[brcm-2.4] add support for OvisLink WL-1600GL
[openwrt/svn-archive/archive.git] / target / linux / brcm-2.4 / base-files / etc / init.d / netconfig
1 #!/bin/sh /etc/rc.common
2 # Copyright (C) 2006 OpenWrt.org
3
4 START=05
5
6 start() {
7 [ -e /etc/config/network ] && {
8 local batch
9
10 config_cb() {
11 case "$1" in
12 switch)
13 option_cb() {
14 case "$1" in
15 vlan[0-9]|vlan1[0-5])
16 local id="${1#vlan}"
17 append batch "delete network.eth0.${1}${N}"
18 append batch "set network.eth0_${id}=switch_vlan${N}"
19 append batch "set network.eth0_${id}.device=eth0${N}"
20 append batch "set network.eth0_${id}.vlan=${id}${N}"
21 append batch "set network.eth0_${id}.ports='${2}'${N}"
22 ;;
23 esac
24 }
25 ;;
26 switch_vlan)
27 option_cb() { :; }
28 batch=""
29 ;;
30 esac
31 }
32
33 config_load network
34
35 [ -n "$batch" ] && {
36 logger -t netconfig "migrating switch config to new format ..."
37 echo "$batch${N}commit network" | uci batch
38 }
39
40 exit 0
41 }
42
43 mkdir -p /etc/config
44
45 (
46 if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
47 # WGT634u
48 echo boardtype=wgt634u
49 else
50 strings "$(find_mtd_part nvram)"
51 fi
52 ) | awk '
53 function p(cfgname, name) {
54 if (c[name] != "") print " option " cfgname " \"" c[name] "\""
55 }
56
57 function vlan(id, name) {
58 if (c[name] != "") {
59 print "config switch_vlan eth0_" id
60 print " option device \"eth0\""
61 print " option vlan " id
62 print " option ports \"" c[name] "\""
63 print ""
64 }
65 }
66
67 function macinc(mac, maca, i, result) {
68 split(mac, maca, ":")
69 for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
70 if (++maca[6] > 0xff) {
71 maca[5]++
72 maca[6] = 0
73 }
74 for (i = 1; i <= 6; i++) {
75 if (i != 1) result = result ":"
76 result = result sprintf("%02x", maca[i])
77 }
78 return result
79 }
80
81 BEGIN {
82 FS="="
83 c["lan_ifname"]="eth0.0"
84 c["wan_ifname"]="eth0.1"
85 c["vlan0ports"]="1 2 3 4 5*"
86 c["vlan1ports"]="0 5"
87 getline < "/proc/diag/model"
88 model=$0
89 for (i = 0; i < 6; i++) {
90 if (mac_check != "") mac_check = mac_check ":"
91 mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
92 }
93 }
94
95 ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
96 nvram[$1] = $2
97 }
98
99 END {
100 if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
101 c["wan_ifname"] = ""
102 c["lan_ifname"] = "eth1"
103 }
104 if (model == "ASUS WL-330gE") {
105 c["wan_ifname"] = ""
106 c["lan_ifname"] = "eth0"
107 c["vlan0ports"] = ""
108 c["vlan1ports"] = ""
109 }
110 if (model == "ASUS WL-500g") {
111 c["wan_ifname"] = "eth1"
112 c["lan_ifname"] = "eth0"
113 }
114 if (model == "ASUS WL-500g Premium V2") {
115 c["vlan0ports"] = "0 1 2 3 5*"
116 c["vlan1ports"] = "4 5"
117 }
118 if (model == "Dell TrueMobile 2300") {
119 c["lan_ifname"] = "eth0"
120 c["wan_ifname"] = "eth1"
121 c["vlan0ports"] = "0 1 2 3 4 5u"
122 c["vlan1ports"] = ""
123 }
124 if (model == "Dell TrueMobile 2300 v2") {
125 c["vlan0ports"] = "0 1 2 3 5*"
126 c["vlan1ports"] = "4 5"
127 }
128 if (nvram["boardtype"] == "bcm94710r4") {
129 # Toshiba WRC-1000
130 c["lan_ifname"] = "eth0"
131 c["wan_ifname"] = "eth1"
132 }
133 if (nvram["boardtype"] == "wgt634u") {
134 c["vlan0ports"] = "0 1 2 3 5*"
135 c["vlan1ports"] = "4 5"
136 }
137 if (nvram["boardtype"] == "0x0467") {
138 c["vlan0ports"] = "0 1 2 3 5*"
139 c["vlan1ports"] = "4 5"
140 }
141 if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
142 if (nvram["boardnum"] == "45") {
143 # WL-500gP
144 c["vlan0ports"] = "1 2 3 4 5*"
145 c["vlan1ports"] = "0 5"
146 } else {
147 # Generic BCM94704
148 c["vlan0ports"] = "0 1 2 3 4 5u"
149 c["vlan1ports"] = ""
150 c["lan_ifname"] = "eth0"
151 c["wan_ifname"] = "eth1"
152
153 # MAC addresses on 4704 tend to be screwed up. Add a workaround here
154 if (nvram["et0macaddr"] ~ mac_check) {
155 c["lan_macaddr"] = nvram["et0macaddr"]
156 c["wan_macaddr"] = macinc(c["lan_macaddr"])
157 }
158 }
159 }
160 # Buffalo WBR-B11 and Buffalo WBR-G54
161 if (nvram["boardtype"] == "bcm94710ap") {
162 c["vlan0ports"] = "0 1 2 3 4 5u"
163 c["vlan1ports"] = ""
164 c["lan_ifname"] = "eth0"
165 c["wan_ifname"] = "eth1"
166 }
167 # generic broadcom 4705/4785 processor with 5397 switch?
168 # EXCEPT Linksys WRT300N V1.1
169 if ((nvram["boardtype"] == "0x478") && \
170 (model != "Linksys WRT300N V1.1")) {
171 c["vlan0ports"] = "1 2 3 4 8*"
172 c["vlan1ports"] = "0 8"
173 }
174
175 # WAP54G
176 if ((nvram["boardnum"] == "2") || \
177 (nvram["boardnum"] == "1024")) {
178 c["lan_ifname"]="eth0"
179 c["wan_ifname"]=""
180 }
181
182 # Sitecom WL-105b
183 if ((nvram["boardum"] == "2") && \
184 (nvram["GemtekPmonVer"] == "1")) {
185 c["lan_ifname"]="eth0"
186 c["wan_ifname"]=""
187 }
188
189 # ASUS WL-700gE
190 # These are actually same as defaults above. For some reason this script applies
191 # Generic BCM94704 settings instead so we revert to proper settings here.
192 # Hopefully someone will fix this properly soon.
193 if (model == "ASUS WL-700gE") {
194 c["lan_ifname"]="eth0.0"
195 c["wan_ifname"]="eth0.1"
196 c["vlan0ports"]="1 2 3 4 5*"
197 c["vlan1ports"]="0 5"
198 }
199
200 if (model == "Motorola WR850G V2/V3") {
201 c["vlan0ports"]="0 1 2 3 5*"
202 c["vlan1ports"]="4 5"
203 }
204 if (model == "ASUS WL-500W") {
205 c["lan_ifname"] = "eth0"
206 c["wan_ifname"] = "eth1"
207 c["vlan0ports"] = "0 1 2 3 4 5u"
208 c["vlan1ports"] = ""
209 }
210 if (model == "OvisLink WL-1600GL") {
211 c["lan_ifname"] = "eth0.0"
212 c["wan_ifname"] = "eth0.1"
213 c["vlan0ports"] = "0 1 2 3 5*"
214 c["vlan1ports"] = "4 5"
215 }
216
217 if (c["vlan0ports"] || c["vlan1ports"]) {
218 print "#### VLAN configuration "
219 print "config switch eth0"
220 print " option enable 1"
221 print ""
222 vlan(0, "vlan0ports")
223 vlan(1, "vlan1ports")
224 }
225 print "#### Loopback configuration"
226 print "config interface loopback"
227 print " option ifname \"lo\""
228 print " option proto static"
229 print " option ipaddr 127.0.0.1"
230 print " option netmask 255.0.0.0"
231 print ""
232 print ""
233 print "#### LAN configuration"
234 print "config interface lan"
235 print " option type bridge"
236 p("ifname", "lan_ifname")
237 p("macaddr", "lan_macaddr")
238 print " option proto static"
239 print " option ipaddr 192.168.1.1"
240 print " option netmask 255.255.255.0"
241 print ""
242 print ""
243 if (c["wan_ifname"]) {
244 print "#### WAN configuration"
245 print "config interface wan"
246 p("ifname", "wan_ifname")
247 p("macaddr", "wan_macaddr")
248 print " option proto dhcp"
249 } else {
250 print "#### WAN configuration (disabled)"
251 print "#config interface wan"
252 print "# option proto dhcp"
253 }
254 }' > /etc/config/network
255 }