ar71xx: add preliminary support for Mikrotik RB2011L
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / patches-3.3 / 000-USB-OHCI-Add-a-generic-platform-device-driver.patch
1 From be77ba57151bd35ce63ccf52d74b6c626fa73817 Mon Sep 17 00:00:00 2001
2 From: Hauke Mehrtens <hauke@hauke-m.de>
3 Date: Tue, 13 Mar 2012 01:04:47 +0100
4 Subject: [PATCH 01/47] USB: OHCI: Add a generic platform device driver
5
6 This adds a generic driver for platform devices. It works like the PCI
7 driver and is based on it. This is for devices which do not have an own
8 bus but their OHCI controller works like a PCI controller. It will be
9 used for the Broadcom bcma and ssb USB OHCI controller.
10
11 Acked-by: Alan Stern <stern@rowland.harvard.edu>
12 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
13 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
14 ---
15 drivers/usb/host/Kconfig | 10 ++
16 drivers/usb/host/ohci-hcd.c | 5 +
17 drivers/usb/host/ohci-platform.c | 194 ++++++++++++++++++++++++++++++++++++++
18 include/linux/usb/ohci_pdriver.h | 38 ++++++++
19 4 files changed, 247 insertions(+), 0 deletions(-)
20 create mode 100644 drivers/usb/host/ohci-platform.c
21 create mode 100644 include/linux/usb/ohci_pdriver.h
22
23 --- a/drivers/usb/host/Kconfig
24 +++ b/drivers/usb/host/Kconfig
25 @@ -393,6 +393,16 @@ config USB_CNS3XXX_OHCI
26 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
27 It is needed for low-speed USB 1.0 device support.
28
29 +config USB_OHCI_HCD_PLATFORM
30 + bool "Generic OHCI driver for a platform device"
31 + depends on USB_OHCI_HCD && EXPERIMENTAL
32 + default n
33 + ---help---
34 + Adds an OHCI host driver for a generic platform device, which
35 + provieds a memory space and an irq.
36 +
37 + If unsure, say N.
38 +
39 config USB_OHCI_BIG_ENDIAN_DESC
40 bool
41 depends on USB_OHCI_HCD
42 --- a/drivers/usb/host/ohci-hcd.c
43 +++ b/drivers/usb/host/ohci-hcd.c
44 @@ -1121,6 +1121,11 @@ MODULE_LICENSE ("GPL");
45 #define PLATFORM_DRIVER ohci_xls_driver
46 #endif
47
48 +#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
49 +#include "ohci-platform.c"
50 +#define PLATFORM_DRIVER ohci_platform_driver
51 +#endif
52 +
53 #if !defined(PCI_DRIVER) && \
54 !defined(PLATFORM_DRIVER) && \
55 !defined(OMAP1_PLATFORM_DRIVER) && \
56 --- /dev/null
57 +++ b/drivers/usb/host/ohci-platform.c
58 @@ -0,0 +1,194 @@
59 +/*
60 + * Generic platform ohci driver
61 + *
62 + * Copyright 2007 Michael Buesch <m@bues.ch>
63 + * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
64 + *
65 + * Derived from the OCHI-SSB driver
66 + * Derived from the OHCI-PCI driver
67 + * Copyright 1999 Roman Weissgaerber
68 + * Copyright 2000-2002 David Brownell
69 + * Copyright 1999 Linus Torvalds
70 + * Copyright 1999 Gregory P. Smith
71 + *
72 + * Licensed under the GNU/GPL. See COPYING for details.
73 + */
74 +#include <linux/platform_device.h>
75 +#include <linux/usb/ohci_pdriver.h>
76 +
77 +static int ohci_platform_reset(struct usb_hcd *hcd)
78 +{
79 + struct platform_device *pdev = to_platform_device(hcd->self.controller);
80 + struct usb_ohci_pdata *pdata = pdev->dev.platform_data;
81 + struct ohci_hcd *ohci = hcd_to_ohci(hcd);
82 + int err;
83 +
84 + if (pdata->big_endian_desc)
85 + ohci->flags |= OHCI_QUIRK_BE_DESC;
86 + if (pdata->big_endian_mmio)
87 + ohci->flags |= OHCI_QUIRK_BE_MMIO;
88 + if (pdata->no_big_frame_no)
89 + ohci->flags |= OHCI_QUIRK_FRAME_NO;
90 +
91 + ohci_hcd_init(ohci);
92 + err = ohci_init(ohci);
93 +
94 + return err;
95 +}
96 +
97 +static int ohci_platform_start(struct usb_hcd *hcd)
98 +{
99 + struct ohci_hcd *ohci = hcd_to_ohci(hcd);
100 + int err;
101 +
102 + err = ohci_run(ohci);
103 + if (err < 0) {
104 + ohci_err(ohci, "can't start\n");
105 + ohci_stop(hcd);
106 + }
107 +
108 + return err;
109 +}
110 +
111 +static const struct hc_driver ohci_platform_hc_driver = {
112 + .description = hcd_name,
113 + .product_desc = "Generic Platform OHCI Controller",
114 + .hcd_priv_size = sizeof(struct ohci_hcd),
115 +
116 + .irq = ohci_irq,
117 + .flags = HCD_MEMORY | HCD_USB11,
118 +
119 + .reset = ohci_platform_reset,
120 + .start = ohci_platform_start,
121 + .stop = ohci_stop,
122 + .shutdown = ohci_shutdown,
123 +
124 + .urb_enqueue = ohci_urb_enqueue,
125 + .urb_dequeue = ohci_urb_dequeue,
126 + .endpoint_disable = ohci_endpoint_disable,
127 +
128 + .get_frame_number = ohci_get_frame,
129 +
130 + .hub_status_data = ohci_hub_status_data,
131 + .hub_control = ohci_hub_control,
132 +#ifdef CONFIG_PM
133 + .bus_suspend = ohci_bus_suspend,
134 + .bus_resume = ohci_bus_resume,
135 +#endif
136 +
137 + .start_port_reset = ohci_start_port_reset,
138 +};
139 +
140 +static int __devinit ohci_platform_probe(struct platform_device *dev)
141 +{
142 + struct usb_hcd *hcd;
143 + struct resource *res_mem;
144 + int irq;
145 + int err = -ENOMEM;
146 +
147 + BUG_ON(!dev->dev.platform_data);
148 +
149 + if (usb_disabled())
150 + return -ENODEV;
151 +
152 + irq = platform_get_irq(dev, 0);
153 + if (irq < 0) {
154 + pr_err("no irq provieded");
155 + return irq;
156 + }
157 +
158 + res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
159 + if (!res_mem) {
160 + pr_err("no memory recourse provieded");
161 + return -ENXIO;
162 + }
163 +
164 + hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
165 + dev_name(&dev->dev));
166 + if (!hcd)
167 + return -ENOMEM;
168 +
169 + hcd->rsrc_start = res_mem->start;
170 + hcd->rsrc_len = resource_size(res_mem);
171 +
172 + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
173 + pr_err("controller already in use");
174 + err = -EBUSY;
175 + goto err_put_hcd;
176 + }
177 +
178 + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
179 + if (!hcd->regs)
180 + goto err_release_region;
181 + err = usb_add_hcd(hcd, irq, IRQF_SHARED);
182 + if (err)
183 + goto err_iounmap;
184 +
185 + platform_set_drvdata(dev, hcd);
186 +
187 + return err;
188 +
189 +err_iounmap:
190 + iounmap(hcd->regs);
191 +err_release_region:
192 + release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
193 +err_put_hcd:
194 + usb_put_hcd(hcd);
195 + return err;
196 +}
197 +
198 +static int __devexit ohci_platform_remove(struct platform_device *dev)
199 +{
200 + struct usb_hcd *hcd = platform_get_drvdata(dev);
201 +
202 + usb_remove_hcd(hcd);
203 + iounmap(hcd->regs);
204 + release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
205 + usb_put_hcd(hcd);
206 + platform_set_drvdata(dev, NULL);
207 +
208 + return 0;
209 +}
210 +
211 +#ifdef CONFIG_PM
212 +
213 +static int ohci_platform_suspend(struct device *dev)
214 +{
215 + return 0;
216 +}
217 +
218 +static int ohci_platform_resume(struct device *dev)
219 +{
220 + struct usb_hcd *hcd = dev_get_drvdata(dev);
221 +
222 + ohci_finish_controller_resume(hcd);
223 + return 0;
224 +}
225 +
226 +#else /* !CONFIG_PM */
227 +#define ohci_platform_suspend NULL
228 +#define ohci_platform_resume NULL
229 +#endif /* CONFIG_PM */
230 +
231 +static const struct platform_device_id ohci_platform_table[] = {
232 + { "ohci-platform", 0 },
233 + { }
234 +};
235 +MODULE_DEVICE_TABLE(platform, ohci_platform_table);
236 +
237 +static const struct dev_pm_ops ohci_platform_pm_ops = {
238 + .suspend = ohci_platform_suspend,
239 + .resume = ohci_platform_resume,
240 +};
241 +
242 +static struct platform_driver ohci_platform_driver = {
243 + .id_table = ohci_platform_table,
244 + .probe = ohci_platform_probe,
245 + .remove = __devexit_p(ohci_platform_remove),
246 + .shutdown = usb_hcd_platform_shutdown,
247 + .driver = {
248 + .owner = THIS_MODULE,
249 + .name = "ohci-platform",
250 + .pm = &ohci_platform_pm_ops,
251 + }
252 +};
253 --- /dev/null
254 +++ b/include/linux/usb/ohci_pdriver.h
255 @@ -0,0 +1,38 @@
256 +/*
257 + * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
258 + *
259 + * This program is free software; you can redistribute it and/or modify it
260 + * under the terms of the GNU General Public License as published by the
261 + * Free Software Foundation; either version 2 of the License, or (at your
262 + * option) any later version.
263 + *
264 + * This program is distributed in the hope that it will be useful, but
265 + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
266 + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
267 + * for more details.
268 + *
269 + * You should have received a copy of the GNU General Public License
270 + * along with this program; if not, write to the Free Software Foundation,
271 + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
272 + */
273 +
274 +#ifndef __USB_CORE_OHCI_PDRIVER_H
275 +#define __USB_CORE_OHCI_PDRIVER_H
276 +
277 +/**
278 + * struct usb_ohci_pdata - platform_data for generic ohci driver
279 + *
280 + * @big_endian_desc: BE descriptors
281 + * @big_endian_mmio: BE registers
282 + * @no_big_frame_no: no big endian frame_no shift
283 + *
284 + * These are general configuration options for the OHCI controller. All of
285 + * these options are activating more or less workarounds for some hardware.
286 + */
287 +struct usb_ohci_pdata {
288 + unsigned big_endian_desc:1;
289 + unsigned big_endian_mmio:1;
290 + unsigned no_big_frame_no:1;
291 +};
292 +
293 +#endif /* __USB_CORE_OHCI_PDRIVER_H */