ar71xx: move gpio-buttons support into a spearate file
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-tew-632brp.c
1 /*
2 * TrendNET TEW-632BRP board support
3 *
4 * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation.
10 */
11
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15
16 #include <asm/mips_machine.h>
17 #include <asm/mach-ar71xx/ar71xx.h>
18
19 #include "devices.h"
20 #include "dev-m25p80.h"
21 #include "dev-ar913x-wmac.h"
22 #include "dev-gpio-buttons.h"
23 #include "dev-leds-gpio.h"
24
25 #define TEW_632BRP_GPIO_LED_STATUS 1
26 #define TEW_632BRP_GPIO_LED_WPS 3
27 #define TEW_632BRP_GPIO_LED_WLAN 6
28 #define TEW_632BRP_GPIO_BTN_WPS 12
29 #define TEW_632BRP_GPIO_BTN_RESET 21
30
31 #define TEW_632BRP_BUTTONS_POLL_INTERVAL 20
32
33 #ifdef CONFIG_MTD_PARTITIONS
34 static struct mtd_partition tew_632brp_partitions[] = {
35 {
36 .name = "u-boot",
37 .offset = 0,
38 .size = 0x020000,
39 .mask_flags = MTD_WRITEABLE,
40 } , {
41 .name = "config",
42 .offset = 0x020000,
43 .size = 0x010000,
44 } , {
45 .name = "kernel",
46 .offset = 0x030000,
47 .size = 0x0d0000,
48 } , {
49 .name = "rootfs",
50 .offset = 0x100000,
51 .size = 0x2f0000,
52 } , {
53 .name = "art",
54 .offset = 0x3f0000,
55 .size = 0x010000,
56 .mask_flags = MTD_WRITEABLE,
57 } , {
58 .name = "firmware",
59 .offset = 0x030000,
60 .size = 0x3c0000,
61 }
62 };
63 #endif /* CONFIG_MTD_PARTITIONS */
64
65 static struct flash_platform_data tew_632brp_flash_data = {
66 #ifdef CONFIG_MTD_PARTITIONS
67 .parts = tew_632brp_partitions,
68 .nr_parts = ARRAY_SIZE(tew_632brp_partitions),
69 #endif
70 };
71
72 static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
73 {
74 .name = "tew-632brp:green:status",
75 .gpio = TEW_632BRP_GPIO_LED_STATUS,
76 .active_low = 1,
77 }, {
78 .name = "tew-632brp:blue:wps",
79 .gpio = TEW_632BRP_GPIO_LED_WPS,
80 .active_low = 1,
81 }, {
82 .name = "tew-632brp:green:wlan",
83 .gpio = TEW_632BRP_GPIO_LED_WLAN,
84 .active_low = 1,
85 }
86 };
87
88 static struct gpio_button tew_632brp_gpio_buttons[] __initdata = {
89 {
90 .desc = "reset",
91 .type = EV_KEY,
92 .code = BTN_0,
93 .threshold = 5,
94 .gpio = TEW_632BRP_GPIO_BTN_RESET,
95 }, {
96 .desc = "wps",
97 .type = EV_KEY,
98 .code = BTN_1,
99 .threshold = 5,
100 .gpio = TEW_632BRP_GPIO_BTN_WPS,
101 }
102 };
103
104 static void __init tew_632brp_setup(void)
105 {
106 ar71xx_add_device_mdio(0x0);
107
108 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
109 ar71xx_eth0_data.phy_mask = 0xf;
110 ar71xx_eth0_data.speed = SPEED_100;
111 ar71xx_eth0_data.duplex = DUPLEX_FULL;
112
113 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
114 ar71xx_eth1_data.phy_mask = 0x10;
115
116 ar71xx_add_device_eth(0);
117 ar71xx_add_device_eth(1);
118
119 ar71xx_add_device_m25p80(&tew_632brp_flash_data);
120
121 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
122 tew_632brp_leds_gpio);
123
124 ar71xx_add_device_gpio_buttons(-1, TEW_632BRP_BUTTONS_POLL_INTERVAL,
125 ARRAY_SIZE(tew_632brp_gpio_buttons),
126 tew_632brp_gpio_buttons);
127
128 ar913x_add_device_wmac();
129 }
130
131 MIPS_MACHINE(AR71XX_MACH_TEW_632BRP, "TRENDnet TEW-632BRP", tew_632brp_setup);