target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c

   1 /*
   2  *  $Id$
   3  *
   4  *  Edimax boards
   5  *
   6  *  Copyright (C) 2007 OpenWrt.org
   7  *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
   8  *
   9  *  This program is free software; you can redistribute it and/or
  10  *  modify it under the terms of the GNU General Public License
  11  *  as published by the Free Software Foundation; either version 2
  12  *  of the License, or (at your option) any later version.
  13  *
  14  *  This program is distributed in the hope that it will be useful,
  15  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *  GNU General Public License for more details.
  18  *
  19  *  You should have received a copy of the GNU General Public License
  20  *  along with this program; if not, write to the
  21  *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  22  *  Boston, MA  02110-1301, USA.
  23  *
  24  */
  25
  26 #include <linux/kernel.h>
  27 #include <linux/init.h>
  28
  29 #include <asm/bootinfo.h>
  30 #include <asm/gpio.h>
  31
  32 #include <asm/mach-adm5120/adm5120_board.h>
  33 #include <asm/mach-adm5120/adm5120_platform.h>
  34
  35 static struct mtd_partition br6104k_partitions[] = {
  36         {
  37                 .name   = "admboot",
  38                 .offset = 0,
  39                 .size   = 32*1024,
  40                 .mask_flags = MTD_WRITEABLE,
  41         } , {
  42                 .name   = "config",
  43                 .offset = MTDPART_OFS_APPEND,
  44                 .size   = 32*1024,
  45         } , {
  46                 .name   = "firmware",
  47                 .offset = MTDPART_OFS_APPEND,
  48                 .size   = MTDPART_SIZ_FULL,
  49         }
  50 };
  51
  52 static struct platform_device *br6104k_devices[] __initdata = {
  53         &adm5120_flash0_device,
  54 };
  55
  56 static void __init br6104k_setup(void) {
  57         /* setup data for flash0 device */
  58         adm5120_flash0_data.nr_parts = ARRAY_SIZE(br6104k_partitions);
  59         adm5120_flash0_data.parts = br6104k_partitions;
  60
  61         /* TODO: setup mac addresses, if possible */
  62 }
  63
  64 unsigned char br6104k_vlans[6] = {
  65         0x41, 0x42, 0x44, 0x48, 0x50, 0x00
  66 };
  67
  68 static struct adm5120_board br6104k_board __initdata = {
  69         .mach_type      = MACH_ADM5120_BR6104K,
  70         .name           = "Edimax BR-6104K",
  71         .board_setup    = br6104k_setup,
  72         .eth_num_ports  = 5,
  73         .eth_vlans      = br6104k_vlans,
  74         .num_devices    = ARRAY_SIZE(br6104k_devices),
  75         .devices        = br6104k_devices,
  76 };
  77
  78 static int __init register_boards(void)
  79 {
  80         adm5120_board_register(&br6104k_board);
  81         return 0;
  82 }
  83
  84 pure_initcall(register_boards);