[brcm63xx] add support for HW553 bcm6358-based boards (#8844)
[openwrt/svn-archive/archive.git] / target / linux / brcm63xx / image / Makefile
1 #
2 # Copyright (C) 2006-2010 OpenWrt.org
3 #
4 # This is free software, licensed under the GNU General Public License v2.
5 # See /LICENSE for more information.
6 #
7 include $(TOPDIR)/rules.mk
8 include $(INCLUDE_DIR)/image.mk
9
10 LOADADDR = 0x80010000 # RAM start + 16M
11 KERNEL_ENTRY = $(LOADADDR) # Newer kernels add a jmp to the kernel_entry at the start of the binary
12 RAMSIZE = 0x01000000 # 64MB
13
14 LOADER_MAKEOPTS= \
15 KDIR=$(KDIR) \
16 LOADADDR=$(LOADADDR) \
17 KERNEL_ENTRY=$(KERNEL_ENTRY) \
18 RAMSIZE=$(RAMSIZE)
19
20 define trxalign/jffs2-128k
21 -a 0x20000
22 endef
23 define trxalign/jffs2-64k
24 -a 0x10000
25 endef
26 define trxalign/squashfs
27 -a 1024
28 endef
29
30 define Image/LimitName16
31 $(shell expr substr "$(1)" 1 16)
32 endef
33
34 define Image/Build/CFE
35 # Generate the tagged image
36 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
37 --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
38 --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
39 --load-addr $(LOADADDR) --rsa-signature "$(5)" \
40 --info1 "-$(call Image/LimitName16,$(4))" --info2 $(1) \
41 $(6) $(7) $(8) $(9)
42 endef
43
44 define Image/Build/CFEFIXUP
45 # Generate the tagged image
46 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
47 --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
48 --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
49 --load-addr $(LOADADDR) --rsa-signature "$(5)" \
50 --info1 "+$(call Image/LimitName16,$(4))" --info2 $(1) \
51 $(6) $(7) $(8) $(9)
52 endef
53
54 define Image/Build/CFEHW553
55 # Generate the tagged image
56 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
57 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
58 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
59 --load-addr $(LOADADDR) --tag-version 7 \
60 --block-size 0x20000 --image-offset $(4)
61 endef
62
63 define Image/Build/CFEAGPF
64 # Generate the tagged image
65 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
66 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
67 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
68 --load-addr $(LOADADDR) --tag-version 8 \
69 --signature2 IMAGE --block-size 0x20000 \
70 --image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
71 endef
72
73 define Image/Build/RG100A
74 # Generate the tagged image
75 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
76 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
77 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
78 --load-addr $(LOADADDR) --block-size 0x20000 \
79 --image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
80 endef
81
82 define Image/Build/RedBoot
83 cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
84 gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
85 $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
86 dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
87 dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
88 endef
89
90 define Image/Build/CFEOLD
91 $(TOPDIR)/scripts/brcmImage.pl -t -p \
92 -b $(2) -c $(3) \
93 -k $(KDIR)/vmlinux.lzma.cfe \
94 -r $(KDIR)/root.$(1) \
95 -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
96 endef
97
98 define Build/Clean
99 $(MAKE) -C lzma-loader clean
100 endef
101
102 define Image/Prepare
103 # Standard LZMA kernel
104 cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
105
106 # CFE is a LZMA nazi! It took me hours to find out the parameters!
107 # Also I think lzma has a bug cause it generates different output depending on
108 # if you use stdin / stdout or not. Use files instead of stdio here, cause
109 # otherwise CFE will complain and not boot the image.
110 $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
111
112 # Strip out the length, CFE doesn't like this
113 dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
114 dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
115 rm -f $(KDIR)/vmlinux.lzma.tmp
116
117 # Build the LZMA loader
118 rm -f $(KDIR)/loader.gz
119 $(MAKE) -C lzma-loader \
120 BUILD_DIR="$(KDIR)" \
121 TARGET="$(KDIR)" \
122 clean install
123
124 echo -ne "\\x00" >> $(KDIR)/loader.gz
125 rm -f $(KDIR)/fs_mark
126 touch $(KDIR)/fs_mark
127 $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
128 endef
129
130 define Image/Build
131 dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
132 # Various routers
133 $(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
134 $(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,--layoutver 5)
135 $(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-rev,OpenWRT-$(REVISION))
136 $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-generic,,)
137 $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-bc221,,--layoutver 5)
138 $(call Image/Build/CFE,$(1),6338GW,6338,6338GW-generic,,)
139 $(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,)
140 $(call Image/Build/CFE,$(1),96348GW-11,6348,96348GW-11-gen)
141 $(call Image/Build/CFE,$(1),96348GW-10,6348,96348GW-10-gen)
142
143 # BT Voyager V210_BTR
144 $(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
145 # BT Voyager V210_ROI, V210_WB
146 $(call Image/Build/CFE,$(1),V210,6348,BTV210_ROI_WB,,--layoutver 5)
147 # BT Voyager V2091_BTR
148 $(call Image/Build/CFE,$(1),V2091_BB,6348,BTV2091_BTR,,--layoutver 5)
149 # BT Voyager V2091_ROI, V2091_WB
150 $(call Image/Build/CFE,$(1),V2091,6348,BTV2091_ROI_WB,,--layoutver 5)
151 # BT Voyager V220V, V220V_MGCP_BTR
152 $(call Image/Build/CFE,$(1),RTA1052V,6348,BTV220V_MGCP_BTR,,--layoutver 5)
153 # BT Voyager V2110, V2110_AA, V2110_ROI
154 $(call Image/Build/CFE,$(1),V2110,6348,BTV2110,,--layoutver 5)
155 # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
156 $(call Image/Build/CFE,$(1),V2500V_BB,6348,BTV2500V,,--layoutver 5)
157 # RTA1025W_16 (numerous routers)
158 $(call Image/Build/CFE,$(1),RTA1025W_16,6348,RTA1025W_16,,--layoutver 5)
159 # Tecom GW6000
160 $(call Image/Build/CFEFIXUP,$(1),96348GW,6348,GW6000)
161 # Tecom GW6200
162 $(call Image/Build/CFEFIXUP,$(1),96348GW,6348,GW6200,$(shell printf '\x99'))
163 # Neufbox4
164 $(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
165 # Comtrend 536, 5621
166 $(call Image/Build/CFEFIXUP,$(1),96348GW-11,6348,CT536_CT5621)
167 # Davolink DV201AMR
168 $(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
169 # USR 9108
170 $(call Image/Build/CFE,$(1),96348GW-A,6348,USR9108)
171 # NetGear DG834GT, DG834PN
172 $(call Image/Build/CFE,$(1),96348GW-10,6348,DG834GT_DG834PN)
173 # Belkin f5d7633
174 $(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633)
175 # D-Link DSL-2640B
176 $(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B)
177 # D-Link DSL-2740B/DSL-2741B, rev C2
178 $(call Image/Build/CFE,$(1),96358GW,6358,DSL274XB-C2)
179
180 # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
181 $(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
182 # TP-Link 8900GB
183 $(call Image/Build/CFE,$(1),96348GW-11,6348,TD8900GB,$(shell printf 'PRID\x89\x10\x00\x02'))
184
185 # Sagem F@ST2404
186 $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe)
187 $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION))
188 # Inventel Livebox
189 $(call Image/Build/RedBoot,livebox)
190 # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
191 $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W-cfe)
192 $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W)
193 # Pirelli A226G
194 $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G-cfe)
195 $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G)
196
197 # RG100A,DB120 etc.
198 $(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120)
199
200 # Telsey CPVA642-type (e.g. CPA-ZNTE60T)
201 $(call Image/Build/CFE,$(1),CPVA642,6358,CPA-ZNTE60T,,--signature "Telsey Tlc",--signature2 "99.99.999",--second-image-flag "0")
202
203 # T-Com Speedport W 500V
204 $(call Image/Build/CFEFIXUP,$(1),96348GW,6348,SPW500V)
205
206 #HW553
207 $(call Image/Build/CFEHW553,$(1),HW553,6358,0x20000,HW553)
208 endef
209
210 $(eval $(call BuildImage))