target/linux/brcm47xx/patches-2.6.25/230-ohci-ssb.patch

   1 From: Michael Buesch <mb@bu3sch.de>
   2 Date: Wed, 10 Oct 2007 06:47:17 +0000 (-0700)
   3 Subject: USB: ohci SSB bus glue
   4 X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fralf%2Flinux.git;a=commitdiff_plain;h=c604e851486eabcbeb73e984279d436ce121fd5d
   5
   6 USB: ohci SSB bus glue
   7
   8 This adds SSB bus glue for the USB OHCI HCD.
   9
  10 Signed-off-by: Michael Buesch <mb@bu3sch.de>
  11 Signed-off-by: John W. Linville <linville@tuxdriver.com>
  12 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
  13 Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
  14 ---
  15
  16 Index: linux-2.6.23.16/drivers/usb/host/Kconfig
  17 ===================================================================
  18 --- linux-2.6.23.16.orig/drivers/usb/host/Kconfig       2008-02-19 00:47:29.000000000 +0100
  19 +++ linux-2.6.23.16/drivers/usb/host/Kconfig    2008-02-19 00:47:51.000000000 +0100
  20 @@ -154,6 +154,19 @@ config USB_OHCI_HCD_PCI
  21           Enables support for PCI-bus plug-in USB controller cards.
  22           If unsure, say Y.
  23
  24 +config USB_OHCI_HCD_SSB
  25 +       bool "OHCI support for Broadcom SSB OHCI core"
  26 +       depends on USB_OHCI_HCD && SSB && EXPERIMENTAL
  27 +       default n
  28 +       ---help---
  29 +         Support for the Sonics Silicon Backplane (SSB) attached
  30 +         Broadcom USB OHCI core.
  31 +
  32 +         This device is present in some embedded devices with
  33 +         Broadcom based SSB bus.
  34 +
  35 +         If unsure, say N.
  36 +
  37  config USB_OHCI_BIG_ENDIAN_DESC
  38         bool
  39         depends on USB_OHCI_HCD
  40 Index: linux-2.6.23.16/drivers/usb/host/ohci-hcd.c
  41 ===================================================================
  42 --- linux-2.6.23.16.orig/drivers/usb/host/ohci-hcd.c    2008-02-19 00:47:29.000000000 +0100
  43 +++ linux-2.6.23.16/drivers/usb/host/ohci-hcd.c 2008-02-19 00:47:51.000000000 +0100
  44 @@ -926,11 +926,17 @@ MODULE_LICENSE ("GPL");
  45  #define PS3_SYSTEM_BUS_DRIVER  ps3_ohci_driver
  46  #endif
  47
  48 +#ifdef CONFIG_USB_OHCI_HCD_SSB
  49 +#include "ohci-ssb.c"
  50 +#define SSB_OHCI_DRIVER                ssb_ohci_driver
  51 +#endif
  52 +
  53  #if    !defined(PCI_DRIVER) &&         \
  54         !defined(PLATFORM_DRIVER) &&    \
  55         !defined(OF_PLATFORM_DRIVER) && \
  56         !defined(SA1111_DRIVER) &&      \
  57 -       !defined(PS3_SYSTEM_BUS_DRIVER)
  58 +       !defined(PS3_SYSTEM_BUS_DRIVER) && \
  59 +       !defined(SSB_OHCI_DRIVER)
  60  #error "missing bus glue for ohci-hcd"
  61  #endif
  62
  63 @@ -975,10 +981,20 @@ static int __init ohci_hcd_mod_init(void
  64                 goto error_pci;
  65  #endif
  66
  67 +#ifdef SSB_OHCI_DRIVER
  68 +       retval = ssb_driver_register(&SSB_OHCI_DRIVER);
  69 +       if (retval)
  70 +               goto error_ssb;
  71 +#endif
  72 +
  73         return retval;
  74
  75         /* Error path */
  76 +#ifdef SSB_OHCI_DRIVER
  77 + error_ssb:
  78 +#endif
  79  #ifdef PCI_DRIVER
  80 +       pci_unregister_driver(&PCI_DRIVER);
  81   error_pci:
  82  #endif
  83  #ifdef SA1111_DRIVER
  84 @@ -1003,6 +1019,9 @@ module_init(ohci_hcd_mod_init);
  85
  86  static void __exit ohci_hcd_mod_exit(void)
  87  {
  88 +#ifdef SSB_OHCI_DRIVER
  89 +       ssb_driver_unregister(&SSB_OHCI_DRIVER);
  90 +#endif
  91  #ifdef PCI_DRIVER
  92         pci_unregister_driver(&PCI_DRIVER);
  93  #endif
  94 Index: linux-2.6.23.16/drivers/usb/host/ohci-ssb.c
  95 ===================================================================
  96 --- /dev/null   1970-01-01 00:00:00.000000000 +0000
  97 +++ linux-2.6.23.16/drivers/usb/host/ohci-ssb.c 2008-02-19 00:47:51.000000000 +0100
  98 @@ -0,0 +1,247 @@
  99 +/*
 100 + * Sonics Silicon Backplane
 101 + * Broadcom USB-core OHCI driver
 102 + *
 103 + * Copyright 2007 Michael Buesch <mb@bu3sch.de>
 104 + *
 105 + * Derived from the OHCI-PCI driver
 106 + * Copyright 1999 Roman Weissgaerber
 107 + * Copyright 2000-2002 David Brownell
 108 + * Copyright 1999 Linus Torvalds
 109 + * Copyright 1999 Gregory P. Smith
 110 + *
 111 + * Derived from the USBcore related parts of Broadcom-SB
 112 + * Copyright 2005 Broadcom Corporation
 113 + *
 114 + * Licensed under the GNU/GPL. See COPYING for details.
 115 + */
 116 +#include <linux/ssb/ssb.h>
 117 +
 118 +
 119 +#define SSB_OHCI_TMSLOW_HOSTMODE       (1 << 29)
 120 +
 121 +struct ssb_ohci_device {
 122 +       struct ohci_hcd ohci; /* _must_ be at the beginning. */
 123 +
 124 +       u32 enable_flags;
 125 +};
 126 +
 127 +static inline
 128 +struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
 129 +{
 130 +       return (struct ssb_ohci_device *)(hcd->hcd_priv);
 131 +}
 132 +
 133 +
 134 +static int ssb_ohci_reset(struct usb_hcd *hcd)
 135 +{
 136 +       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
 137 +       struct ohci_hcd *ohci = &ohcidev->ohci;
 138 +       int err;
 139 +
 140 +       ohci_hcd_init(ohci);
 141 +       err = ohci_init(ohci);
 142 +
 143 +       return err;
 144 +}
 145 +
 146 +static int ssb_ohci_start(struct usb_hcd *hcd)
 147 +{
 148 +       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
 149 +       struct ohci_hcd *ohci = &ohcidev->ohci;
 150 +       int err;
 151 +
 152 +       err = ohci_run(ohci);
 153 +       if (err < 0) {
 154 +               ohci_err(ohci, "can't start\n");
 155 +               ohci_stop(hcd);
 156 +       }
 157 +
 158 +       return err;
 159 +}
 160 +
 161 +#ifdef CONFIG_PM
 162 +static int ssb_ohci_hcd_suspend(struct usb_hcd *hcd, pm_message_t message)
 163 +{
 164 +       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
 165 +       struct ohci_hcd *ohci = &ohcidev->ohci;
 166 +       unsigned long flags;
 167 +
 168 +       spin_lock_irqsave(&ohci->lock, flags);
 169 +
 170 +       ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 171 +       ohci_readl(ohci, &ohci->regs->intrdisable); /* commit write */
 172 +
 173 +       /* make sure snapshot being resumed re-enumerates everything */
 174 +       if (message.event == PM_EVENT_PRETHAW)
 175 +               ohci_usb_reset(ohci);
 176 +
 177 +       clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 178 +
 179 +       spin_unlock_irqrestore(&ohci->lock, flags);
 180 +       return 0;
 181 +}
 182 +
 183 +static int ssb_ohci_hcd_resume(struct usb_hcd *hcd)
 184 +{
 185 +       set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 186 +       usb_hcd_resume_root_hub(hcd);
 187 +       return 0;
 188 +}
 189 +#endif /* CONFIG_PM */
 190 +
 191 +static const struct hc_driver ssb_ohci_hc_driver = {
 192 +       .description            = "ssb-usb-ohci",
 193 +       .product_desc           = "SSB OHCI Controller",
 194 +       .hcd_priv_size          = sizeof(struct ssb_ohci_device),
 195 +
 196 +       .irq                    = ohci_irq,
 197 +       .flags                  = HCD_MEMORY | HCD_USB11,
 198 +
 199 +       .reset                  = ssb_ohci_reset,
 200 +       .start                  = ssb_ohci_start,
 201 +       .stop                   = ohci_stop,
 202 +       .shutdown               = ohci_shutdown,
 203 +
 204 +#ifdef CONFIG_PM
 205 +       .suspend                = ssb_ohci_hcd_suspend,
 206 +       .resume                 = ssb_ohci_hcd_resume,
 207 +#endif
 208 +
 209 +       .urb_enqueue            = ohci_urb_enqueue,
 210 +       .urb_dequeue            = ohci_urb_dequeue,
 211 +       .endpoint_disable       = ohci_endpoint_disable,
 212 +
 213 +       .get_frame_number       = ohci_get_frame,
 214 +
 215 +       .hub_status_data        = ohci_hub_status_data,
 216 +       .hub_control            = ohci_hub_control,
 217 +       .hub_irq_enable         = ohci_rhsc_enable,
 218 +       .bus_suspend            = ohci_bus_suspend,
 219 +       .bus_resume             = ohci_bus_resume,
 220 +
 221 +       .start_port_reset       = ohci_start_port_reset,
 222 +};
 223 +
 224 +static void ssb_ohci_detach(struct ssb_device *dev)
 225 +{
 226 +       struct usb_hcd *hcd = ssb_get_drvdata(dev);
 227 +
 228 +       usb_remove_hcd(hcd);
 229 +       iounmap(hcd->regs);
 230 +       usb_put_hcd(hcd);
 231 +       ssb_device_disable(dev, 0);
 232 +}
 233 +
 234 +static int ssb_ohci_attach(struct ssb_device *dev)
 235 +{
 236 +       struct ssb_ohci_device *ohcidev;
 237 +       struct usb_hcd *hcd;
 238 +       int err = -ENOMEM;
 239 +       u32 tmp, flags = 0;
 240 +
 241 +       if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
 242 +               flags |= SSB_OHCI_TMSLOW_HOSTMODE;
 243 +
 244 +       ssb_device_enable(dev, flags);
 245 +
 246 +       hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
 247 +                       dev->dev->bus_id);
 248 +       if (!hcd)
 249 +               goto err_dev_disable;
 250 +       ohcidev = hcd_to_ssb_ohci(hcd);
 251 +       ohcidev->enable_flags = flags;
 252 +
 253 +       tmp = ssb_read32(dev, SSB_ADMATCH0);
 254 +       hcd->rsrc_start = ssb_admatch_base(tmp);
 255 +       hcd->rsrc_len = ssb_admatch_size(tmp);
 256 +       hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 257 +       if (!hcd->regs)
 258 +               goto err_put_hcd;
 259 +       err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
 260 +       if (err)
 261 +               goto err_iounmap;
 262 +
 263 +       ssb_set_drvdata(dev, hcd);
 264 +
 265 +       return err;
 266 +
 267 +err_iounmap:
 268 +       iounmap(hcd->regs);
 269 +err_put_hcd:
 270 +       usb_put_hcd(hcd);
 271 +err_dev_disable:
 272 +       ssb_device_disable(dev, flags);
 273 +       return err;
 274 +}
 275 +
 276 +static int ssb_ohci_probe(struct ssb_device *dev,
 277 +               const struct ssb_device_id *id)
 278 +{
 279 +       int err;
 280 +       u16 chipid_top;
 281 +
 282 +       /* USBcores are only connected on embedded devices. */
 283 +       chipid_top = (dev->bus->chip_id & 0xFF00);
 284 +       if (chipid_top != 0x4700 && chipid_top != 0x5300)
 285 +               return -ENODEV;
 286 +
 287 +       /* TODO: Probably need checks here; is the core connected? */
 288 +
 289 +       if (usb_disabled())
 290 +               return -ENODEV;
 291 +
 292 +       /* We currently always attach SSB_DEV_USB11_HOSTDEV
 293 +        * as HOST OHCI. If we want to attach it as Client device,
 294 +        * we must branch here and call into the (yet to
 295 +        * be written) Client mode driver. Same for remove(). */
 296 +
 297 +       err = ssb_ohci_attach(dev);
 298 +
 299 +       return err;
 300 +}
 301 +
 302 +static void ssb_ohci_remove(struct ssb_device *dev)
 303 +{
 304 +       ssb_ohci_detach(dev);
 305 +}
 306 +
 307 +#ifdef CONFIG_PM
 308 +
 309 +static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
 310 +{
 311 +       ssb_device_disable(dev, 0);
 312 +
 313 +       return 0;
 314 +}
 315 +
 316 +static int ssb_ohci_resume(struct ssb_device *dev)
 317 +{
 318 +       struct usb_hcd *hcd = ssb_get_drvdata(dev);
 319 +       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
 320 +
 321 +       ssb_device_enable(dev, ohcidev->enable_flags);
 322 +
 323 +       return 0;
 324 +}
 325 +
 326 +#else /* !CONFIG_PM */
 327 +#define ssb_ohci_suspend       NULL
 328 +#define ssb_ohci_resume        NULL
 329 +#endif /* CONFIG_PM */
 330 +
 331 +static const struct ssb_device_id ssb_ohci_table[] = {
 332 +       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
 333 +       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
 334 +       SSB_DEVTABLE_END
 335 +};
 336 +MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
 337 +
 338 +static struct ssb_driver ssb_ohci_driver = {
 339 +       .name           = KBUILD_MODNAME,
 340 +       .id_table       = ssb_ohci_table,
 341 +       .probe          = ssb_ohci_probe,
 342 +       .remove         = ssb_ohci_remove,
 343 +       .suspend        = ssb_ohci_suspend,
 344 +       .resume         = ssb_ohci_resume,
 345 +};