target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.c

   1 /*
   2  *  Mikrotik RouterBOARD 1xx series support
   3  *
   4  *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
   5  *
   6  *  NAND initialization code was based on a driver for Linux 2.6.19+ which
   7  *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
   8  *  their RouterBoard 1xx and 5xx series boards.
   9  *    Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
  10  *    Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
  11  *
  12  *  This program is free software; you can redistribute it and/or modify it
  13  *  under the terms of the GNU General Public License version 2 as published
  14  *  by the Free Software Foundation.
  15  *
  16  */
  17
  18 #include "rb-1xx.h"
  19
  20 #define RB1XX_NAND_CHIP_DELAY   25
  21
  22 #define RB1XX_KEYS_POLL_INTERVAL        20
  23 #define RB1XX_KEYS_DEBOUNCE_INTERVAL    (3 * RB1XX_KEYS_POLL_INTERVAL)
  24
  25 static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = {
  26         PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0),
  27         PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1),
  28         PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2)
  29 };
  30
  31 static struct mtd_partition rb1xx_nor_parts[] = {
  32         {
  33                 .name   = "booter",
  34                 .offset = 0,
  35                 .size   = 64*1024,
  36                 .mask_flags = MTD_WRITEABLE,
  37         } , {
  38                 .name   = "firmware",
  39                 .offset = MTDPART_OFS_APPEND,
  40                 .size   = MTDPART_SIZ_FULL,
  41         }
  42 };
  43
  44 static struct mtd_partition rb1xx_nand_parts[] = {
  45         {
  46                 .name   = "kernel",
  47                 .offset = 0,
  48                 .size   = 4 * 1024 * 1024,
  49         } , {
  50                 .name   = "rootfs",
  51                 .offset = MTDPART_OFS_NXTBLK,
  52                 .size   = MTDPART_SIZ_FULL
  53         }
  54 };
  55
  56 /*
  57  * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
  58  * will not be able to find the kernel that we load.  So set the oobinfo
  59  * when creating the partitions
  60  */
  61 static struct nand_ecclayout rb1xx_nand_ecclayout = {
  62         .eccbytes       = 6,
  63         .eccpos         = { 8, 9, 10, 13, 14, 15 },
  64         .oobavail       = 9,
  65         .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
  66 };
  67
  68 /*--------------------------------------------------------------------------*/
  69
  70 static int rb1xx_nand_fixup(struct mtd_info *mtd)
  71 {
  72         struct nand_chip *chip = mtd->priv;
  73
  74         if (mtd->writesize == 512)
  75                 chip->ecc.layout = &rb1xx_nand_ecclayout;
  76
  77         return 0;
  78 }
  79
  80 struct platform_nand_data rb1xx_nand_data __initdata = {
  81         .chip = {
  82                 .nr_chips       = 1,
  83                 .nr_partitions  = ARRAY_SIZE(rb1xx_nand_parts),
  84                 .partitions     = rb1xx_nand_parts,
  85                 .chip_delay     = RB1XX_NAND_CHIP_DELAY,
  86                 .chip_fixup     = rb1xx_nand_fixup,
  87         },
  88 };
  89
  90 struct gpio_keys_button rb1xx_gpio_buttons[] __initdata = {
  91         {
  92                 .desc           = "reset_button",
  93                 .type           = EV_KEY,
  94                 .code           = KEY_RESTART,
  95                 .debounce_interval = RB1XX_KEYS_DEBOUNCE_INTERVAL,
  96                 .gpio           = ADM5120_GPIO_PIN7,
  97         }
  98 };
  99
 100 static void __init rb1xx_mac_setup(void)
 101 {
 102         if (rb_hs.mac_base != NULL && is_valid_ether_addr(rb_hs.mac_base)) {
 103                 adm5120_setup_eth_macs(rb_hs.mac_base);
 104         } else {
 105                 u8 mac[ETH_ALEN];
 106
 107                 random_ether_addr(mac);
 108                 adm5120_setup_eth_macs(mac);
 109         }
 110 }
 111
 112 void __init rb1xx_add_device_flash(void)
 113 {
 114         /* setup data for flash0 device */
 115         adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts);
 116         adm5120_flash0_data.parts = rb1xx_nor_parts;
 117         adm5120_flash0_data.window_size = 128*1024;
 118
 119         adm5120_add_device_flash(0);
 120 }
 121
 122 void __init rb1xx_add_device_nand(void)
 123 {
 124         /* enable NAND flash interface */
 125         adm5120_nand_enable();
 126
 127         /* initialize NAND chip */
 128         adm5120_nand_set_spn(1);
 129         adm5120_nand_set_wpn(0);
 130
 131         adm5120_add_device_nand(&rb1xx_nand_data);
 132 }
 133
 134 void __init rb1xx_generic_setup(void)
 135 {
 136         if (adm5120_package_bga())
 137                 adm5120_pci_set_irq_map(ARRAY_SIZE(rb1xx_pci_irqs),
 138                                         rb1xx_pci_irqs);
 139
 140         adm5120_add_device_uart(0);
 141         adm5120_add_device_uart(1);
 142
 143         adm5120_register_gpio_buttons(-1, RB1XX_KEYS_POLL_INTERVAL,
 144                                       ARRAY_SIZE(rb1xx_gpio_buttons),
 145                                       rb1xx_gpio_buttons);
 146
 147         rb1xx_add_device_flash();
 148         rb1xx_mac_setup();
 149 }