target/linux/brcm63xx/dts/vr-3026e.dts

   1 /dts-v1/;
   2
   3 #include "bcm6368.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Comtrend VR-3026e";
   9         compatible = "comtrend,vr-3026e", "brcm,bcm6368";
  10
  11         gpio-keys-polled {
  12                 compatible = "gpio-keys-polled";
  13                 #address-cells = <1>;
  14                 #size-cells = <0>;
  15                 poll-interval = <20>;
  16                 debounce-interval = <60>;
  17
  18                 reset {
  19                         label = "reset";
  20                         gpios = <&gpio1 2 1>;
  21                         linux,code = <KEY_RESTART>;
  22                 };
  23         };
  24
  25         gpio-leds {
  26                 compatible = "gpio-leds";
  27
  28                 dsl_green {
  29                         label = "VR-3026e:green:dsl";
  30                         gpios = <&gpio0 2 1>;
  31                 };
  32                 inet_green {
  33                         label = "VR-3026e:green:inet";
  34                         gpios = <&gpio0 5 0>;
  35                 };
  36                 lan1_green {
  37                         label = "VR-3026e:green:lan1";
  38                         gpios = <&gpio0 6 1>;
  39                 };
  40                 lan2_green {
  41                         label = "VR-3026e:green:lan2";
  42                         gpios = <&gpio0 7 1>;
  43                 };
  44                 lan3_green {
  45                         label = "VR-3026e:green:lan3";
  46                         gpios = <&gpio0 8 1>;
  47                 };
  48                 lan4_green {
  49                         label = "VR-3026e:green:lan4";
  50                         gpios = <&gpio0 9 1>;
  51                 };
  52                 power_green {
  53                         label = "VR-3026e:green:power";
  54                         gpios = <&gpio0 22 0>;
  55                         default-state = "on";
  56                 };
  57                 power_red {
  58                         label = "VR-3026e:red:power";
  59                         gpios = <&gpio0 24 0>;
  60                 };
  61                 inet_red {
  62                         label = "VR-3026e:red:inet";
  63                         gpios = <&gpio0 31 0>;
  64                 };
  65         };
  66 };
  67
  68 &pflash {
  69         status = "ok";
  70
  71         linux,part-probe = "bcm63xxpart";
  72
  73         cfe@0 {
  74                 label = "CFE";
  75                 reg = <0x000000 0x010000>;
  76                 read-only;
  77         };
  78
  79         linux@10000 {
  80                 label = "linux";
  81                 reg = <0x010000 0x7e0000>;
  82         };
  83
  84         nvram@7f0000 {
  85                 label = "nvram";
  86                 reg = <0x7f0000 0x010000>;
  87         };
  88 };