ar71xx: add preliminary support for Mikrotik RB2011L
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / patches-3.3 / 136-MIPS-ath79-use-correct-fractional-dividers-for-CPU-D.patch
1 From 7328ff547389ee0b455cbf98bdfc819731d9f7b9 Mon Sep 17 00:00:00 2001
2 From: Gabor Juhos <juhosg@openwrt.org>
3 Date: Fri, 31 Aug 2012 14:22:35 +0200
4 Subject: [PATCH] MIPS: ath79: use correct fractional dividers for
5 {CPU,DDR}_PLL on AR934x
6
7 The current dividers in the code are wrong and this
8 leads to broken CPU frequency calculation on boards
9 where the fractional part is used.
10
11 For example, if the SoC is running from a 40MHz
12 reference clock, refdiv=1, nint=14, outdiv=0 and
13 nfrac=31 the real frequency is 579.375MHz but the
14 current code calculates 569.687MHz instead.
15
16 Because the system time is indirectly related to
17 the CPU frequency the broken computation causes
18 drift in the system time.
19
20 The correct divider is 2^6 for the CPU PLL and 2^10
21 for the DDR PLL. Use the correct values to fix the
22 issue.
23
24 Cc: <stable@vger.kernel.org> [3.5+]
25 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
26 ---
27 arch/mips/ath79/clock.c | 4 ++--
28 1 file changed, 2 insertions(+), 2 deletions(-)
29
30 --- a/arch/mips/ath79/clock.c
31 +++ b/arch/mips/ath79/clock.c
32 @@ -189,7 +189,7 @@ static void __init ar934x_clocks_init(vo
33 AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
34
35 cpu_pll = nint * ath79_ref_clk.rate / ref_div;
36 - cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 6));
37 + cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
38 cpu_pll /= (1 << out_div);
39
40 pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
41 @@ -203,7 +203,7 @@ static void __init ar934x_clocks_init(vo
42 AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
43
44 ddr_pll = nint * ath79_ref_clk.rate / ref_div;
45 - ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 10));
46 + ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
47 ddr_pll /= (1 << out_div);
48
49 clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);