TLS implementation
285 # openssl = OpenSSL (default)
286 # gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
287 # internal = Internal TLSv1 implementation (experimental)
288 # none = Empty template
289 CONFIG_TLS=internal
290
291 # Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
292 # You need CONFIG_TLS=gnutls for this to have any effect. Please note that
293 # even though the core GnuTLS library is released under LGPL, this extra
294 # library uses GPL and as such, the terms of GPL apply to the combination
295 # of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
296 # apply for distribution of the resulting binary.
297 #CONFIG_GNUTLS_EXTRA=y
298
299 # If CONFIG_TLS=internal is used, additional library and include paths are
300 # needed for LibTomMath. Alternatively, an integrated, minimal version of
301 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
302 # and drawbacks of this option.
303 CONFIG_INTERNAL_LIBTOMMATH=y
304 #ifndef CONFIG_INTERNAL_LIBTOMMATH
305 #LTM_PATH=/usr/src/libtommath-0.39
306 #CFLAGS += -I$(LTM_PATH)
307 #LIBS += -L$(LTM_PATH)
308 #LIBS_p += -L$(LTM_PATH)
309 #endif
310
311 # Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
312 # This is only for Windows builds and requires WMI-related header files and
313 # WbemUuid.Lib from Platform SDK even when building with MinGW.
314 #CONFIG_NDIS_EVENTS_INTEGRATED=y
315 #PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
316
317 # Add support for DBus control interface
318 #CONFIG_CTRL_IFACE_DBUS=y
319
320 # Add support for loading EAP methods dynamically as shared libraries.
321 # When this option is enabled, each EAP method can be either included
322 # statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
323 # Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
324 # be loaded in the beginning of the wpa_supplicant configuration file
325 # (see load_dynamic_eap parameter in the example file) before being used in
326 # the network blocks.
327 #
328 # Note that some shared parts of EAP methods are included in the main program
329 # and in order to be able to use dynamic EAP methods using these parts, the
330 # main program must have been build with the EAP method enabled (=y or =dyn).
331 # This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
332 # unless at least one of them was included in the main build to force inclusion
333 # of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
334 # in the main build to be able to load these methods dynamically.
335 #
336 # Please also note that using dynamic libraries will increase the total binary
337 # size. Thus, it may not be the best option for targets that have limited
338 # amount of memory/flash.
339 #CONFIG_DYNAMIC_EAP_METHODS=y
340
341 # Include client MLME (management frame processing).
342 # This can be used to move MLME processing of Devicescape IEEE 802.11 stack
343 # into user space.
344 #CONFIG_CLIENT_MLME=y
345 # Currently, driver_devicescape.c build requires some additional parameters
346 # to be able to include some of the kernel header files. Following lines can
347 # be used to set these (WIRELESS_DEV must point to the root directory of the
348 # wireless-dev.git tree).
349 #WIRELESS_DEV=/usr/src/wireless-dev
350 #CFLAGS += -I$(WIRELESS_DEV)/net/mac80211
351
352 # IEEE 802.11r/D4.1 (Fast BSS Transition)
353 # This enables an experimental implementation of a draft version of
354 # IEEE 802.11r. This draft is still subject to change, so it should be noted
355 # that this version may not comply with the final standard.
356 #CONFIG_IEEE80211R=y
357
358 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
359 CONFIG_DEBUG_FILE=y
360
361 # Enable privilege separation (see README 'Privilege separation' for details)
362 #CONFIG_PRIVSEP=y