target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c

   1 /*
   2  *  D-Link DIR-825 rev. B1 board support
   3  *
   4  *  Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
   5  *
   6  *  based on mach-wndr3700.c
   7  *
   8  *  This program is free software; you can redistribute it and/or modify it
   9  *  under the terms of the GNU General Public License version 2 as published
  10  *  by the Free Software Foundation.
  11  */
  12
  13 #include <linux/platform_device.h>
  14 #include <linux/delay.h>
  15 #include <linux/rtl8366.h>
  16
  17 #include <asm/mach-ath79/ath79.h>
  18
  19 #include "dev-eth.h"
  20 #include "dev-ap9x-pci.h"
  21 #include "dev-gpio-buttons.h"
  22 #include "dev-leds-gpio.h"
  23 #include "dev-m25p80.h"
  24 #include "dev-usb.h"
  25 #include "machtypes.h"
  26
  27 #define DIR825B1_GPIO_LED_BLUE_USB              0
  28 #define DIR825B1_GPIO_LED_ORANGE_POWER          1
  29 #define DIR825B1_GPIO_LED_BLUE_POWER            2
  30 #define DIR825B1_GPIO_LED_BLUE_WPS              4
  31 #define DIR825B1_GPIO_LED_ORANGE_PLANET         6
  32 #define DIR825B1_GPIO_LED_BLUE_PLANET           11
  33
  34 #define DIR825B1_GPIO_BTN_RESET                 3
  35 #define DIR825B1_GPIO_BTN_WPS                   8
  36
  37 #define DIR825B1_GPIO_RTL8366_SDA               5
  38 #define DIR825B1_GPIO_RTL8366_SCK               7
  39
  40 #define DIR825B1_KEYS_POLL_INTERVAL             20      /* msecs */
  41 #define DIR825B1_KEYS_DEBOUNCE_INTERVAL         (3 * DIR825B1_KEYS_POLL_INTERVAL)
  42
  43 #define DIR825B1_CAL0_OFFSET                    0x1000
  44 #define DIR825B1_CAL1_OFFSET                    0x5000
  45 #define DIR825B1_MAC0_OFFSET                    0xffa0
  46 #define DIR825B1_MAC1_OFFSET                    0xffb4
  47
  48 #define DIR825B1_CAL_LOCATION_0                 0x1f660000
  49 #define DIR825B1_CAL_LOCATION_1                 0x1f7f0000
  50
  51 static struct gpio_led dir825b1_leds_gpio[] __initdata = {
  52         {
  53                 .name           = "d-link:blue:usb",
  54                 .gpio           = DIR825B1_GPIO_LED_BLUE_USB,
  55                 .active_low     = 1,
  56         }, {
  57                 .name           = "d-link:orange:power",
  58                 .gpio           = DIR825B1_GPIO_LED_ORANGE_POWER,
  59                 .active_low     = 1,
  60         }, {
  61                 .name           = "d-link:blue:power",
  62                 .gpio           = DIR825B1_GPIO_LED_BLUE_POWER,
  63                 .active_low     = 1,
  64         }, {
  65                 .name           = "d-link:blue:wps",
  66                 .gpio           = DIR825B1_GPIO_LED_BLUE_WPS,
  67                 .active_low     = 1,
  68         }, {
  69                 .name           = "d-link:orange:planet",
  70                 .gpio           = DIR825B1_GPIO_LED_ORANGE_PLANET,
  71                 .active_low     = 1,
  72         }, {
  73                 .name           = "d-link:blue:planet",
  74                 .gpio           = DIR825B1_GPIO_LED_BLUE_PLANET,
  75                 .active_low     = 1,
  76         }
  77 };
  78
  79 static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = {
  80         {
  81                 .desc           = "reset",
  82                 .type           = EV_KEY,
  83                 .code           = KEY_RESTART,
  84                 .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
  85                 .gpio           = DIR825B1_GPIO_BTN_RESET,
  86                 .active_low     = 1,
  87         }, {
  88                 .desc           = "wps",
  89                 .type           = EV_KEY,
  90                 .code           = KEY_WPS_BUTTON,
  91                 .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
  92                 .gpio           = DIR825B1_GPIO_BTN_WPS,
  93                 .active_low     = 1,
  94         }
  95 };
  96
  97 static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = {
  98         { .reg = 0x06, .val = 0x0108 },
  99 };
 100
 101 static struct rtl8366_platform_data dir825b1_rtl8366s_data = {
 102         .gpio_sda       = DIR825B1_GPIO_RTL8366_SDA,
 103         .gpio_sck       = DIR825B1_GPIO_RTL8366_SCK,
 104         .num_initvals   = ARRAY_SIZE(dir825b1_rtl8366s_initvals),
 105         .initvals       = dir825b1_rtl8366s_initvals,
 106 };
 107
 108 static struct platform_device dir825b1_rtl8366s_device = {
 109         .name           = RTL8366S_DRIVER_NAME,
 110         .id             = -1,
 111         .dev = {
 112                 .platform_data  = &dir825b1_rtl8366s_data,
 113         }
 114 };
 115
 116 static void dir825b1_read_ascii_mac(u8 *dest, u8 *src)
 117 {
 118         int ret;
 119
 120         ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
 121                      &dest[0], &dest[1], &dest[2],
 122                      &dest[3], &dest[4], &dest[5]);
 123
 124         if (ret != ETH_ALEN)
 125                 memset(dest, 0, ETH_ALEN);
 126 }
 127
 128 static bool __init dir825b1_is_caldata_valid(u8 *p)
 129 {
 130         u16 *magic0, *magic1;
 131
 132         magic0 = (u16 *)(p + DIR825B1_CAL0_OFFSET);
 133         magic1 = (u16 *)(p + DIR825B1_CAL1_OFFSET);
 134
 135         return (*magic0 == 0xa55a && *magic1 == 0xa55a);
 136 }
 137
 138 static void __init dir825b1_wlan_init(void)
 139 {
 140         u8 *caldata;
 141         u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
 142
 143         caldata = (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0);
 144         if (!dir825b1_is_caldata_valid(caldata)) {
 145                 caldata = (u8 *)KSEG1ADDR(DIR825B1_CAL_LOCATION_1);
 146                 if (!dir825b1_is_caldata_valid(caldata)) {
 147                         pr_err("no calibration data found\n");
 148                         return;
 149                 }
 150         }
 151
 152         dir825b1_read_ascii_mac(mac1, caldata + DIR825B1_MAC0_OFFSET);
 153         dir825b1_read_ascii_mac(mac2, caldata + DIR825B1_MAC1_OFFSET);
 154
 155         ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
 156         ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
 157
 158         ap9x_pci_setup_wmac_led_pin(0, 5);
 159         ap9x_pci_setup_wmac_led_pin(1, 5);
 160
 161         ap94_pci_init(caldata + DIR825B1_CAL0_OFFSET, mac1,
 162                       caldata + DIR825B1_CAL1_OFFSET, mac2);
 163 }
 164
 165 static void __init dir825b1_setup(void)
 166 {
 167         dir825b1_wlan_init();
 168
 169         ath79_register_mdio(0, 0x0);
 170
 171         ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
 172         ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 173         ath79_eth0_data.speed = SPEED_1000;
 174         ath79_eth0_data.duplex = DUPLEX_FULL;
 175         ath79_eth0_pll_data.pll_1000 = 0x11110000;
 176
 177         ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
 178         ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 179         ath79_eth1_data.phy_mask = 0x10;
 180         ath79_eth1_pll_data.pll_1000 = 0x11110000;
 181
 182         ath79_register_eth(0);
 183         ath79_register_eth(1);
 184
 185         ath79_register_m25p80(NULL);
 186
 187         ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
 188                                  dir825b1_leds_gpio);
 189
 190         ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL,
 191                                         ARRAY_SIZE(dir825b1_gpio_keys),
 192                                         dir825b1_gpio_keys);
 193
 194         ath79_register_usb();
 195
 196         platform_device_register(&dir825b1_rtl8366s_device);
 197 }
 198
 199 MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
 200              dir825b1_setup);