ar71xx: add board support for ubnt loco m xw
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / patches-3.10 / 616-MIPS-ath79-ubnt-xw.patch
1 --- a/arch/mips/ath79/mach-ubnt-xm.c
2 +++ b/arch/mips/ath79/mach-ubnt-xm.c
3 @@ -332,3 +332,78 @@ static void __init ubnt_uap_pro_setup(vo
4 MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
5 ubnt_uap_pro_setup);
6
7 +#define UBNT_XW_GPIO_LED_L1 11
8 +#define UBNT_XW_GPIO_LED_L2 16
9 +#define UBNT_XW_GPIO_LED_L3 13
10 +#define UBNT_XW_GPIO_LED_L4 14
11 +
12 +static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
13 + {
14 + .name = "ubnt:red:link1",
15 + .gpio = UBNT_XW_GPIO_LED_L1,
16 + .active_low = 1,
17 + }, {
18 + .name = "ubnt:orange:link2",
19 + .gpio = UBNT_XW_GPIO_LED_L2,
20 + .active_low = 1,
21 + }, {
22 + .name = "ubnt:green:link3",
23 + .gpio = UBNT_XW_GPIO_LED_L3,
24 + .active_low = 1,
25 + }, {
26 + .name = "ubnt:green:link4",
27 + .gpio = UBNT_XW_GPIO_LED_L4,
28 + .active_low = 1,
29 + },
30 +};
31 +
32 +static void __init ubnt_xw_init(void)
33 +{
34 + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
35 +
36 + ath79_register_m25p80(NULL);
37 +
38 + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
39 + ubnt_xw_leds_gpio);
40 + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
41 + ARRAY_SIZE(ubnt_xm_gpio_keys),
42 + ubnt_xm_gpio_keys);
43 +
44 + ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
45 + ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
46 +
47 +
48 + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
49 + ath79_init_mac(ath79_eth0_data.mac_addr,
50 + eeprom + UAP_PRO_MAC0_OFFSET, 0);
51 +
52 + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
53 + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
54 +}
55 +
56 +static void __init ubnt_nano_m_xw_setup(void)
57 +{
58 + ubnt_xw_init();
59 +
60 + /* GMAC0 is connected to an AR8326 switch */
61 + ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
62 + ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
63 + ath79_eth0_data.speed = SPEED_100;
64 + ath79_eth0_data.duplex = DUPLEX_FULL;
65 + ath79_register_eth(0);
66 +}
67 +
68 +static void __init ubnt_loco_m_xw_setup(void)
69 +{
70 + ubnt_xw_init();
71 +
72 + ath79_register_mdio(0, ~BIT(1));
73 + ath79_eth0_data.phy_mask = BIT(1);
74 + ath79_register_eth(0);
75 +}
76 +
77 +MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
78 + ubnt_nano_m_xw_setup);
79 +
80 +MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
81 + ubnt_loco_m_xw_setup);
82 --- a/arch/mips/ath79/machtypes.h
83 +++ b/arch/mips/ath79/machtypes.h
84 @@ -121,9 +121,11 @@ enum ath79_mach_type {
85 ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
86 ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
87 ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
88 + ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */
89 ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
90 ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
91 ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
92 + ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */
93 ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
94 ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
95 ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */