ar71xx: change mac address initialization
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-tl-wr941nd.c
1 /*
2 * TP-LINK TL-WR941ND board support
3 *
4 * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/mtd/mtd.h>
12 #include <linux/mtd/partitions.h>
13
14 #include <asm/mach-ar71xx/ar71xx.h>
15
16 #include "machtype.h"
17 #include "devices.h"
18 #include "dev-dsa.h"
19 #include "dev-m25p80.h"
20 #include "dev-ar913x-wmac.h"
21 #include "dev-gpio-buttons.h"
22 #include "dev-leds-gpio.h"
23
24 #define TL_WR941ND_GPIO_LED_SYSTEM 2
25 #define TL_WR941ND_GPIO_LED_QSS_RED 4
26 #define TL_WR941ND_GPIO_LED_QSS_GREEN 5
27
28 #define TL_WR941ND_GPIO_BTN_RESET 3
29 #define TL_WR941ND_GPIO_BTN_QSS 7
30
31 #define TL_WR941ND_BUTTONS_POLL_INTERVAL 20
32
33 #ifdef CONFIG_MTD_PARTITIONS
34 static struct mtd_partition tl_wr941nd_partitions[] = {
35 {
36 .name = "u-boot",
37 .offset = 0,
38 .size = 0x020000,
39 .mask_flags = MTD_WRITEABLE,
40 } , {
41 .name = "kernel",
42 .offset = 0x020000,
43 .size = 0x140000,
44 } , {
45 .name = "rootfs",
46 .offset = 0x160000,
47 .size = 0x290000,
48 } , {
49 .name = "art",
50 .offset = 0x3f0000,
51 .size = 0x010000,
52 .mask_flags = MTD_WRITEABLE,
53 } , {
54 .name = "firmware",
55 .offset = 0x020000,
56 .size = 0x3d0000,
57 }
58 };
59 #endif /* CONFIG_MTD_PARTITIONS */
60
61 static struct flash_platform_data tl_wr941nd_flash_data = {
62 #ifdef CONFIG_MTD_PARTITIONS
63 .parts = tl_wr941nd_partitions,
64 .nr_parts = ARRAY_SIZE(tl_wr941nd_partitions),
65 #endif
66 };
67
68 static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
69 {
70 .name = "tl-wr941nd:green:system",
71 .gpio = TL_WR941ND_GPIO_LED_SYSTEM,
72 .active_low = 1,
73 }, {
74 .name = "tl-wr941nd:red:qss",
75 .gpio = TL_WR941ND_GPIO_LED_QSS_RED,
76 }, {
77 .name = "tl-wr941nd:green:qss",
78 .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN,
79 }
80 };
81
82 static struct gpio_button tl_wr941nd_gpio_buttons[] __initdata = {
83 {
84 .desc = "reset",
85 .type = EV_KEY,
86 .code = KEY_RESTART,
87 .threshold = 3,
88 .gpio = TL_WR941ND_GPIO_BTN_RESET,
89 .active_low = 1,
90 }, {
91 .desc = "qss",
92 .type = EV_KEY,
93 .code = KEY_WPS_BUTTON,
94 .threshold = 3,
95 .gpio = TL_WR941ND_GPIO_BTN_QSS,
96 .active_low = 1,
97 }
98 };
99
100 static struct dsa_chip_data tl_wr941nd_dsa_chip = {
101 .port_names[0] = "wan",
102 .port_names[1] = "lan1",
103 .port_names[2] = "lan2",
104 .port_names[3] = "lan3",
105 .port_names[4] = "lan4",
106 .port_names[5] = "cpu",
107 };
108
109 static struct dsa_platform_data tl_wr941nd_dsa_data = {
110 .nr_chips = 1,
111 .chip = &tl_wr941nd_dsa_chip,
112 };
113
114 static void __init tl_wr941nd_setup(void)
115 {
116 u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
117 u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
118
119 ar71xx_add_device_mdio(0x0);
120
121 ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
122 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
123 ar71xx_eth0_data.speed = SPEED_100;
124 ar71xx_eth0_data.duplex = DUPLEX_FULL;
125
126 ar71xx_add_device_eth(0);
127 ar71xx_add_device_dsa(0, &tl_wr941nd_dsa_data);
128
129 ar71xx_add_device_m25p80(&tl_wr941nd_flash_data);
130
131 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
132 tl_wr941nd_leds_gpio);
133
134 ar71xx_add_device_gpio_buttons(-1, TL_WR941ND_BUTTONS_POLL_INTERVAL,
135 ARRAY_SIZE(tl_wr941nd_gpio_buttons),
136 tl_wr941nd_gpio_buttons);
137 ar913x_add_device_wmac(eeprom, mac);
138 }
139
140 MIPS_MACHINE(AR71XX_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND",
141 tl_wr941nd_setup);