ar71xx: add common m25p80 device
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-tl-wr941nd.c
1 /*
2 * TP-LINK TL-WR941ND board support
3 *
4 * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/platform_device.h>
12 #include <linux/mtd/mtd.h>
13 #include <linux/mtd/partitions.h>
14 #include <linux/input.h>
15
16 #include <asm/mips_machine.h>
17
18 #include <asm/mach-ar71xx/ar71xx.h>
19
20 #include "devices.h"
21 #include "dev-m25p80.h"
22
23 #define TL_WR941ND_GPIO_LED_SYSTEM 2
24 #define TL_WR941ND_GPIO_LED_QSS 5
25
26 #define TL_WR941ND_GPIO_BTN_RESET 3
27 #define TL_WR941ND_GPIO_BTN_QSS 7
28
29 #define TL_WR941ND_BUTTONS_POLL_INTERVAL 20
30
31 #ifdef CONFIG_MTD_PARTITIONS
32 static struct mtd_partition tl_wr941nd_partitions[] = {
33 {
34 .name = "u-boot",
35 .offset = 0,
36 .size = 0x020000,
37 .mask_flags = MTD_WRITEABLE,
38 } , {
39 .name = "kernel",
40 .offset = 0x020000,
41 .size = 0x140000,
42 } , {
43 .name = "rootfs",
44 .offset = 0x160000,
45 .size = 0x290000,
46 } , {
47 .name = "art",
48 .offset = 0x3f0000,
49 .size = 0x010000,
50 .mask_flags = MTD_WRITEABLE,
51 } , {
52 .name = "firmware",
53 .offset = 0x020000,
54 .size = 0x3d0000,
55 }
56 };
57 #endif /* CONFIG_MTD_PARTITIONS */
58
59 static struct flash_platform_data tl_wr941nd_flash_data = {
60 #ifdef CONFIG_MTD_PARTITIONS
61 .parts = tl_wr941nd_partitions,
62 .nr_parts = ARRAY_SIZE(tl_wr941nd_partitions),
63 #endif
64 };
65
66 static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
67 {
68 .name = "tl-wr941nd:green:system",
69 .gpio = TL_WR941ND_GPIO_LED_SYSTEM,
70 .active_low = 1,
71 }, {
72 .name = "tl-wr941nd:red:qss",
73 .gpio = TL_WR941ND_GPIO_LED_QSS,
74 .active_low = 1,
75 }
76 };
77
78 static struct gpio_button tl_wr941nd_gpio_buttons[] __initdata = {
79 {
80 .desc = "reset",
81 .type = EV_KEY,
82 .code = BTN_0,
83 .threshold = 5,
84 .gpio = TL_WR941ND_GPIO_BTN_RESET,
85 .active_low = 1,
86 }, {
87 .desc = "qss",
88 .type = EV_KEY,
89 .code = BTN_1,
90 .threshold = 5,
91 .gpio = TL_WR941ND_GPIO_BTN_QSS,
92 .active_low = 1,
93 }
94 };
95
96 static struct dsa_chip_data tl_wr941nd_dsa_chip = {
97 .port_names[0] = "wan",
98 .port_names[1] = "lan1",
99 .port_names[2] = "lan2",
100 .port_names[3] = "lan3",
101 .port_names[4] = "lan4",
102 .port_names[5] = "cpu",
103 };
104
105 static struct dsa_platform_data tl_wr941nd_dsa_data = {
106 .nr_chips = 1,
107 .chip = &tl_wr941nd_dsa_chip,
108 };
109
110 static void __init tl_wr941nd_setup(void)
111 {
112 u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
113
114 ar71xx_set_mac_base(mac);
115
116 ar71xx_add_device_mdio(0x0);
117
118 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
119 ar71xx_eth0_data.phy_mask = 0x0;
120 ar71xx_eth0_data.speed = SPEED_100;
121 ar71xx_eth0_data.duplex = DUPLEX_FULL;
122
123 ar71xx_add_device_eth(0);
124 ar71xx_add_device_dsa(0, &tl_wr941nd_dsa_data);
125
126 ar71xx_add_device_m25p80(&tl_wr941nd_flash_data);
127
128 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
129 tl_wr941nd_leds_gpio);
130
131 ar71xx_add_device_gpio_buttons(-1, TL_WR941ND_BUTTONS_POLL_INTERVAL,
132 ARRAY_SIZE(tl_wr941nd_gpio_buttons),
133 tl_wr941nd_gpio_buttons);
134 ar91xx_add_device_wmac();
135 }
136
137 MIPS_MACHINE(AR71XX_MACH_TL_WR941ND, "TP-LINK TL-WR941ND", tl_wr941nd_setup);