target/linux/adm5120/files-2.6.26/include/asm-mips/mach-adm5120/adm5120_nand.h

   1 /*
   2  *  ADM5120 NAND interface definitions
   3  *
   4  *  This header file defines the hardware registers of the ADM5120 SoC
   5  *  built-in NAND interface.
   6  *
   7  *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
   8  *
   9  *  NAND interface routines was based on a driver for Linux 2.6.19+ which
  10  *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
  11  *  their RouterBoard 1xx and 5xx series boards.
  12  *    Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
  13  *    Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
  14  *
  15  *  This program is free software; you can redistribute it and/or modify it
  16  *  under the terms of the GNU General Public License version 2 as published
  17  *  by the Free Software Foundation.
  18  *
  19  */
  20
  21 #ifndef _MACH_ADM5120_NAND_H
  22 #define _MACH_ADM5120_NAND_H
  23
  24 #include <linux/types.h>
  25 #include <linux/io.h>
  26
  27 #include <asm/mach-adm5120/adm5120_defs.h>
  28 #include <asm/mach-adm5120/adm5120_switch.h>
  29
  30 /* NAND control registers */
  31 #define NAND_REG_DATA           0x0 /* data register */
  32 #define NAND_REG_SET_CEn        0x1 /* CE# low */
  33 #define NAND_REG_CLR_CEn        0x2 /* CE# high */
  34 #define NAND_REG_CLR_CLE        0x3 /* CLE low */
  35 #define NAND_REG_SET_CLE        0x4 /* CLE high */
  36 #define NAND_REG_CLR_ALE        0x5 /* ALE low */
  37 #define NAND_REG_SET_ALE        0x6 /* ALE high */
  38 #define NAND_REG_SET_SPn        0x7 /* SP# low (use spare area) */
  39 #define NAND_REG_CLR_SPn        0x8 /* SP# high (do not use spare area) */
  40 #define NAND_REG_SET_WPn        0x9 /* WP# low */
  41 #define NAND_REG_CLR_WPn        0xA /* WP# high */
  42 #define NAND_REG_STATUS         0xB /* Status register */
  43
  44 #define ADM5120_NAND_STATUS_READY       0x80
  45
  46 #define NAND_READ_REG(r) \
  47         readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
  48 #define NAND_WRITE_REG(r, v) \
  49         writeb((v),(void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
  50
  51 /*-------------------------------------------------------------------------*/
  52
  53 static inline void adm5120_nand_enable(void)
  54 {
  55         SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE);
  56         SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1);
  57 }
  58
  59 static inline void adm5120_nand_set_wpn(unsigned int set)
  60 {
  61         NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1);
  62 }
  63
  64 static inline void adm5120_nand_set_spn(unsigned int set)
  65 {
  66         NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1);
  67 }
  68
  69 static inline void adm5120_nand_set_cle(unsigned int set)
  70 {
  71         NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1);
  72 }
  73
  74 static inline void adm5120_nand_set_ale(unsigned int set)
  75 {
  76         NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1);
  77 }
  78
  79 static inline void adm5120_nand_set_cen(unsigned int set)
  80 {
  81         NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1);
  82 }
  83
  84 static inline u8 adm5120_nand_get_status(void)
  85 {
  86         return NAND_READ_REG(NAND_REG_STATUS);
  87 }
  88
  89 #endif /* _MACH_ADM5120_NAND_H */