target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch

   1 --- a/arch/mips/ath79/mach-db120.c
   2 +++ b/arch/mips/ath79/mach-db120.c
   3 @@ -2,7 +2,7 @@
   4   * Atheros DB120 reference board support
   5   *
   6   * Copyright (c) 2011 Qualcomm Atheros
   7 - * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
   8 + * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
   9   *
  10   * Permission to use, copy, modify, and/or distribute this software for any
  11   * purpose with or without fee is hereby granted, provided that the above
  12 @@ -19,16 +19,26 @@
  13   */
  14
  15  #include <linux/pci.h>
  16 +#include <linux/phy.h>
  17 +#include <linux/platform_device.h>
  18  #include <linux/ath9k_platform.h>
  19 +#include <linux/ar8216_platform.h>
  20
  21 -#include "machtypes.h"
  22 +#include <asm/mach-ath79/ar71xx_regs.h>
  23 +
  24 +#include "common.h"
  25 +#include "dev-ap9x-pci.h"
  26 +#include "dev-eth.h"
  27  #include "dev-gpio-buttons.h"
  28  #include "dev-leds-gpio.h"
  29 +#include "dev-m25p80.h"
  30 +#include "dev-nfc.h"
  31  #include "dev-spi.h"
  32  #include "dev-usb.h"
  33  #include "dev-wmac.h"
  34 -#include "pci.h"
  35 +#include "machtypes.h"
  36
  37 +#define DB120_GPIO_LED_USB             11
  38  #define DB120_GPIO_LED_WLAN_5G         12
  39  #define DB120_GPIO_LED_WLAN_2G         13
  40  #define DB120_GPIO_LED_STATUS          14
  41 @@ -39,8 +49,10 @@
  42  #define DB120_KEYS_POLL_INTERVAL       20      /* msecs */
  43  #define DB120_KEYS_DEBOUNCE_INTERVAL   (3 * DB120_KEYS_POLL_INTERVAL)
  44
  45 -#define DB120_WMAC_CALDATA_OFFSET 0x1000
  46 -#define DB120_PCIE_CALDATA_OFFSET 0x5000
  47 +#define DB120_MAC0_OFFSET              0
  48 +#define DB120_MAC1_OFFSET              6
  49 +#define DB120_WMAC_CALDATA_OFFSET      0x1000
  50 +#define DB120_PCIE_CALDATA_OFFSET      0x5000
  51
  52  static struct gpio_led db120_leds_gpio[] __initdata = {
  53         {
  54 @@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
  55                 .gpio           = DB120_GPIO_LED_WLAN_2G,
  56                 .active_low     = 1,
  57         },
  58 +       {
  59 +               .name           = "db120:green:usb",
  60 +               .gpio           = DB120_GPIO_LED_USB,
  61 +               .active_low     = 1,
  62 +       }
  63  };
  64
  65  static struct gpio_keys_button db120_gpio_keys[] __initdata = {
  66 @@ -76,66 +93,101 @@ static struct gpio_keys_button db120_gpi
  67         },
  68  };
  69
  70 -static struct ath79_spi_controller_data db120_spi0_data = {
  71 -       .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
  72 -       .cs_line = 0,
  73 +static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
  74 +       .mode = AR8327_PAD_MAC_RGMII,
  75 +       .txclk_delay_en = true,
  76 +       .rxclk_delay_en = true,
  77 +       .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
  78 +       .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
  79  };
  80
  81 -static struct spi_board_info db120_spi_info[] = {
  82 -       {
  83 -               .bus_num        = 0,
  84 -               .chip_select    = 0,
  85 -               .max_speed_hz   = 25000000,
  86 -               .modalias       = "s25sl064a",
  87 -               .controller_data = &db120_spi0_data,
  88 -       }
  89 +static struct ar8327_led_cfg db120_ar8327_led_cfg = {
  90 +       .led_ctrl0 = 0x00000000,
  91 +       .led_ctrl1 = 0xc737c737,
  92 +       .led_ctrl2 = 0x00000000,
  93 +       .led_ctrl3 = 0x00c30c00,
  94 +       .open_drain = true,
  95  };
  96
  97 -static struct ath79_spi_platform_data db120_spi_data = {
  98 -       .bus_num        = 0,
  99 -       .num_chipselect = 1,
 100 +static struct ar8327_platform_data db120_ar8327_data = {
 101 +       .pad0_cfg = &db120_ar8327_pad0_cfg,
 102 +       .cpuport_cfg = {
 103 +               .force_link = 1,
 104 +               .speed = AR8327_PORT_SPEED_1000,
 105 +               .duplex = 1,
 106 +               .txpause = 1,
 107 +               .rxpause = 1,
 108 +       },
 109 +       .led_cfg = &db120_ar8327_led_cfg,
 110  };
 111
 112 -#ifdef CONFIG_PCI
 113 -static struct ath9k_platform_data db120_ath9k_data;
 114 +static struct mdio_board_info db120_mdio0_info[] = {
 115 +       {
 116 +               .bus_id = "ag71xx-mdio.0",
 117 +               .phy_addr = 0,
 118 +               .platform_data = &db120_ar8327_data,
 119 +       },
 120 +};
 121
 122 -static int db120_pci_plat_dev_init(struct pci_dev *dev)
 123 +static void __init db120_gmac_setup(void)
 124  {
 125 -       switch (PCI_SLOT(dev->devfn)) {
 126 -       case 0:
 127 -               dev->dev.platform_data = &db120_ath9k_data;
 128 -               break;
 129 -       }
 130 +       void __iomem *base;
 131 +       u32 t;
 132
 133 -       return 0;
 134 -}
 135 +       base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
 136
 137 -static void __init db120_pci_init(u8 *eeprom)
 138 -{
 139 -       memcpy(db120_ath9k_data.eeprom_data, eeprom,
 140 -              sizeof(db120_ath9k_data.eeprom_data));
 141 +       t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
 142 +       t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
 143 +              AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
 144 +       t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE;
 145 +
 146 +       __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
 147
 148 -       ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
 149 -       ath79_register_pci();
 150 +       iounmap(base);
 151  }
 152 -#else
 153 -static inline void db120_pci_init(void) {}
 154 -#endif /* CONFIG_PCI */
 155
 156  static void __init db120_setup(void)
 157  {
 158         u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 159
 160 +       ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
 161 +       ath79_register_m25p80(NULL);
 162 +
 163         ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
 164                                  db120_leds_gpio);
 165         ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
 166                                         ARRAY_SIZE(db120_gpio_keys),
 167                                         db120_gpio_keys);
 168 -       ath79_register_spi(&db120_spi_data, db120_spi_info,
 169 -                          ARRAY_SIZE(db120_spi_info));
 170         ath79_register_usb();
 171         ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
 172 -       db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
 173 +       ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
 174 +
 175 +       db120_gmac_setup();
 176 +
 177 +       ath79_register_mdio(1, 0x0);
 178 +       ath79_register_mdio(0, 0x0);
 179 +
 180 +       ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
 181 +
 182 +       mdiobus_register_board_info(db120_mdio0_info,
 183 +                                   ARRAY_SIZE(db120_mdio0_info));
 184 +
 185 +       /* GMAC0 is connected to an AR8327 switch */
 186 +       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 187 +       ath79_eth0_data.phy_mask = BIT(0);
 188 +       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
 189 +       ath79_eth0_pll_data.pll_1000 = 0x06000000;
 190 +       ath79_register_eth(0);
 191 +
 192 +       /* GMAC1 is connected to the internal switch */
 193 +       ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
 194 +       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
 195 +       ath79_eth1_data.speed = SPEED_1000;
 196 +       ath79_eth1_data.duplex = DUPLEX_FULL;
 197 +
 198 +       ath79_register_eth(1);
 199 +
 200 +       ath79_register_nfc();
 201  }
 202
 203  MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
 204 --- a/arch/mips/ath79/Kconfig
 205 +++ b/arch/mips/ath79/Kconfig
 206 @@ -43,9 +43,12 @@ config ATH79_MACH_AP81
 207  config ATH79_MACH_DB120
 208         bool "Atheros DB120 reference board"
 209         select SOC_AR934X
 210 +       select ATH79_DEV_AP9X_PCI if PCI
 211 +       select ATH79_DEV_ETH
 212         select ATH79_DEV_GPIO_BUTTONS
 213         select ATH79_DEV_LEDS_GPIO
 214 -       select ATH79_DEV_SPI
 215 +       select ATH79_DEV_M25P80
 216 +       select ATH79_DEV_NFC
 217         select ATH79_DEV_USB
 218         select ATH79_DEV_WMAC
 219         help