target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-615-c1.c

   1 /*
   2  *  D-Link DIR-615 rev C1 board support
   3  *
   4  *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
   5  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify it
   8  *  under the terms of the GNU General Public License version 2 as published
   9  *  by the Free Software Foundation.
  10  */
  11
  12 #include <linux/mtd/mtd.h>
  13 #include <linux/mtd/partitions.h>
  14
  15 #include <asm/mach-ar71xx/ar71xx.h>
  16
  17 #include "machtype.h"
  18 #include "devices.h"
  19 #include "dev-m25p80.h"
  20 #include "dev-ar913x-wmac.h"
  21 #include "dev-gpio-buttons.h"
  22 #include "dev-leds-gpio.h"
  23
  24 #define DIR_615C1_GPIO_LED_ORANGE_STATUS 1      /* ORANGE:STATUS:TRICOLOR */
  25 #define DIR_615C1_GPIO_LED_BLUE_WPS     3       /* BLUE:WPS */
  26 #define DIR_615C1_GPIO_LED_GREEN_WAN    4       /* GREEN:WAN:TRICOLOR */
  27 #define DIR_615C1_GPIO_LED_GREEN_WANCPU 5       /* GREEN:WAN:CPU:TRICOLOR */
  28 #define DIR_615C1_GPIO_LED_GREEN_WLAN   6       /* GREEN:WLAN */
  29 #define DIR_615C1_GPIO_LED_GREEN_STATUS 14      /* GREEN:STATUS:TRICOLOR */
  30 #define DIR_615C1_GPIO_LED_ORANGE_WAN   15      /* ORANGE:WAN:TRICOLOR */
  31
  32 /* buttons may need refinement */
  33
  34 #define DIR_615C1_GPIO_BTN_WPS          12
  35 #define DIR_615C1_GPIO_BTN_RESET        21
  36
  37 #define DIR_615C1_BUTTONS_POLL_INTERVAL 20
  38
  39 #ifdef CONFIG_MTD_PARTITIONS
  40 static struct mtd_partition dir_615c1_partitions[] = {
  41         {
  42                 .name           = "u-boot",
  43                 .offset         = 0,
  44                 .size           = 0x020000,
  45                 .mask_flags     = MTD_WRITEABLE,
  46         } , {
  47                 .name           = "config",
  48                 .offset         = 0x020000,
  49                 .size           = 0x010000,
  50         } , {
  51                 .name           = "kernel",
  52                 .offset         = 0x030000,
  53                 .size           = 0x0d0000,
  54         } , {
  55                 .name           = "rootfs",
  56                 .offset         = 0x100000,
  57                 .size           = 0x2f0000,
  58         } , {
  59                 .name           = "art",
  60                 .offset         = 0x3f0000,
  61                 .size           = 0x010000,
  62                 .mask_flags     = MTD_WRITEABLE,
  63         } , {
  64                 .name           = "firmware",
  65                 .offset         = 0x030000,
  66                 .size           = 0x3c0000,
  67         }
  68 };
  69 #endif /* CONFIG_MTD_PARTITIONS */
  70
  71 static struct flash_platform_data dir_615c1_flash_data = {
  72 #ifdef CONFIG_MTD_PARTITIONS
  73         .parts          = dir_615c1_partitions,
  74         .nr_parts       = ARRAY_SIZE(dir_615c1_partitions),
  75 #endif
  76 };
  77
  78 static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
  79         {
  80                 .name           = "dir-615c1:orange:status",
  81                 .gpio           = DIR_615C1_GPIO_LED_ORANGE_STATUS,
  82                 .active_low     = 1,
  83         }, {
  84                 .name           = "dir-615c1:blue:wps",
  85                 .gpio           = DIR_615C1_GPIO_LED_BLUE_WPS,
  86                 .active_low     = 1,
  87         }, {
  88                 .name           = "dir-615c1:green:wan",
  89                 .gpio           = DIR_615C1_GPIO_LED_GREEN_WAN,
  90                 .active_low     = 1,
  91         }, {
  92                 .name           = "dir-615c1:green:wancpu",
  93                 .gpio           = DIR_615C1_GPIO_LED_GREEN_WANCPU,
  94                 .active_low     = 1,
  95         }, {
  96                 .name           = "dir-615c1:green:wlan",
  97                 .gpio           = DIR_615C1_GPIO_LED_GREEN_WLAN,
  98                 .active_low     = 1,
  99         }, {
 100                 .name           = "dir-615c1:green:status",
 101                 .gpio           = DIR_615C1_GPIO_LED_GREEN_STATUS,
 102                 .active_low     = 1,
 103         }, {
 104                 .name           = "dir-615c1:orange:wan",
 105                 .gpio           = DIR_615C1_GPIO_LED_ORANGE_WAN,
 106                 .active_low     = 1,
 107         }
 108
 109 };
 110
 111 static struct gpio_button dir_615c1_gpio_buttons[] __initdata = {
 112         {
 113                 .desc           = "reset",
 114                 .type           = EV_KEY,
 115                 .code           = BTN_0,
 116                 .threshold      = 5,
 117                 .gpio           = DIR_615C1_GPIO_BTN_RESET,
 118         }, {
 119                 .desc           = "wps",
 120                 .type           = EV_KEY,
 121                 .code           = BTN_1,
 122                 .threshold      = 5,
 123                 .gpio           = DIR_615C1_GPIO_BTN_WPS,
 124         }
 125 };
 126
 127 static void __init dir_615c1_setup(void)
 128 {
 129         ar71xx_add_device_mdio(0x0);
 130
 131         ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
 132         ar71xx_eth0_data.phy_mask = 0xf;
 133         ar71xx_eth0_data.speed = SPEED_100;
 134         ar71xx_eth0_data.duplex = DUPLEX_FULL;
 135
 136         ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
 137         ar71xx_eth1_data.phy_mask = 0x10;
 138
 139         ar71xx_add_device_eth(0);
 140         ar71xx_add_device_eth(1);
 141
 142         ar71xx_add_device_m25p80(&dir_615c1_flash_data);
 143
 144         ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
 145                                         dir_615c1_leds_gpio);
 146
 147         ar71xx_add_device_gpio_buttons(-1, DIR_615C1_BUTTONS_POLL_INTERVAL,
 148                                         ARRAY_SIZE(dir_615c1_gpio_buttons),
 149                                         dir_615c1_gpio_buttons);
 150
 151         ar913x_add_device_wmac();
 152 }
 153
 154 MIPS_MACHINE(AR71XX_MACH_DIR_615_C1, "D-Link DIR-615 rev. C1", dir_615c1_setup);