0ab5f2799561713a134ca84349dc988d7496c7d3
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-tl-wr1043nd.c
1 /*
2 * TP-LINK TL-WR1043ND board support
3 *
4 * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/mtd/mtd.h>
12 #include <linux/mtd/partitions.h>
13
14 #include <asm/mips_machine.h>
15 #include <asm/mach-ar71xx/ar71xx.h>
16
17 #include "devices.h"
18 #include "dev-m25p80.h"
19 #include "dev-ar913x-wmac.h"
20 #include "dev-gpio-buttons.h"
21 #include "dev-leds-gpio.h"
22
23 #define TL_WR1043ND_GPIO_LED_USB 1
24 #define TL_WR1043ND_GPIO_LED_SYSTEM 2
25 #define TL_WR1043ND_GPIO_LED_QSS 5
26 #define TL_WR1043ND_GPIO_LED_WLAN 9
27
28 #define TL_WR1043ND_GPIO_BTN_RESET 3
29 #define TL_WR1043ND_GPIO_BTN_QSS 7
30
31 #define TL_WR1043ND_BUTTONS_POLL_INTERVAL 20
32
33 #ifdef CONFIG_MTD_PARTITIONS
34 static struct mtd_partition tl_wr1043nd_partitions[] = {
35 {
36 .name = "u-boot",
37 .offset = 0,
38 .size = 0x020000,
39 .mask_flags = MTD_WRITEABLE,
40 } , {
41 .name = "kernel",
42 .offset = 0x020000,
43 .size = 0x140000,
44 } , {
45 .name = "rootfs",
46 .offset = 0x160000,
47 .size = 0x690000,
48 } , {
49 .name = "art",
50 .offset = 0x7f0000,
51 .size = 0x010000,
52 .mask_flags = MTD_WRITEABLE,
53 } , {
54 .name = "firmware",
55 .offset = 0x020000,
56 .size = 0x7d0000,
57 }
58 };
59 #endif /* CONFIG_MTD_PARTITIONS */
60
61 static struct flash_platform_data tl_wr1043nd_flash_data = {
62 #ifdef CONFIG_MTD_PARTITIONS
63 .parts = tl_wr1043nd_partitions,
64 .nr_parts = ARRAY_SIZE(tl_wr1043nd_partitions),
65 #endif
66 };
67
68 static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
69 {
70 .name = "tl-wr1043nd:green:usb",
71 .gpio = TL_WR1043ND_GPIO_LED_USB,
72 .active_low = 1,
73 }, {
74 .name = "tl-wr1043nd:green:system",
75 .gpio = TL_WR1043ND_GPIO_LED_SYSTEM,
76 .active_low = 1,
77 }, {
78 .name = "tl-wr1043nd:green:qss",
79 .gpio = TL_WR1043ND_GPIO_LED_QSS,
80 .active_low = 0,
81 }, {
82 .name = "tl-wr1043nd:green:wlan",
83 .gpio = TL_WR1043ND_GPIO_LED_WLAN,
84 .active_low = 1,
85 }
86 };
87
88 static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = {
89 {
90 .desc = "reset",
91 .type = EV_KEY,
92 .code = BTN_0,
93 .threshold = 5,
94 .gpio = TL_WR1043ND_GPIO_BTN_RESET,
95 .active_low = 1,
96 }, {
97 .desc = "qss",
98 .type = EV_KEY,
99 .code = BTN_1,
100 .threshold = 5,
101 .gpio = TL_WR1043ND_GPIO_BTN_QSS,
102 .active_low = 1,
103 }
104 };
105
106 static void __init tl_wr1043nd_setup(void)
107 {
108 u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
109
110 ar71xx_set_mac_base(mac);
111
112 ar71xx_add_device_mdio(0x0);
113
114 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
115 ar71xx_eth0_data.phy_mask = 0x0;
116 ar71xx_eth0_data.speed = SPEED_1000;
117 ar71xx_eth0_data.duplex = DUPLEX_FULL;
118
119 ar71xx_add_device_eth(0);
120
121 ar71xx_add_device_usb();
122
123 ar71xx_add_device_m25p80(&tl_wr1043nd_flash_data);
124
125 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
126 tl_wr1043nd_leds_gpio);
127
128 ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL,
129 ARRAY_SIZE(tl_wr1043nd_gpio_buttons),
130 tl_wr1043nd_gpio_buttons);
131 ar913x_add_device_wmac();
132 }
133
134 MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TP-LINK TL-WR1043ND", tl_wr1043nd_setup);