ar71xx: add common m25p80 device
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-ap81.c
1 /*
2 * Atheros AP81 board support
3 *
4 * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation.
10 */
11
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/input.h>
16
17 #include <asm/mips_machine.h>
18 #include <asm/mach-ar71xx/ar71xx.h>
19
20 #include "devices.h"
21 #include "dev-m25p80.h"
22
23 #define AP81_GPIO_LED_STATUS 1
24 #define AP81_GPIO_LED_AOSS 3
25 #define AP81_GPIO_LED_WLAN 6
26 #define AP81_GPIO_LED_POWER 14
27
28 #define AP81_GPIO_BTN_SW4 12
29 #define AP81_GPIO_BTN_SW1 21
30
31 #define AP81_BUTTONS_POLL_INTERVAL 20
32
33 #ifdef CONFIG_MTD_PARTITIONS
34 static struct mtd_partition ap81_partitions[] = {
35 {
36 .name = "u-boot",
37 .offset = 0,
38 .size = 0x040000,
39 .mask_flags = MTD_WRITEABLE,
40 } , {
41 .name = "u-boot-env",
42 .offset = 0x040000,
43 .size = 0x010000,
44 } , {
45 .name = "rootfs",
46 .offset = 0x050000,
47 .size = 0x500000,
48 } , {
49 .name = "uImage",
50 .offset = 0x550000,
51 .size = 0x100000,
52 } , {
53 .name = "ART",
54 .offset = 0x650000,
55 .size = 0x1b0000,
56 .mask_flags = MTD_WRITEABLE,
57 }
58 };
59 #endif /* CONFIG_MTD_PARTITIONS */
60
61 static struct flash_platform_data ap81_flash_data = {
62 #ifdef CONFIG_MTD_PARTITIONS
63 .parts = ap81_partitions,
64 .nr_parts = ARRAY_SIZE(ap81_partitions),
65 #endif
66 };
67
68 static struct gpio_led ap81_leds_gpio[] __initdata = {
69 {
70 .name = "ap81:green:status",
71 .gpio = AP81_GPIO_LED_STATUS,
72 .active_low = 1,
73 }, {
74 .name = "ap81:amber:aoss",
75 .gpio = AP81_GPIO_LED_AOSS,
76 .active_low = 1,
77 }, {
78 .name = "ap81:green:wlan",
79 .gpio = AP81_GPIO_LED_WLAN,
80 .active_low = 1,
81 }, {
82 .name = "ap81:green:power",
83 .gpio = AP81_GPIO_LED_POWER,
84 .active_low = 1,
85 }
86 };
87
88 static struct gpio_button ap81_gpio_buttons[] __initdata = {
89 {
90 .desc = "sw1",
91 .type = EV_KEY,
92 .code = BTN_0,
93 .threshold = 5,
94 .gpio = AP81_GPIO_BTN_SW1,
95 .active_low = 1,
96 } , {
97 .desc = "sw4",
98 .type = EV_KEY,
99 .code = BTN_1,
100 .threshold = 5,
101 .gpio = AP81_GPIO_BTN_SW4,
102 .active_low = 1,
103 }
104 };
105
106 static void __init ap81_setup(void)
107 {
108 u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
109
110 ar71xx_set_mac_base(mac);
111 ar71xx_add_device_mdio(0x0);
112
113 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
114 ar71xx_eth0_data.phy_mask = 0xf;
115 ar71xx_eth0_data.speed = SPEED_100;
116 ar71xx_eth0_data.duplex = DUPLEX_FULL;
117 ar71xx_eth0_data.has_ar8216 = 1;
118
119 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
120 ar71xx_eth1_data.phy_mask = 0x10;
121
122 ar71xx_add_device_eth(0);
123 ar71xx_add_device_eth(1);
124
125 ar71xx_add_device_usb();
126
127 ar71xx_add_device_m25p80(&ap81_flash_data);
128
129 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
130 ap81_leds_gpio);
131
132 ar71xx_add_device_gpio_buttons(-1, AP81_BUTTONS_POLL_INTERVAL,
133 ARRAY_SIZE(ap81_gpio_buttons),
134 ap81_gpio_buttons);
135
136 ar91xx_add_device_wmac();
137 }
138
139 MIPS_MACHINE(AR71XX_MACH_AP81, "Atheros AP81", ap81_setup);