44e2de25c93cd7305da6c399ae262fdfb87bb06c
[openwrt/svn-archive/archive.git] / target / linux / brcm-2.4 / base-files / etc / init.d / netconfig
1 #!/bin/sh /etc/rc.common
2 # Copyright (C) 2006 OpenWrt.org
3
4 START=05
5
6 start() {
7 [ -e /etc/config/network ] && exit 0
8
9 mkdir -p /etc/config
10
11 (
12 if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
13 # WGT634u
14 echo boardtype=wgt634u
15 else
16 strings "$(find_mtd_part nvram)"
17 fi
18 ) | awk '
19 function p(cfgname, name) {
20 if (c[name] != "") print " option " cfgname " \"" c[name] "\""
21 }
22
23 function macinc(mac, maca, i, result) {
24 split(mac, maca, ":")
25 for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
26 if (++maca[6] > 0xff) {
27 maca[5]++
28 maca[6] = 0
29 }
30 for (i = 1; i <= 6; i++) {
31 if (i != 1) result = result ":"
32 result = result sprintf("%02x", maca[i])
33 }
34 return result
35 }
36
37 BEGIN {
38 FS="="
39 c["lan_ifname"]="eth0.0"
40 c["wan_ifname"]="eth0.1"
41 c["vlan0ports"]="1 2 3 4 5*"
42 c["vlan1ports"]="0 5"
43 getline < "/proc/diag/model"
44 model=$0
45 for (i = 0; i < 6; i++) {
46 if (mac_check != "") mac_check = mac_check ":"
47 mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
48 }
49 }
50
51 ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
52 nvram[$1] = $2
53 }
54
55 END {
56 if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
57 c["wan_ifname"] = ""
58 c["lan_ifname"] = "eth1"
59 }
60 if (model == "ASUS WL-500g") {
61 c["wan_ifname"] = "eth1"
62 c["lan_ifname"] = "eth0"
63 }
64 if (model == "ASUS WL-500g Premium V2") {
65 c["vlan0ports"] = "0 1 2 3 5*"
66 c["vlan1ports"] = "4 5"
67 }
68 if (model == "Dell TrueMobile 2300") {
69 c["lan_ifname"] = "eth0"
70 c["wan_ifname"] = "eth1"
71 c["vlan0ports"] = "0 1 2 3 4 5u"
72 c["vlan1ports"] = ""
73 }
74 if (model == "Dell TrueMobile 2300 v2") {
75 c["vlan0ports"] = "0 1 2 3 5*"
76 c["vlan1ports"] = "4 5"
77 }
78 if (nvram["boardtype"] == "bcm94710r4") {
79 # Toshiba WRC-1000
80 c["lan_ifname"] = "eth0"
81 c["wan_ifname"] = "eth1"
82 }
83 if (nvram["boardtype"] == "wgt634u") {
84 c["vlan0ports"] = "0 1 2 3 5*"
85 c["vlan1ports"] = "4 5"
86 }
87 if (nvram["boardtype"] == "0x0467") {
88 c["vlan0ports"] = "0 1 2 3 5*"
89 c["vlan1ports"] = "4 5"
90 }
91 if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
92 if (nvram["boardnum"] == "45") {
93 # WL-500gP
94 c["vlan0ports"] = "1 2 3 4 5*"
95 c["vlan1ports"] = "0 5"
96 } else {
97 # Generic BCM94704
98 c["vlan0ports"] = "0 1 2 3 4 5u"
99 c["vlan1ports"] = ""
100 c["lan_ifname"] = "eth0"
101 c["wan_ifname"] = "eth1"
102
103 # MAC addresses on 4704 tend to be screwed up. Add a workaround here
104 if (nvram["et0macaddr"] ~ mac_check) {
105 c["lan_macaddr"] = nvram["et0macaddr"]
106 c["wan_macaddr"] = macinc(c["lan_macaddr"])
107 }
108 }
109 }
110 if (nvram["boardtype"] == "0x478") {
111 # generic broadcom 4785 processor with 5397 switch?
112 c["vlan0ports"] = "1 2 3 4 8*"
113 c["vlan1ports"] = "0 8"
114 }
115
116 # WAP54G
117 if ((nvram["boardnum"] == "2") || \
118 (nvram["boardnum"] == "1024")) {
119 c["lan_ifname"]="eth0"
120 c["wan_ifname"]=""
121 }
122
123 # Sitecom WL-105b
124 if ((nvram["boardum"] == "2") && \
125 (nvram["GemtekPmonVer"] == "1")) {
126 c["lan_ifname"]="eth0"
127 c["wan_ifname"]=""
128 }
129
130 # ASUS WL-700gE
131 # These are actually same as defaults above. For some reason this script applies
132 # Generic BCM94704 settings instead so we revert to proper settings here.
133 # Hopefully someone will fix this properly soon.
134 if (model == "ASUS WL-700gE") {
135 c["lan_ifname"]="eth0.0"
136 c["wan_ifname"]="eth0.1"
137 c["vlan0ports"]="1 2 3 4 5*"
138 c["vlan1ports"]="0 5"
139 }
140
141 if (model == "Motorola WR850G V2/V3") {
142 c["vlan0ports"]="0 1 2 3 5*"
143 c["vlan1ports"]="4 5"
144 }
145 if (model == "ASUS WL-500W") {
146 c["lan_ifname"] = "eth0"
147 c["wan_ifname"] = "eth1"
148 c["vlan0ports"] = "0 1 2 3 4 5u"
149 c["vlan1ports"] = ""
150 }
151
152 print "#### VLAN configuration "
153 print "config switch eth0"
154 p("vlan0", "vlan0ports")
155 p("vlan1", "vlan1ports")
156 print ""
157 print ""
158 print "#### Loopback configuration"
159 print "config interface loopback"
160 print " option ifname \"lo\""
161 print " option proto static"
162 print " option ipaddr 127.0.0.1"
163 print " option netmask 255.0.0.0"
164 print ""
165 print ""
166 print "#### LAN configuration"
167 print "config interface lan"
168 print " option type bridge"
169 p("ifname", "lan_ifname")
170 p("macaddr", "lan_macaddr")
171 print " option proto static"
172 print " option ipaddr 192.168.1.1"
173 print " option netmask 255.255.255.0"
174 print ""
175 print ""
176 print "#### WAN configuration"
177 print "config interface wan"
178 p("ifname", "wan_ifname")
179 p("macaddr", "wan_macaddr")
180 print " option proto dhcp"
181 }' > /etc/config/network
182 }