Add support for the WL-500gP v2
[openwrt/svn-archive/archive.git] / target / linux / brcm-2.4 / base-files / etc / init.d / netconfig
1 #!/bin/sh /etc/rc.common
2 # Copyright (C) 2006 OpenWrt.org
3
4 START=05
5
6 start() {
7 [ -e /etc/config/network ] && exit 0
8
9 mkdir -p /etc/config
10
11 (
12 if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
13 # WGT634u
14 echo boardtype=wgt634u
15 else
16 strings "$(find_mtd_part nvram)"
17 fi
18 ) | awk '
19 function p(cfgname, name) {
20 if (c[name] != "") print " option " cfgname " \"" c[name] "\""
21 }
22
23 function macinc(mac, maca, i, result) {
24 split(mac, maca, ":")
25 for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
26 if (++maca[6] > 0xff) {
27 maca[5]++
28 maca[6] = 0
29 }
30 for (i = 1; i <= 6; i++) {
31 if (i != 1) result = result ":"
32 result = result sprintf("%02x", maca[i])
33 }
34 return result
35 }
36
37 BEGIN {
38 FS="="
39 c["lan_ifname"]="eth0.0"
40 c["wan_ifname"]="eth0.1"
41 c["vlan0ports"]="1 2 3 4 5*"
42 c["vlan1ports"]="0 5"
43 getline < "/proc/diag/model"
44 model=$0
45 for (i = 0; i < 6; i++) {
46 if (mac_check != "") mac_check = mac_check ":"
47 mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
48 }
49 }
50
51 ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
52 nvram[$1] = $2
53 }
54
55 END {
56 if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
57 c["wan_ifname"] = ""
58 c["lan_ifname"] = "eth1"
59 }
60 if (model == "ASUS WL-500g") {
61 c["wan_ifname"] = "eth1"
62 c["lan_ifname"] = "eth0"
63 }
64 if (model == "ASUS WL-500g Premium V2") {
65 c["vlan0ports"] = "0 1 2 3 5*"
66 c["vlan1ports"] = "4 5"
67 }
68
69 if (model == "Dell TrueMobile 2300") {
70 c["vlan0ports"] = "0 1 2 3 5*"
71 c["vlan1ports"] = "4 5"
72 }
73 if (nvram["boardtype"] == "bcm94710r4") {
74 # Toshiba WRC-1000
75 c["lan_ifname"] = "eth0"
76 c["wan_ifname"] = "eth1"
77 }
78 if (nvram["boardtype"] == "wgt634u") {
79 c["vlan0ports"] = "0 1 2 3 5*"
80 c["vlan1ports"] = "4 5"
81 }
82 if (nvram["boardtype"] == "0x0467") {
83 c["vlan0ports"] = "0 1 2 3 5*"
84 c["vlan1ports"] = "4 5"
85 }
86 if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
87 if (nvram["boardnum"] == "45") {
88 # WL-500gP
89 c["vlan0ports"] = "1 2 3 4 5*"
90 c["vlan1ports"] = "0 5"
91 } else {
92 # Generic BCM94704
93 c["vlan0ports"] = "0 1 2 3 4 5u"
94 c["vlan1ports"] = ""
95 c["lan_ifname"] = "eth0"
96 c["wan_ifname"] = "eth1"
97
98 # MAC addresses on 4704 tend to be screwed up. Add a workaround here
99 if (nvram["et0macaddr"] ~ mac_check) {
100 c["lan_macaddr"] = nvram["et0macaddr"]
101 c["wan_macaddr"] = macinc(c["lan_macaddr"])
102 }
103 }
104 }
105
106 # WAP54G
107 if ((nvram["boardnum"] == "2") || \
108 (nvram["boardnum"] == "1024")) {
109 c["lan_ifname"]="eth0"
110 c["wan_ifname"]=""
111 }
112
113 # Sitecom WL-105b
114 if ((nvram["boardum"] == "2") && \
115 (nvram["GemtekPmonVer"] == "1")) {
116 c["lan_ifname"]="eth0"
117 c["wan_ifname"]=""
118 }
119
120 # ASUS WL-700gE
121 # These are actually same as defaults above. For some reason this script applies
122 # Generic BCM94704 settings instead so we revert to proper settings here.
123 # Hopefully someone will fix this properly soon.
124 if (model == "ASUS WL-700gE") {
125 c["lan_ifname"]="eth0.0"
126 c["wan_ifname"]="eth0.1"
127 c["vlan0ports"]="1 2 3 4 5*"
128 c["vlan1ports"]="0 5"
129 }
130
131 if (model == "Motorola WR850G V2/V3") {
132 c["vlan0ports"]="0 1 2 3 5*"
133 c["vlan1ports"]="4 5"
134 }
135
136 print "#### VLAN configuration "
137 print "config switch eth0"
138 p("vlan0", "vlan0ports")
139 p("vlan1", "vlan1ports")
140 print ""
141 print ""
142 print "#### Loopback configuration"
143 print "config interface loopback"
144 print " option ifname \"lo\""
145 print " option proto static"
146 print " option ipaddr 127.0.0.1"
147 print " option netmask 255.0.0.0"
148 print ""
149 print ""
150 print "#### LAN configuration"
151 print "config interface lan"
152 print " option type bridge"
153 p("ifname", "lan_ifname")
154 p("macaddr", "lan_macaddr")
155 print " option proto static"
156 print " option ipaddr 192.168.1.1"
157 print " option netmask 255.255.255.0"
158 print ""
159 print ""
160 print "#### WAN configuration"
161 print "config interface wan"
162 p("ifname", "wan_ifname")
163 p("macaddr", "wan_macaddr")
164 print " option proto dhcp"
165 }' > /etc/config/network
166 }