target/linux/brcm63xx/patches-3.18/561-board_WAP-5813n.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -14,7 +14,9 @@
   4  #include <linux/input.h>
   5  #include <linux/pci_ids.h>
   6  #include <linux/platform_device.h>
   7 +#include <linux/platform_data/b53.h>
   8  #include <linux/rtl8367.h>
   9 +#include <linux/spi/spi.h>
  10  #include <asm/addrspace.h>
  11  #include <bcm63xx_board.h>
  12  #include <bcm63xx_cpu.h>
  13 @@ -1899,6 +1901,65 @@ static struct board_info __initdata boar
  14         .has_ohci0 = 1,
  15         .has_ehci0 = 1,
  16  };
  17 +
  18 +static struct b53_platform_data WAP5813n_b53_pdata = {
  19 +       .alias = "eth0",
  20 +};
  21 +
  22 +static struct spi_board_info WAP5813n_spi_devices[] = {
  23 +       {
  24 +               .modalias = "b53-switch",
  25 +               .max_speed_hz = 781000,
  26 +               .bus_num = 0,
  27 +               .chip_select = 0,
  28 +               .platform_data = &WAP5813n_b53_pdata,
  29 +       }
  30 +};
  31 +
  32 +static struct sprom_fixup __initdata wap5813n_fixups[] = {
  33 +       { .offset = 97, .value = 0xfeed },
  34 +       { .offset = 98, .value = 0x15d1 },
  35 +       { .offset = 99, .value = 0xfb0d },
  36 +       { .offset = 113, .value = 0xfef7 },
  37 +       { .offset = 114, .value = 0x15f7 },
  38 +       { .offset = 115, .value = 0xfb1a },
  39 +};
  40 +
  41 +static struct board_info __initdata board_WAP5813n = {
  42 +       .name                           = "96369R-1231N",
  43 +       .expected_cpu_id                = 0x6368,
  44 +
  45 +       .has_uart0                      = 1,
  46 +       .has_pci                        = 1,
  47 +       .use_fallback_sprom             = 1,
  48 +       .has_ohci0                      = 1,
  49 +       .has_ehci0                      = 1,
  50 +
  51 +       .has_enetsw                     = 1,
  52 +       .enetsw = {
  53 +               .used_ports = {
  54 +                       [4] = {
  55 +                               .used = 1,
  56 +                               .phy_id = 0xff,
  57 +                               .bypass_link = 1,
  58 +                               .force_speed = 1000,
  59 +                               .force_duplex_full = 1,
  60 +                               .name = "RGMII",
  61 +                       },
  62 +               },
  63 +       },
  64 +
  65 +       .fallback_sprom = {
  66 +               .type                           = SPROM_BCM43222,
  67 +               .pci_bus                        = 0,
  68 +               .pci_dev                        = 1,
  69 +               .board_fixups                   = wap5813n_fixups,
  70 +               .num_board_fixups               = ARRAY_SIZE(wap5813n_fixups),
  71 +       },
  72 +
  73 +       .spis = WAP5813n_spi_devices,
  74 +       .num_spis = ARRAY_SIZE(WAP5813n_spi_devices),
  75 +};
  76  #endif /* CONFIG_BCM63XX_CPU_6368 */
  77
  78  /*
  79 @@ -2213,6 +2274,7 @@ static const struct board_info __initcon
  80  #ifdef CONFIG_BCM63XX_CPU_6368
  81         &board_96368mvwg,
  82         &board_96368mvngr,
  83 +       &board_WAP5813n,
  84  #endif
  85  #ifdef CONFIG_BCM63XX_CPU_63268
  86         &board_963268bu_p300,
  87 @@ -2295,6 +2357,7 @@ static struct of_device_id const bcm963x
  88  #ifdef CONFIG_BCM63XX_CPU_6368
  89         { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
  90         { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
  91 +       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
  92  #endif
  93  #ifdef CONFIG_BCM63XX_CPU_63268
  94         { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, },