target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c

   1 /*
   2  *  Atheros AP83 board support
   3  *
   4  *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
   5  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify it
   8  *  under the terms of the GNU General Public License version 2 as published
   9  *  by the Free Software Foundation.
  10  */
  11
  12 #include <linux/platform_device.h>
  13 #include <linux/input.h>
  14
  15 #include <asm/mips_machine.h>
  16 #include <asm/mach-ar71xx/ar71xx.h>
  17 #include <asm/mach-ar71xx/pci.h>
  18 #include <asm/mach-ar71xx/platform.h>
  19
  20 #define AP83_GPIO_LED_WLAN      6
  21 #define AP83_GPIO_LED_POWER     14
  22 #define AP83_GPIO_LED_JUMPSTART 15
  23
  24 static struct gpio_led ap83_leds_gpio[] __initdata = {
  25         {
  26                 .name           = "ap83:green:jumpstart",
  27                 .gpio           = AP83_GPIO_LED_JUMPSTART,
  28                 .active_low     = 0,
  29         }, {
  30                 .name           = "ap83:green:power",
  31                 .gpio           = AP83_GPIO_LED_POWER,
  32                 .active_low     = 0,
  33         }, {
  34                 .name           = "ap83:green:wlan",
  35                 .gpio           = AP83_GPIO_LED_WLAN,
  36                 .active_low     = 0,
  37         },
  38 };
  39
  40 static void __init ap83_setup(void)
  41 {
  42         ar71xx_add_device_mdio(0xfffffffe);
  43
  44         ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
  45         ar71xx_eth0_data.phy_mask = 0x1;
  46
  47         ar71xx_add_device_eth(0);
  48
  49         ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
  50         ar71xx_eth1_data.phy_mask = 0x0;
  51         ar71xx_eth1_data.speed = SPEED_1000;
  52         ar71xx_eth1_data.duplex = DUPLEX_FULL;
  53
  54         ar71xx_add_device_eth(1);
  55
  56         ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
  57                                         ap83_leds_gpio);
  58
  59 }
  60
  61 MIPS_MACHINE(AR71XX_MACH_AP83, "Atheros AP83", ap83_setup);