[brcm63xx] image Makefile: Corrected router imagename length limiting. Thanks KanjiM...
[openwrt/svn-archive/archive.git] / target / linux / brcm63xx / image / Makefile
1 #
2 # Copyright (C) 2006-2010 OpenWrt.org
3 #
4 # This is free software, licensed under the GNU General Public License v2.
5 # See /LICENSE for more information.
6 #
7 include $(TOPDIR)/rules.mk
8 include $(INCLUDE_DIR)/image.mk
9
10 LOADADDR = 0x80010000 # RAM start + 16M
11 KERNEL_ENTRY = $(LOADADDR) # Newer kernels add a jmp to the kernel_entry at the start of the binary
12 RAMSIZE = 0x01000000 # 64MB
13
14 LOADER_MAKEOPTS= \
15 KDIR=$(KDIR) \
16 LOADADDR=$(LOADADDR) \
17 KERNEL_ENTRY=$(KERNEL_ENTRY) \
18 RAMSIZE=$(RAMSIZE)
19
20 define trxalign/jffs2-128k
21 -a 0x20000
22 endef
23 define trxalign/jffs2-64k
24 -a 0x10000
25 endef
26 define trxalign/squashfs
27 -a 1024
28 endef
29
30 define Image/LimitName16
31 $(shell expr substr "$(1)" 1 16)
32 endef
33
34 define Image/Build/CFE
35 # Generate the tagged image
36 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
37 --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
38 --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
39 --load-addr $(LOADADDR) --rsa-signature "$(5)" \
40 --info1 "-$(call Image/LimitName16,$(4))" --info2 $(1) \
41 $(6) $(7) $(8) $(9)
42 endef
43
44 define Image/Build/CFEFIXUP
45 # Generate the tagged image
46 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
47 --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
48 --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
49 --load-addr $(LOADADDR) --rsa-signature "$(5)" \
50 --info1 "+$(call Image/LimitName16,$(4))" --info2 $(1) \
51 $(6) $(7) $(8) $(9)
52 endef
53
54 define Image/Build/CFEAGPF
55 # Generate the tagged image
56 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
57 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
58 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
59 --load-addr $(LOADADDR) --tag-version 8 \
60 --signature2 IMAGE --block-size 0x20000 \
61 --image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
62 endef
63
64 define Image/Build/RG100A
65 # Generate the tagged image
66 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
67 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
68 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
69 --load-addr $(LOADADDR) --block-size 0x20000 \
70 --image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
71 endef
72
73 define Image/Build/RedBoot
74 cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
75 gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
76 $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
77 dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
78 dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
79 endef
80
81 define Image/Build/CFEOLD
82 $(TOPDIR)/scripts/brcmImage.pl -t -p \
83 -b $(2) -c $(3) \
84 -k $(KDIR)/vmlinux.lzma.cfe \
85 -r $(KDIR)/root.$(1) \
86 -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
87 endef
88
89 define Build/Clean
90 $(MAKE) -C lzma-loader clean
91 endef
92
93 define Image/Prepare
94 # Standard LZMA kernel
95 cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
96
97 # CFE is a LZMA nazi! It took me hours to find out the parameters!
98 # Also I think lzma has a bug cause it generates different output depending on
99 # if you use stdin / stdout or not. Use files instead of stdio here, cause
100 # otherwise CFE will complain and not boot the image.
101 $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
102
103 # Strip out the length, CFE doesn't like this
104 dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
105 dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
106 rm -f $(KDIR)/vmlinux.lzma.tmp
107
108 # Build the LZMA loader
109 rm -f $(KDIR)/loader.gz
110 $(MAKE) -C lzma-loader \
111 BUILD_DIR="$(KDIR)" \
112 TARGET="$(KDIR)" \
113 clean install
114
115 echo -ne "\\x00" >> $(KDIR)/loader.gz
116 rm -f $(KDIR)/fs_mark
117 touch $(KDIR)/fs_mark
118 $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
119 endef
120
121 define Image/Build
122 dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
123 # Various routers
124 $(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
125 $(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,--layoutver 5)
126 $(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-rev,OpenWRT-$(REVISION))
127 $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-generic,,)
128 $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-bc221,,--layoutver 5)
129 $(call Image/Build/CFE,$(1),6338GW,6338,6338GW-generic,,)
130 $(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,)
131
132 # BT Voyager V210_BTR
133 $(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
134 # BT Voyager V210_ROI, V210_WB
135 $(call Image/Build/CFE,$(1),V210,6348,BTV210_ROI_WB,,--layoutver 5)
136 # BT Voyager V2091_BTR
137 $(call Image/Build/CFE,$(1),V2091_BB,6348,BTV2091_BTR,,--layoutver 5)
138 # BT Voyager V2091_ROI, V2091_WB
139 $(call Image/Build/CFE,$(1),V2091,6348,BTV2091_ROI_WB,,--layoutver 5)
140 # BT Voyager V220V, V220V_MGCP_BTR
141 $(call Image/Build/CFE,$(1),RTA1052V,6348,BTV220V_MGCP_BTR,,--layoutver 5)
142 # BT Voyager V2110, V2110_AA, V2110_ROI
143 $(call Image/Build/CFE,$(1),V2110,6348,BTV2110,,--layoutver 5)
144 # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
145 $(call Image/Build/CFE,$(1),V2500V_BB,6348,BTV2500V,,--layoutver 5)
146 # RTA1025W_16 (numerous routers)
147 $(call Image/Build/CFE,$(1),RTA1025W_16,6348,RTA1025W_16,,--layoutver 5)
148 # Tecom GW6000
149 $(call Image/Build/CFE,$(1),96348GW,6348,GW6000)
150 # Tecom GW6200
151 $(call Image/Build/CFE,$(1),96348GW,6348,GW6200,$(shell printf '\x99'))
152 # Neufbox4
153 $(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
154 # Comtrend 536, 5621
155 $(call Image/Build/CFE,$(1),96348GW-11,6348,CT536_CT5621)
156 # Davolink DV201AMR
157 $(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
158 # USR 9108
159 $(call Image/Build/CFE,$(1),96348GW-A,6348,USR9108)
160 # NetGear DG834GT, DG834PN
161 $(call Image/Build/CFE,$(1),96348GW-10,6348,DG834GT_DG834PN)
162 # Belkin f5d7633
163 $(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633)
164 # D-Link DSL-2640B
165 $(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B)
166 # D-Link DSL-2740B/DSL-2741B, rev C2
167 $(call Image/Build/CFE,$(1),96358GW,6358,DSL274XB-C2)
168
169 # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
170 $(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
171 # TP-Link 8900GB
172 $(call Image/Build/CFE,$(1),96348GW-11,6348,TD8900GB,$(shell printf 'PRID\x89\x10\x00\x02'))
173
174 # Sagem F@ST2404
175 $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe)
176 $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION))
177 # Inventel Livebox
178 $(call Image/Build/RedBoot,livebox)
179 # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
180 $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W-cfe)
181 $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W)
182 # Pirelli A226G
183 $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G-cfe)
184 $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G)
185
186 # RG100A,DB120 etc.
187 $(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120)
188
189 # Telsey CPVA642-type (e.g. CPA-ZNTE60T)
190 $(call Image/Build/CFE,$(1),CPVA642,6358,CPA-ZNTE60T,,--signature "Telsey Tlc",--signature2 "99.99.999",--second-image-flag "0")
191
192 # T-Com Speedport W 500V
193 $(call Image/Build/CFEFIXUP,$(1),96348GW,6348,SPW500V)
194 endef
195
196 $(eval $(call BuildImage))