[ar71xx] fix a typo
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-ap83.c
1 /*
2 * Atheros AP83 board support
3 *
4 * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation.
10 */
11
12 #include <linux/platform_device.h>
13 #include <linux/input.h>
14
15 #include <asm/mips_machine.h>
16 #include <asm/mach-ar71xx/ar71xx.h>
17 #include <asm/mach-ar71xx/pci.h>
18 #include <asm/mach-ar71xx/platform.h>
19
20 #define AP83_GPIO_LED_WLAN 6
21 #define AP83_GPIO_LED_POWER 14
22 #define AP83_GPIO_LED_JUMPSTART 15
23 #define AP83_GPIO_BTN_JUMPSTART 12
24 #define AP83_GPIO_BTN_RESET 21
25
26 static struct gpio_led ap83_leds_gpio[] __initdata = {
27 {
28 .name = "ap83:green:jumpstart",
29 .gpio = AP83_GPIO_LED_JUMPSTART,
30 .active_low = 0,
31 }, {
32 .name = "ap83:green:power",
33 .gpio = AP83_GPIO_LED_POWER,
34 .active_low = 0,
35 }, {
36 .name = "ap83:green:wlan",
37 .gpio = AP83_GPIO_LED_WLAN,
38 .active_low = 0,
39 },
40 };
41
42 static struct gpio_button ap83_gpio_buttons[] __initdata = {
43 {
44 .desc = "soft_reset",
45 .type = EV_KEY,
46 .code = BTN_0,
47 .threshold = 5,
48 .gpio = AP83_GPIO_BTN_RESET,
49 .active_low = 1,
50 } , {
51 .desc = "jumpstart",
52 .type = EV_KEY,
53 .code = BTN_1,
54 .threshold = 5,
55 .gpio = AP83_GPIO_BTN_JUMPSTART,
56 .active_low = 1,
57 }
58 };
59
60 static void __init ap83_setup(void)
61 {
62 ar71xx_add_device_mdio(0xfffffffe);
63
64 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
65 ar71xx_eth0_data.phy_mask = 0x1;
66
67 ar71xx_add_device_eth(0);
68
69 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
70 ar71xx_eth1_data.phy_mask = 0x0;
71 ar71xx_eth1_data.speed = SPEED_1000;
72 ar71xx_eth1_data.duplex = DUPLEX_FULL;
73
74 ar71xx_add_device_eth(1);
75
76 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
77 ap83_leds_gpio);
78
79 ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(ap83_gpio_buttons),
80 ap83_gpio_buttons);
81
82 ar71xx_add_device_usb();
83 }
84
85 MIPS_MACHINE(AR71XX_MACH_AP83, "Atheros AP83", ap83_setup);