target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch

   1 From: Marcin Jurkowski <marcin1j@gmail.com>
   2 Date: Thu, 31 Oct 2013 22:33:10 +0000
   3 Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
   4  router
   5
   6 This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
   7 router.
   8 It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
   9 modem equipped with 64 MiB RAM and 8 MiB flash.
  10
  11 Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
  12 ---
  13 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
  14 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
  15 @@ -660,6 +660,122 @@ static struct board_info __initdata boar
  16                 },
  17         },
  18  };
  19 +
  20 +static struct board_info __initdata board_FAST2704V2 = {
  21 +       .name                           = "F@ST2704V2",
  22 +       .expected_cpu_id                = 0x6328,
  23 +
  24 +       .has_uart0                      = 1,
  25 +       .has_pci                        = 1,
  26 +       .has_ohci0                      = 1,
  27 +       .has_ehci0                      = 1,
  28 +       .has_usbd                       = 1,
  29 +
  30 +       .has_enetsw                     = 1,
  31 +
  32 +       .enetsw = {
  33 +               .used_ports = {
  34 +                       [0] = {
  35 +                               .used   = 1,
  36 +                               .phy_id = 1,
  37 +                               .name   = "Port 1",
  38 +                       },
  39 +                       [1] = {
  40 +                               .used   = 1,
  41 +                               .phy_id = 2,
  42 +                               .name   = "Port 2",
  43 +                       },
  44 +                       [2] = {
  45 +                               .used   = 1,
  46 +                               .phy_id = 3,
  47 +                               .name   = "Port 3",
  48 +                       },
  49 +                       [3] = {
  50 +                               .used   = 1,
  51 +                               .phy_id = 4,
  52 +                               .name   = "Port 4",
  53 +                       },
  54 +               },
  55 +       },
  56 +
  57 +       .leds = {
  58 +               /* front LEDs */
  59 +               {
  60 +                       .name                   = "F@ST2704V2:green:power",
  61 +                       .gpio                   = 4,
  62 +                       .active_low             = 1,
  63 +                       .default_trigger        = "default-on",
  64 +               },
  65 +               {
  66 +                       .name                   = "F@ST2704V2:red:power",
  67 +                       .gpio                   = 5,
  68 +                       .active_low             = 1,
  69 +               },
  70 +               {
  71 +                       .name                   = "F@ST2704V2:red:inet",
  72 +                       .gpio                   = 2,
  73 +                       .active_low             = 1,
  74 +               },
  75 +               {
  76 +                       .name                   = "F@ST2704V2:green:dsl",
  77 +                       .gpio                   = 3,
  78 +                       .active_low             = 1,
  79 +               },
  80 +               {
  81 +                       .name                   = "F@ST2704V2:green:inet",
  82 +                       .gpio                   = 11,
  83 +                       .active_low             = 1,
  84 +               },
  85 +               {
  86 +                       .name                   = "F@ST2704V2:green:usb",
  87 +                       .gpio                   = 1,
  88 +                       .active_low             = 1,
  89 +               },
  90 +
  91 +               /* side button LEDs */
  92 +               {
  93 +                       .name                   = "F@ST2704V2:green:wps",
  94 +                       .gpio                   = 10,
  95 +                       .active_low             = 1,
  96 +               },
  97 +
  98 +               /* FIXME: can't control gpio0 line in "out" state, needs further investigation */
  99 +               /*
 100 +               {
 101 +                       .name                   = "F@ST2704V2:green:rfkill",
 102 +                       .gpio                   = 0,
 103 +                       .active_low             = 1,
 104 +               },
 105 +               */
 106 +
 107 +       },
 108 +       .buttons = {
 109 +               {
 110 +                       .desc                   = "reset",
 111 +                       .gpio                   = 23,
 112 +                       .active_low             = 1,
 113 +                       .type                   = EV_KEY,
 114 +                       .code                   = KEY_RESTART,
 115 +                       .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 116 +               },
 117 +               {
 118 +                       .desc                   = "wps",
 119 +                       .gpio                   = 24,
 120 +                       .active_low             = 1,
 121 +                       .type                   = EV_KEY,
 122 +                       .code                   = KEY_WPS_BUTTON,
 123 +                       .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 124 +               },
 125 +               {
 126 +                       .desc                   = "rfkill",
 127 +                       .gpio                   = 15,
 128 +                       .active_low             = 1,
 129 +                       .type                   = EV_KEY,
 130 +                       .code                   = KEY_WLAN,
 131 +                       .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 132 +               },
 133 +       },
 134 +};
 135  #endif /* CONFIG_BCM63XX_CPU_6328 */
 136
 137  /*
 138 @@ -3502,6 +3618,7 @@ static const struct board_info __initcon
 139         &board_963281TAN,
 140         &board_A4001N1,
 141         &board_dsl_274xb_f1,
 142 +       &board_FAST2704V2,
 143  #endif
 144  #ifdef CONFIG_BCM63XX_CPU_6338
 145         &board_96338gw,
 146 @@ -3576,6 +3693,7 @@ static struct of_device_id const bcm963x
 147         { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
 148         { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
 149         { .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
 150 +       { .compatible = "sagem,f@st2704v2", .data = &board_FAST2704V2, },
 151  #endif
 152  #ifdef CONFIG_BCM63XX_CPU_6338
 153         { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },