[brcm63xx] build images for Pirelli A226M (#10409)
[openwrt/svn-archive/archive.git] / target / linux / brcm63xx / image / Makefile
1 #
2 # Copyright (C) 2006-2011 OpenWrt.org
3 #
4 # This is free software, licensed under the GNU General Public License v2.
5 # See /LICENSE for more information.
6 #
7 include $(TOPDIR)/rules.mk
8 include $(INCLUDE_DIR)/image.mk
9
10 LOADADDR = 0x80010000 # RAM start + 16M
11 KERNEL_ENTRY = $(LOADADDR) # Newer kernels add a jmp to the kernel_entry at the start of the binary
12 RAMSIZE = 0x01000000 # 64MB
13
14 LOADER_MAKEOPTS= \
15 KDIR=$(KDIR) \
16 LOADADDR=$(LOADADDR) \
17 KERNEL_ENTRY=$(KERNEL_ENTRY) \
18 RAMSIZE=$(RAMSIZE)
19
20 define trxalign/jffs2-128k
21 -a 0x20000
22 endef
23 define trxalign/jffs2-64k
24 -a 0x10000
25 endef
26 define trxalign/squashfs
27 -a 1024
28 endef
29
30 define Image/LimitName16
31 $(shell expr substr "$(1)" 1 16)
32 endef
33
34 define Image/Build/CFE
35 # Generate the tagged image
36 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
37 --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
38 --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
39 --load-addr $(LOADADDR) --rsa-signature "$(5)" \
40 --info1 "-$(call Image/LimitName16,$(4))" --info2 $(1) \
41 $(6) $(7) $(8) $(9)
42 endef
43
44 define Image/Build/CFEFIXUP
45 # Generate the tagged image
46 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
47 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
48 --boardid $(2) --chipid $(4) --entry $(KERNEL_ENTRY) \
49 --load-addr $(LOADADDR) --rsa-signature "$(6)" \
50 --info1 "+$(call Image/LimitName16,$(3))" --info2 $(1) \
51 $(7) $(8) $(9) $(10)
52 endef
53
54 define Image/Build/CFEHW553
55 # Generate the tagged image
56 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
57 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
58 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
59 --load-addr $(LOADADDR) --tag-version 7 \
60 --block-size 0x20000 --image-offset $(4)
61 endef
62
63 define Image/Build/CFEAGPF
64 # Generate the tagged image
65 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
66 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
67 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
68 --load-addr $(LOADADDR) --tag-version 8 \
69 --signature2 IMAGE --block-size 0x20000 \
70 --image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
71 endef
72
73 define Image/Build/RG100A
74 # Generate the tagged image
75 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
76 --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
77 --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
78 --load-addr $(LOADADDR) --block-size 0x20000 \
79 --image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
80 endef
81
82 define Image/Build/RedBoot
83 cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
84 gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
85 $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
86 dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
87 dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
88 endef
89
90 define Image/Build/SPW303V
91 # Generate the tagged image
92 $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
93 --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \
94 --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
95 --load-addr $(LOADADDR) --rsa-signature "$(5)" \
96 $(6) $(7) $(8) $(9)
97 # Fix up header
98 $(STAGING_DIR_HOST)/bin/spw303v -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \
99 -o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin
100 $(STAGING_DIR_HOST)/bin/xorimage -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin \
101 -o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-factory.bin
102 rm -f $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp
103 endef
104
105 define Image/Build/CFEOLD
106 $(TOPDIR)/scripts/brcmImage.pl -t -p \
107 -b $(2) -c $(3) \
108 -k $(KDIR)/vmlinux.lzma.cfe \
109 -r $(KDIR)/root.$(1) \
110 -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
111 endef
112
113 define Build/Clean
114 $(MAKE) -C lzma-loader clean
115 endef
116
117 define Image/Prepare
118 # Standard LZMA kernel
119 cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
120
121 # CFE is a LZMA nazi! It took me hours to find out the parameters!
122 # Also I think lzma has a bug cause it generates different output depending on
123 # if you use stdin / stdout or not. Use files instead of stdio here, cause
124 # otherwise CFE will complain and not boot the image.
125 $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
126
127 # Strip out the length, CFE doesn't like this
128 dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
129 dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
130 rm -f $(KDIR)/vmlinux.lzma.tmp
131
132 # Build the LZMA loader
133 rm -f $(KDIR)/loader.gz
134 $(MAKE) -C lzma-loader \
135 BUILD_DIR="$(KDIR)" \
136 TARGET="$(KDIR)" \
137 clean install
138
139 echo -ne "\\x00" >> $(KDIR)/loader.gz
140 rm -f $(KDIR)/fs_mark
141 touch $(KDIR)/fs_mark
142 $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
143 endef
144
145 define Image/Build
146 dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
147 # Various routers
148 $(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
149 $(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,--layoutver 5)
150 $(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-rev,OpenWRT-$(REVISION))
151 $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-generic,,)
152 $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-bc221,,--layoutver 5)
153 $(call Image/Build/CFE,$(1),6338GW,6338,6338GW-generic,,)
154 $(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,)
155 $(call Image/Build/CFE,$(1),96348GW-11,6348,96348GW-11-gen)
156 $(call Image/Build/CFE,$(1),96348GW-10,6348,96348GW-10-gen)
157
158 # BT Voyager V210_BTR
159 $(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
160 # BT Voyager V210_ROI, V210_WB
161 $(call Image/Build/CFE,$(1),V210,6348,BTV210_ROI_WB,,--layoutver 5)
162 # BT Voyager V2091_BTR
163 $(call Image/Build/CFE,$(1),V2091_BB,6348,BTV2091_BTR,,--layoutver 5)
164 # BT Voyager V2091_ROI, V2091_WB
165 $(call Image/Build/CFE,$(1),V2091,6348,BTV2091_ROI_WB,,--layoutver 5)
166 # BT Voyager V220V, V220V_MGCP_BTR
167 $(call Image/Build/CFE,$(1),RTA1052V,6348,BTV220V_MGCP_BTR,,--layoutver 5)
168 # BT Voyager V2110, V2110_AA, V2110_ROI
169 $(call Image/Build/CFE,$(1),V2110,6348,BTV2110,,--layoutver 5)
170 # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
171 $(call Image/Build/CFE,$(1),V2500V_BB,6348,BTV2500V,,--layoutver 5)
172 # RTA1025W_16 (numerous routers)
173 $(call Image/Build/CFE,$(1),RTA1025W_16,6348,RTA1025W_16,,--layoutver 5)
174 # RTA1320_16M (numerous routers)
175 $(call Image/Build/CFE,$(1),RTA1320_16M,6338,RTA1320_16M,,--layoutver 5)
176 # Tecom GW6000
177 $(call Image/Build/CFEFIXUP,$(1),96348GW,GW6000,6348,GW6000)
178 # Tecom GW6200
179 $(call Image/Build/CFEFIXUP,$(1),96348GW,GW6200,6348,GW6200,$(shell printf '\x99'))
180 # Neufbox4
181 $(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
182 # Comtrend 536, 5621
183 $(call Image/Build/CFEFIXUP,$(1),96348GW-11,CT536_CT5621,6348,CT536_CT5621)
184 # Davolink DV201AMR
185 $(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
186 # USR 9108
187 $(call Image/Build/CFE,$(1),96348GW-A,6348,USR9108)
188 # NetGear DG834GT, DG834PN
189 $(call Image/Build/CFE,$(1),96348GW-10,6348,DG834GT_DG834PN)
190 # Belkin f5d7633
191 $(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633)
192 # D-Link DSL-2640B, rev B2
193 $(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B-B2)
194 # D-Link DSL-2740B/DSL-2741B, rev C2
195 $(call Image/Build/CFEFIXUP,$(1),96358GW,AW4139,6358,DSL274XB-C2)
196 # D-Link DSL-2740B/DSL-2741B, rev C3
197 $(call Image/Build/CFE,$(1),AW4139,6358,DSL274XB-C3)
198 # D-Link DVA-G3810BN/TL
199 $(call Image/Build/CFE,$(1),96358GW,6358,DVAG3810BN)
200
201 # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
202 $(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
203 # TP-Link 8900GB
204 $(call Image/Build/CFE,$(1),96348GW-11,6348,TD8900GB,$(shell printf 'PRID\x89\x10\x00\x02'))
205
206 # Sagem F@ST2404
207 $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe)
208 $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION))
209 # Inventel Livebox
210 $(call Image/Build/RedBoot,livebox)
211 # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
212 $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W-cfe)
213 $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W)
214 # Pirelli A226G
215 $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G-cfe)
216 $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G)
217
218 # Pirelli A226M
219 $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x20000,A226M-cfe)
220 $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x20000,A226M)
221
222 # RG100A,DB120 etc.
223 $(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120)
224
225 # Telsey CPVA642-type (e.g. CPA-ZNTE60T)
226 $(call Image/Build/CFE,$(1),CPVA642,6358,CPA-ZNTE60T,,--signature "Telsey Tlc",--signature2 "99.99.999",--second-image-flag "0")
227
228 # T-Com Speedport W 500V
229 $(call Image/Build/CFEFIXUP,$(1),96348GW,SPW500V,6348,SPW500V)
230
231 #HW553
232 $(call Image/Build/CFEHW553,$(1),HW553,6358,0x20000,HW553)
233
234 # T-Com Speedport W 303V Typ B
235 $(call Image/Build/SPW303V,$(1),96358-502V,6358,SPW303V)
236 endef
237
238 $(eval $(call BuildImage))