target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c

   1 /*
   2  *  MikroTik RouterBOARD 2011 support
   3  *
   4  *  Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
   5  *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify it
   8  *  under the terms of the GNU General Public License version 2 as published
   9  *  by the Free Software Foundation.
  10  */
  11
  12 #define pr_fmt(fmt) "rb2011: " fmt
  13
  14 #include <linux/phy.h>
  15 #include <linux/delay.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/ath9k_platform.h>
  18 #include <linux/ar8216_platform.h>
  19 #include <linux/mtd/mtd.h>
  20 #include <linux/mtd/nand.h>
  21 #include <linux/mtd/partitions.h>
  22 #include <linux/spi/spi.h>
  23 #include <linux/spi/flash.h>
  24 #include <linux/rle.h>
  25 #include <linux/routerboot.h>
  26 #include <linux/gpio.h>
  27
  28 #include <asm/mach-ath79/ath79.h>
  29 #include <asm/mach-ath79/ar71xx_regs.h>
  30
  31 #include "common.h"
  32 #include "dev-eth.h"
  33 #include "dev-m25p80.h"
  34 #include "dev-nfc.h"
  35 #include "dev-wmac.h"
  36 #include "machtypes.h"
  37 #include "routerboot.h"
  38
  39 #define RB2011_GPIO_NAND_NCE    14
  40
  41 #define RB_ROUTERBOOT_OFFSET    0x0000
  42 #define RB_ROUTERBOOT_SIZE      0xb000
  43 #define RB_HARD_CFG_OFFSET      0xb000
  44 #define RB_HARD_CFG_SIZE        0x1000
  45 #define RB_BIOS_OFFSET          0xd000
  46 #define RB_BIOS_SIZE            0x2000
  47 #define RB_SOFT_CFG_OFFSET      0xf000
  48 #define RB_SOFT_CFG_SIZE        0x1000
  49
  50 #define RB_ART_SIZE             0x10000
  51
  52 static struct mtd_partition rb2011_spi_partitions[] = {
  53         {
  54                 .name           = "routerboot",
  55                 .offset         = RB_ROUTERBOOT_OFFSET,
  56                 .size           = RB_ROUTERBOOT_SIZE,
  57                 .mask_flags     = MTD_WRITEABLE,
  58         }, {
  59                 .name           = "hard_config",
  60                 .offset         = RB_HARD_CFG_OFFSET,
  61                 .size           = RB_HARD_CFG_SIZE,
  62                 .mask_flags     = MTD_WRITEABLE,
  63         }, {
  64                 .name           = "bios",
  65                 .offset         = RB_BIOS_OFFSET,
  66                 .size           = RB_BIOS_SIZE,
  67                 .mask_flags     = MTD_WRITEABLE,
  68         }, {
  69                 .name           = "soft_config",
  70                 .offset         = RB_SOFT_CFG_OFFSET,
  71                 .size           = RB_SOFT_CFG_SIZE,
  72         }
  73 };
  74
  75 static struct mtd_partition rb2011_nand_partitions[] = {
  76         {
  77                 .name   = "booter",
  78                 .offset = 0,
  79                 .size   = (256 * 1024),
  80                 .mask_flags = MTD_WRITEABLE,
  81         },
  82         {
  83                 .name   = "kernel",
  84                 .offset = (256 * 1024),
  85                 .size   = (4 * 1024 * 1024) - (256 * 1024),
  86         },
  87         {
  88                 .name   = "rootfs",
  89                 .offset = MTDPART_OFS_NXTBLK,
  90                 .size   = MTDPART_SIZ_FULL,
  91         },
  92 };
  93
  94 static struct flash_platform_data rb2011_spi_flash_data = {
  95         .parts          = rb2011_spi_partitions,
  96         .nr_parts       = ARRAY_SIZE(rb2011_spi_partitions),
  97 };
  98
  99 static struct ar8327_pad_cfg rb2011_ar8327_pad0_cfg = {
 100         .mode = AR8327_PAD_MAC_RGMII,
 101         .txclk_delay_en = true,
 102         .rxclk_delay_en = true,
 103         .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
 104         .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
 105 };
 106
 107 static struct ar8327_platform_data rb2011_ar8327_data = {
 108         .pad0_cfg = &rb2011_ar8327_pad0_cfg,
 109         .cpuport_cfg = {
 110                 .force_link = 1,
 111                 .speed = AR8327_PORT_SPEED_1000,
 112                 .duplex = 1,
 113                 .txpause = 1,
 114                 .rxpause = 1,
 115         }
 116 };
 117
 118 static struct mdio_board_info rb2011_mdio0_info[] = {
 119         {
 120                 .bus_id = "ag71xx-mdio.0",
 121                 .phy_addr = 0,
 122                 .platform_data = &rb2011_ar8327_data,
 123         },
 124 };
 125
 126 static void __init rb2011_gmac_setup(void)
 127 {
 128         void __iomem *base;
 129         u32 t;
 130
 131         base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
 132
 133         t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
 134         t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
 135                 AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
 136         t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE;
 137
 138         __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
 139
 140         iounmap(base);
 141 }
 142
 143 static void __init rb2011_wlan_init(void)
 144 {
 145         u8 *hard_cfg = (u8 *) KSEG1ADDR(0x1f000000 + RB_HARD_CFG_OFFSET);
 146         u16 tag_len;
 147         u8 *tag;
 148         char *art_buf;
 149         u8 wlan_mac[ETH_ALEN];
 150         int err;
 151
 152         err = routerboot_find_tag(hard_cfg, RB_HARD_CFG_SIZE, RB_ID_WLAN_DATA,
 153                                   &tag, &tag_len);
 154         if (err) {
 155                 pr_err("no calibration data found\n");
 156                 return;
 157         }
 158
 159         art_buf = kmalloc(RB_ART_SIZE, GFP_KERNEL);
 160         if (art_buf == NULL) {
 161                 pr_err("no memory for calibration data\n");
 162                 return;
 163         }
 164
 165         err = rle_decode((char *) tag, tag_len, art_buf, RB_ART_SIZE,
 166                          NULL, NULL);
 167         if (err) {
 168                 pr_err("unable to decode calibration data\n");
 169                 goto free;
 170         }
 171
 172         ath79_init_mac(wlan_mac, ath79_mac_base, 11);
 173         ath79_register_wmac(art_buf + 0x1000, wlan_mac);
 174
 175 free:
 176         kfree(art_buf);
 177 }
 178
 179 static void rb2011_nand_select_chip(int chip_no)
 180 {
 181         switch (chip_no) {
 182         case 0:
 183                 gpio_set_value(RB2011_GPIO_NAND_NCE, 0);
 184                 break;
 185         default:
 186                 gpio_set_value(RB2011_GPIO_NAND_NCE, 1);
 187                 break;
 188         }
 189         ndelay(500);
 190 }
 191
 192 static struct nand_ecclayout rb2011_nand_ecclayout = {
 193         .eccbytes       = 6,
 194         .eccpos         = { 8, 9, 10, 13, 14, 15 },
 195         .oobavail       = 9,
 196         .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
 197 };
 198
 199 static int rb2011_nand_scan_fixup(struct mtd_info *mtd)
 200 {
 201         struct nand_chip *chip = mtd->priv;
 202
 203         if (mtd->writesize == 512) {
 204                 /*
 205                  * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
 206                  * will not be able to find the kernel that we load.
 207                  */
 208                 chip->ecc.layout = &rb2011_nand_ecclayout;
 209         }
 210
 211         return 0;
 212 }
 213
 214 static void __init rb2011_nand_init(void)
 215 {
 216         ath79_nfc_set_scan_fixup(rb2011_nand_scan_fixup);
 217         ath79_nfc_set_parts(rb2011_nand_partitions,
 218                             ARRAY_SIZE(rb2011_nand_partitions));
 219         ath79_nfc_set_select_chip(rb2011_nand_select_chip);
 220         ath79_register_nfc();
 221 }
 222
 223 static void __init rb2011_gpio_init(void)
 224 {
 225         gpio_request_one(RB2011_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
 226 }
 227
 228 static void __init rb2011_setup(void)
 229 {
 230         rb2011_gpio_init();
 231
 232         ath79_register_m25p80(&rb2011_spi_flash_data);
 233         rb2011_nand_init();
 234
 235         rb2011_gmac_setup();
 236
 237         ath79_register_mdio(1, 0x0);
 238         ath79_register_mdio(0, 0x0);
 239
 240         mdiobus_register_board_info(rb2011_mdio0_info,
 241                                     ARRAY_SIZE(rb2011_mdio0_info));
 242
 243         /* GMAC0 is connected to an ar8327 switch */
 244         ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
 245         ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 246         ath79_eth0_data.phy_mask = BIT(0);
 247         ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
 248         ath79_eth0_pll_data.pll_1000 = 0x06000000;
 249
 250         ath79_register_eth(0);
 251
 252         /* GMAC1 is connected to the internal switch */
 253         ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 5);
 254         ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
 255         ath79_eth1_data.speed = SPEED_1000;
 256         ath79_eth1_data.duplex = DUPLEX_FULL;
 257
 258         ath79_register_eth(1);
 259 }
 260
 261 MIPS_MACHINE(ATH79_MACH_RB_2011L, "2011L", "MikroTik RouterBOARD 2011L",
 262              rb2011_setup);
 263
 264 static void __init rb2011g_setup(void)
 265 {
 266         rb2011_setup();
 267         rb2011_wlan_init();
 268 }
 269
 270 MIPS_MACHINE(ATH79_MACH_RB_2011G, "2011G", "MikroTik RouterBOARD 2011UAS-2HnD",
 271              rb2011g_setup);